Indledning
This manual provides essential information for the installation, operation, and maintenance of your Okin Refined-R Model JLDQ.11.156.204D Recliner Motor. This motor is an original Okin JLDQ series product designed for power recliners, electric sofas, and lift chairs. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Sikkerhedsoplysninger
- Always disconnect power before attempting any installation, maintenance, or troubleshooting.
- Sørg for, at alle forbindelser er sikre og korrekte, før du genopretter strømmen.
- This motor is designed for indoor use only.
- Do not operate the motor if any part is damaged or if it has been exposed to water.
- Hold hænder og løstsiddende tøj væk fra bevægelige dele under drift.
- Refer to a qualified technician if you are unsure about any installation or repair procedures.
Produkt overview og funktioner
The Okin JLDQ.11.156.204D motor is a robust linear actuator designed for various reclining furniture applications. It is compatible with several JLDQ series models, including JLDQ.11.156.204D02/D04/D05/D05-JY/D06/D09, and JLDQ.11.156.204F/N series. Minor differences in plug location do not affect functionality.
Figur 1: Overview of the Okin JLDQ.11.156.204D Recliner Motor, showing its linear actuator design and attached cables.
Figure 2: Close-up of the motor's identification label, showing "MODEL:JLDQ-11" and "JLDQ.11.156.204D". The serial number Q23071221 00030 is also visible. For patent information, visit dewertokin.com/patents.
Figure 3: The two connectors included with the motor: a 2-pin plug for power supply and a 5-pin round plug for the recliner switch hand control.
Figure 4: The Okin motor shown in context with a recliner, illustrating its application.
Nøglefunktioner:
- Consists of 1 motor and 2 connectors.
- Appearance: Black (PA) and Silver White (Aluminum).
- Stroke: 204 mm.
- Minimum Installation Size (shrink): 156 mm.
- Maximum Installation Size: 360 mm.
- Load Capacity: Push force: 1500 N, Pull force: 1500 N.
- Operation Frequency: On 1 min / Off 8 min.
Opsætning og installation
Before installation, ensure the new motor matches the brand and model of your existing recliner motor. Different actuators may not be compatible with your furniture's frame due to strict demands on minimum installation dimensions, stroke, and plugs.
- Afbryd strømmen: Unplug the recliner from the wall outlet.
- Adgangsmotor: Carefully turn the recliner over or tilt it to access the existing motor and wiring.
- Fjern den gamle motor: Disconnect the power supply and hand control cables from the old motor. Unbolt or unclip the old motor from the recliner frame. Note the orientation and mounting points.
- Installer ny motor: Position the new Okin motor in the same location as the old one. Secure it to the recliner frame using appropriate bolts or clips. Ensure it is firmly attached.
- Tilslut kabler:
- Connect the 2-pin square plug with clip to the power supply.
- Connect the 5-pin round plug to the switch hand control.
Figure 5: The Okin motor with its power and control cables properly connected, ready for installation.
- Bekræft forbindelser: Dobbelttjek alle forbindelser for at sikre, at de er sikre og korrekt monteret.
- Gendan strøm: Once all connections are verified, plug the recliner back into the wall outlet.
Betjeningsvejledning
After successful installation, operate your recliner using its standard hand control. The Okin motor will respond to the commands from the hand control to extend or retract the recliner mechanism.
- Press and hold the appropriate button on your hand control to recline or return the chair to its upright position.
- Release the button to stop the movement at any desired position.
- Avoid continuous operation for more than 1 minute to prevent overheating. Allow 8 minutes of rest after 1 minute of operation.
Opretholdelse
The Okin recliner motor is designed for durability and requires minimal maintenance. Regular checks can help ensure its longevity.
- Rensning: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use liquid cleaners directly on the motor.
- Kabelinspektion: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure plugs are securely seated.
- Smøring: The motor is pre-lubricated and generally does not require additional lubrication. If you notice unusual friction in the recliner mechanism, consult your furniture's manual or a professional.
Fejlfinding
Hvis din lænestol ikke fungerer korrekt efter udskiftning af motoren, skal du følge disse fejlfindingstrin:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motoren virker ikke. | No power, loose connection, faulty hand control, or faulty power supply. |
|
| Motor operates intermittently. | Loose connection, overheating, or internal motor issue. |
|
| Motoren laver usædvanlige lyde. | Obstruction, worn gears, or internal damage. |
|
If troubleshooting steps do not resolve the issue, please contact Okin customer support or a qualified technician.
Specifikationer
| Attribut | Værdi |
|---|---|
| Model | JLDQ.11.156.204D |
| Belastning (tryk-/trækkraft) | 1500 N (approx. 337 lbs) |
| Slagtilfælde | 204 mm (ca. 8.03 tommer) |
| Minimum Installation Size (Shrink) | 156 mm (ca. 6.14 tommer) |
| Maksimal installationsstørrelse | 360 mm (ca. 14.17 tommer) |
| Driftsfrekvens | Tændt 1 min / Slukket 8 min |
| Udseende | Sort (PA), Sølv Hvid (Aluminium) |
| Varens vægt | 5.59 pund |
| Pakkedimensioner | 23.5 x 8.5 x 5.25 tommer |
Garanti og support
For warranty information and customer support, please refer to the official Okin website or contact your point of purchase. Ensure you have your product model number (JLDQ.11.156.204D) and any purchase details available when seeking support.
Visit the official Okin Store for more products and information: Okin-butikken på Amazon.
