DBPOWER G60 4000A Portable Jump Starter User Manual

1. Vigtige sikkerhedsoplysninger

Læs og forstå alle sikkerhedsoplysninger, før du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.

• Opbevares utilgængeligt for børn.
• Brug ikke enheden, hvis den er beskadiget.
• Do not expose the unit to water or extreme temperatures.
• Sørg for tilstrækkelig ventilation under brug og opladning.
• Tilslut altid smart-cl'enamps correctly to the battery terminals (red to positive, black to negative).
• Undgå kortslutning af smart-klokkenamps.
• Forsøg ikke at sætte gang i et frosset batteri.
• Se din bils instruktionsbog for specifikke procedurer for starthjælp.

Integrated Safety Protection System

The DBPOWER G60 is equipped with a comprehensive safety protection system to ensure safe operation:

• Omvendt polaritetsbeskyttelse: Prevents damage if clamps er forbundet forkert.
• Spark-Proof Protection: Eliminates sparks during connection.
• Zero-Damage Protection: Protects the device and vehicle from damage.
• Overtemperaturbeskyttelse: Slukker ned, hvis den indre temperatur overstiger sikre grænser.
• Auto Shutoff Protection: Automatically turns off after a period of inactivity.
• Lav voltage Beskyttelse: Prevents over-discharge of the internal battery.
• Reverse Charge Protection: Prevents current flow back into the jump starter from the vehicle battery.
• Overstrømsbeskyttelse: Beskytter mod for højt strømforbrug.
• Over Voltage Beskyttelse: Beskyttelsesforanstaltninger mod voltage pigge.
• Kortslutningsbeskyttelse: Forhindrer skader fra kortslutninger.

Billede: Overview of the DBPOWER G60's integrated safety protection systems.

2. Produktet er slutview

Pakkens indhold

The DBPOWER G60 package includes the following items:

• DBPOWER G60 Jump Starter
• Smart Jump Cable (with clamps)
• USB Type-C opladerkabel
• Opbevaringspose
• Brugervejledning (dette dokument)

Image: Contents of the DBPOWER G60 Jump Starter package.

Enhedsfunktioner

The DBPOWER G60 is a versatile device designed for vehicle jump-starting and portable power needs.

• Jumpstarter: 4000A peak current, capable of starting all gasoline engines and up to 10.0L diesel engines. Provides up to 60 jump starts on a single charge.
• Power Bank: 88.8Wh capacity with multiple output ports:
  • 2 USB outputs (5V/9V/12V and 5V/2.1A)
  • 1 DC output (12-16.8V/10A)
  • 1 Type-C in/out port (5V/3A)
• LED lommelygte: Super bright LED light with 3 modes: lighting, flash, and SOS.
• Holdbarhed: Rugged ABS material, waterproof, dustproof, and drop-proof design.

Image: Multifunctionality and port layout of the DBPOWER G60.

3. Opsætning og opladning

Indledende opladning

Before first use, fully charge the DBPOWER G60. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.

• Connect the included USB Type-C charging cable to the Type-C input port on the jump starter.
• Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or a car charger.
• The LED indicator lights on the jump starter will illuminate to show the charging progress. All lights will be solid when fully charged.

Image: Charging the DBPOWER G60 with a wall charger (not included).

Image: Recharging the DBPOWER G60 while driving using a car's USB port.

4. Betjeningsvejledning

4.1 Jumpstart af et køretøj

The DBPOWER G60 can jump start 12V vehicles with all gasoline engines and up to 10.0L diesel engines.

1. Klargør køretøjet: Ensure the vehicle's ignition is off and all accessories (lights, radio, A/C) are turned off. Place the vehicle in park (automatic) or neutral (manual) and engage the parking brake.
2. Connect Smart Clamps: Insert the blue plug of the smart jump cable into the jump start output port on the DBPOWER G60. Ensure a secure connection.
3. Fastgør til batteri:
   • Tilslut rød (+) clamp til køretøjets positive (+) batteripol.
   • Tilslut sort (-) clamp til køretøjets negative (-) batteripol.

   The indicator light on the smart clamp will show the connection status. A solid green light indicates a correct and ready connection.

4. Start køretøjet: Once the smart clamp indicator is green, start your vehicle's engine. If the vehicle does not start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
5. Fjern Clamps: After the vehicle starts, immediately remove the smart clamps from the vehicle battery, then disconnect the smart cable from the jump starter.

Force Start Function (for 0V Dead Batteries)

If your vehicle's battery is completely dead (0V) and the smart clamp indicator does not turn green, you can use the force start function. Ensure the jump starter is fully charged or above 12V before attempting this.

• Tilslut smart clamps to the vehicle battery as described above.
• Press and hold the "Force Start" button on the smart clamp (refer to the smart clamp for button location). The indicator light will change to a solid green.
• Start køretøjet inden for 30 sekunder.
• Immediately remove the clampefter køretøjet er startet.

Image: Simple steps for jump starting your car with the DBPOWER G60.

Image: Vehicle compatibility and jump-starting capacity of the DBPOWER G60.

4.2 Brug som powerbank

The DBPOWER G60 can charge various electronic devices and power 12V accessories.

• USB-udgange: Connect your smartphone, tablet, camera, or other USB-powered devices to the 5V/9V/12V or 5V/2.1A USB output ports using an appropriate charging cable.
• Type-C port: Use the 5V/3A Type-C port for charging compatible devices or for recharging the jump starter itself.
• DC-udgang: The 12-16.8V/10A DC output can power 12V car accessories such as tire inflators, car vacuum cleaners, or car refrigerators.

Image: The DBPOWER G60 functioning as an 88.8Wh power bank for various devices.

Image: Using the 16V DC output to power a tire inflator.

4.3 Brug af LED-lommelygten

Den integrerede LED-lommelygte tilbyder tre tilstande til forskellige situationer:

• Lystilstand: Press the power button once to turn on the flashlight for general illumination.
• Strobetilstand: Press the power button again to activate the strobe light, useful for signaling or attracting attention.
• SOS-tilstand: Press the power button a third time to activate the SOS signal, which flashes in a standard Morse code pattern for emergency situations.
• Tryk på tænd/sluk-knappen en fjerde gang for at slukke lommelygten.

Image: The DBPOWER G60's LED flashlight with three modes: Light, Strobe, and SOS.

5. Vedligeholdelse og opbevaring

• Genopladning: For optimal performance and battery longevity, recharge the jump starter at least once every 3-6 months, even if it has not been used.
• Rensning: Tør enheden af ​​med en tør, blød klud. Brug ikke skrappe kemikalier eller slibende materialer.
• Opbevaring: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures. The unit is designed to withstand temperatures from -4°F to 140°F (-20°C to 60°C).
• Holdbarhed: The rugged ABS material provides waterproof, dustproof, and drop-proof protection, making it suitable for various environments.

Image: The DBPOWER G60 is built to withstand extreme weather conditions.

6. