WORKPRO 20V Electric Drain Auger Instruction Manual

Indledning

The WORKPRO 20V Electric Drain Auger is a professional-grade cordless tool designed for efficient and convenient drain clearing. With its powerful motor and flexible cable, it effectively removes stubborn clogs in various plumbing systems, including sinks, toilets, sewers, and bathtubs. Its lightweight and cordless design enhances portability and practicality for both professional and home use.

Sikkerhedsoplysninger

Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade. Gem alle advarsler og instruktioner til senere brug.

Wear appropriate personal protective equipment, including gloves and eye protection, when operating the drain auger.
Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
Brug ikke værktøjet i våde omgivelser eller i nærheden af brandfarlige væsker eller gasser.
Keep hands and loose clothing away from the rotating cable and drum.
Frakobl altid batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
Dette produkt indeholder kemikalier, der af staten Californien vides at forårsage kræft og fødselsdefekter eller anden reproduktionsskade.

Produktkomponenter

WORKPRO 20V Electric Drain Auger with battery, charger, and tool bag

Figure 1: The WORKPRO 20V Electric Drain Auger, including the main unit, 2.0Ah battery, charger, and tool bag.

The WORKPRO 20V Electric Drain Auger set includes:

20V Electric Drain Auger Unit
2.0Ah Rechargeable Lithium-Ion Battery
Hurtig oplader
Værktøjstaske

Dele diagram

Diagram of WORKPRO 20V Electric Drain Auger with labeled parts: Front Operating Handle, Forward/Reverse Lever, Variable Speed Switch Trigger, Cable, LED Work Light, Drum.

Figure 2: Key components of the WORKPRO 20V Electric Drain Auger.

Familiarize yourself with the following parts of your drain auger:

Front Operating Handle: Used to control the feed direction of the cable.
Frem/bak-håndtag: Toggles the rotation direction of the cable (clockwise/counter-clockwise).
Variable Speed Switch Trigger: Controls the speed of the cable rotation.
Kabel: The flexible snake that extends into the drain to clear clogs.
LED arbejdslys: Oplyser mørke arbejdsområder.
Tromme: Houses the coiled cable.
Rear Water Drain Port: Allows for easy draining and cleaning of the drum.

Opsætning

Opladning af batteriet

WORKPRO 20V 2.0Ah Lithium-Ion battery being charged by the 2.4A fast charger.

Figure 3: Charging the 20V 2.0Ah Lithium-Ion battery.

Before first use, fully charge the 2.0Ah lithium-ion battery. The quick charger can fully recharge the battery in approximately 1 hour. Ensure the battery is securely inserted into the charger and the charger is connected to a power outlet.

Montering af batteriet

Once charged, slide the battery pack into the base of the drain auger until it clicks securely into place.

Betjeningsvejledning

The WORKPRO Electric Drain Auger is designed for pipes ranging from 3/4 inches up to 2 inches in width, with a 25-foot (7.6m) cable. The olive-shaped head is ideal for navigating L, S, and U bends.

Diagram showing the flexible cable of the WORKPRO drain auger navigating a pipe with an olive-shaped head.

Figure 4: The flexible cable and olive-shaped head are designed for various pipe configurations.

Grundlæggende betjeningstrin:

Forbered området: Clear the drain opening and ensure you have a bucket or container ready to catch any debris or water.
Indsæt kablet: Manually feed the cable into the drain opening. For best results, ensure at least 4 inches of cable are extended from the drum before starting the motor.
Vælg retning: Use the Forward/Reverse Lever to select the desired rotation direction (Forward for extending the cable, Reverse for retracting).
Engage and Feed:
- To feed the cable forward, press the Front Operating Handle forward (towards the cable exit).
- To retract the cable, pull the Front Operating Handle backward (towards the handle).
Kontrol hastighed: Press the Variable Speed Switch Trigger to start the motor and control the cable's rotation speed. Adjust the speed as needed for different types of clogs.
Fjern tilstopningen: Slowly feed the cable into the drain, allowing the rotating head to break up and clear the obstruction. If the cable encounters resistance, gently work it back and forth.
Træk kablet tilbage: Once the clog is cleared, switch the Forward/Reverse Lever to Reverse and pull the Front Operating Handle backward to retract the cable.
Ryd op: After use, clean the cable and the drum thoroughly.

Four-step diagram showing operation of the WORKPRO drain auger: 1. Press Lever 'R', 2. Set Front Operating Handle to 'F', 3. Press Variable Speed Switch, 4. Start to Work (inserting cable into drain).

Figure 5: Visual guide to operating the drain auger.

Person using the WORKPRO drain auger to clear a sink drain, with the built-in LED light illuminating the drain.

Figure 6: The built-in LED light provides illumination in dark areas.

Opretholdelse

Proper maintenance ensures the longevity and optimal performance of your WORKPRO Electric Drain Auger.

