KoolMore KM-RPPS-3DSS 92-inch Three-Door Commercial Pizza Prep Table User Manual

Indledning

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your KoolMore KM-RPPS-3DSS Commercial Pizza Prep Table. Please read this manual thoroughly before installation and use, and retain it for future reference. This unit is designed for commercial food preparation and storage, featuring a refrigerated topping station, a built-in cutting board, and cold storage beneath.

Sikkerhedsoplysninger

Følg altid grundlæggende sikkerhedsforanstaltninger, når du bruger dette apparat, for at mindske risikoen for brand, elektrisk stød eller personskade.

• Sørg for, at enheden er korrekt jordet.
• Brug ikke med et beskadiget netledning eller stik.
• Hold ventilationsåbningerne fri af forhindringer.
• Opbevar ikke eksplosive stoffer såsom spraydåser med et brændbart drivmiddel i dette apparat.
• Kun kvalificeret personale bør udføre reparationer.
• This appliance uses R290 refrigerant. Handle with care and ensure proper ventilation during servicing.

Opsætning og installation

Udpakning

Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and supplier. Retain packaging materials for inspection.

Placering

• Place the unit on a strong, level surface capable of supporting its weight (approximately 565 lbs).
• Ensure adequate clearance around the unit for proper ventilation, especially around the compressor compartment.
• Undgå direkte sollys eller nærhed til varmegenererende udstyr.
• The unit is equipped with rolling casters for easy positioning. Lock the casters once the unit is in its final location.

Elektrisk tilslutning

Connect the unit to a dedicated 120 Volt, 60 Hz, single-phase grounded electrical outlet. Do not use extension cords or adapter plugs. Ensure the electrical supply matches the requirements specified on the unit's data plate.

Indledende rengøring

Before initial use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry. Install the included shelves.

Billede: Forside view of the KoolMore KM-RPPS-3DSS pizza prep table with food pans in the topping station and items on the cutting board.

Billede: Forside view of the KoolMore KM-RPPS-3DSS pizza prep table with the food protection lids closed.

Betjeningsvejledning

Tænder

After installation and initial cleaning, plug in the unit. The digital temperature controller will display the current internal temperature. Allow the unit to run for several hours to reach the desired operating temperature before loading with food products.

Temperaturkontrol

The unit is designed to maintain temperatures between 33°F and 40°F (0.5°C and 4.4°C). Adjust the temperature using the digital controller located on the front of the unit. Refer to the controller's specific instructions for detailed programming.

Food Pan Usage

The top rail accommodates up to twelve food pans (sold separately). Place prepared ingredients in these pans for easy access during food preparation. Ensure the food protection lids are closed when the pans are not actively in use to maintain cold temperatures and food safety.

Billede: Nærbillede view of the food pan section of the KoolMore KM-RPPS-3DSS pizza prep table, showing various ingredients.

Skærebræt

Utilize the integrated 92-inch cutting board for food preparation tasks. Keep the cutting board clean and sanitized between uses to prevent cross-contamination.

Køleopbevaring

The three-door refrigerated compartment below the work surface provides additional cold storage. Organize items on the adjustable wire shelves. Ensure doors are closed securely after each access to maintain internal temperatures.

Billede: Interiør view of the KoolMore KM-RPPS-3DSS pizza prep table with all three doors open, revealing the wire shelves inside.

Opretholdelse

Daglig rengøring

• Clean the cutting board and food pan area with a food-safe cleaner and sanitizer.
• Tør alle overflader i rustfrit stål af med enamp klud og et mildt rengøringsmiddel. Tør grundigt for at undgå vandpletter.

Ugentlig/Månedlig rengøring

• Clean the interior of the refrigerated compartments, including shelves.
• Inspect door gaskets for tears or damage and clean them to ensure a proper seal.
• Clean the condenser coil (located in the compressor compartment) to ensure efficient operation. This should be done by qualified personnel or by following specific instructions in a more detailed service manual. A dirty condenser coil can lead to increased energy consumption and reduced cooling performance.

Optøningssystem

This unit features an automatic defrost system. Ice buildup on the evaporator coil will be periodically melted and drained. Ensure the drain line is clear and free of obstructions.

Fejlfinding

For issues not listed or if troubleshooting steps do not resolve the problem, contact KoolMore customer support or a qualified service technician.

Specifikationer

Image: Diagram showing the dimensions of the KoolMore KM-RPPS-3DSS pizza prep table.

Garanti og support

For warranty information, please refer to the documentation provided with your purchase or visit the official KoolMore website. For technical support, parts, or service inquiries, please contact KoolMore customer service. Ensure you have your model number (KM-RPPS-3DSS) and purchase date available when contacting support.

KoolMore kundeservice: www.koolmore.com/support (Eksamplinket, det faktiske link kan variere)