Rengøring af tromlen: After each use, especially when dealing with dirty drains, utilize the rear water drain port to clean and drain the drum. This helps prevent rust and buildup inside the unit.

Close-up of the rear water drain port on the WORKPRO drain auger, highlighting its function for cleaning the drum.

Figure 7: The rear water drain port for easy cleaning.

Kabelpleje: Clean any debris from the cable after each use. If the cable becomes kinked or damaged, it may need to be replaced to ensure safe and effective operation.
Batteriopbevaring: Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to charge the battery to about 50% capacity.
Generel rengøring: Tør værktøjets yderside af med enamp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.

Fejlfinding

Problem	Mulig årsag	Løsning
Værktøjet tænder ikke.	Batteriet er ikke opladet eller ikke isat korrekt.	Sørg for, at batteriet er fuldt opladet og klikket sikkert på plads.
Cable does not extend or retract.	Forward/Reverse Lever not engaged or Front Operating Handle not pushed/pulled.	Ensure the Forward/Reverse Lever is set to 'F' (Forward) or 'R' (Reverse) and the Front Operating Handle is correctly manipulated.
Cable gets stuck or tangled in the drum.	Improper operation, forcing the cable, or cable damage.	Do not force the cable. Ensure the Front Operating Handle is used correctly to feed/retract the cable. If tangled, carefully open the drum (refer to advanced maintenance if applicable) and untangle. If cable is damaged, replace it.
Ineffective clog removal.	Wrong cable size for pipe, severe clog, or incorrect technique.	Verify pipe diameter is within 3/4"-2" range. Try adjusting speed and gently working the cable. For very stubborn clogs, multiple passes or professional assistance may be required.

Specifikationer

Modelnummer: W125241AE
Strømkilde: 20V litium-ion-batteri (inkluderet)
Kabellængde: 25 fod (7.6 m)
Applicable Pipe Diameter: 3/4" - 2"
Max RPM: Op til 560 omdr./min
Varens vægt: 11.68 pund
Produktdimensioner: 16.3 x 8.3 x 10.2 tommer
Farve: Grå
Fabrikant: Hang Zhou Great Star Industrial Co., Ltd.

Kundeservice og support

If you have any questions or require assistance with your WORKPRO 20V Electric Drain Auger, please contact WORKPRO customer service. We are dedicated to answering your questions and welcome any comments or suggestions you may have.

Please refer to your product packaging or the official WORKPRO webhjemmeside for de seneste kontaktoplysninger.

	WORKPRO 20V elektrisk afløbssnegl: Sikkerheds- og betjeningsvejledning Detaljerede sikkerheds-, drifts-, vedligeholdelses- og bortskaffelsesinstruktioner for WORKPRO 20V elektrisk afløbssnegl (model W125241A). Lær, hvordan du bruger værktøjet sikkert, oplader batteriet, fjerner forhindringer og vedligeholder udstyret.
	WORKPRO 20V batteridrevet minirundsav Sikkerheds- og betjeningsvejledning Dette dokument indeholder sikkerheds- og betjeningsinstruktioner til WORKPRO 20V batteridrevet minirundsav. Det dækker generelle sikkerhedsadvarsler, elektrisk sikkerhed, personlig sikkerhed, brug og pleje af elværktøj, service, brug og pleje af batteriværktøj, sikkerhed ved opladning, årsager og advarsler om tilbageslag, nederste beskyttelsesskærms funktion, symboler, tekniske data, montering, betjening og rengøring/vedligeholdelse.
	WORKPRO 20V 2.0Ah Lithium-Ion Batteripakke Brugsanvisning Officiel betjeningsvejledning og sikkerhedsvejledning til WORKPRO 20V 2.0 Ah lithium-ion-batteripakken (model W126070A). Lær om sikker brug, opladning, opbevaring og bortskaffelse.
	WORKPRO 20V børsteløs akku-excentersliber - Brugsanvisning Officiel betjeningsvejledning til WORKPRO 20V børsteløs akku-excentersliber (model W125228A), der dækker sikkerhed, betjening, vedligeholdelse og specifikationer.
	WORKPRO W125042A 20V batteridrevet slagnøgle brugermanual Officiel betjeningsvejledning og sikkerhedsvejledning til WORKPRO W125042A 20V batteridrevet slagnøgle. Lær om korrekt brug, vedligeholdelse, tekniske specifikationer og fejlfinding.
	WORKPRO 20V 2.0Ah Lithium-ion batteripakke - Betjenings- og sikkerhedsinstruktioner Officielle betjenings- og sikkerhedsinstruktioner til WORKPRO 20V 2.0Ah lithium-ion-batteripakken. Lær om korrekt brug, opladning, opbevaring og bortskaffelse for at sikre sikkerhed og levetid. Indeholder advarsler og miljøretningslinjer.

WORKPRO W125241AE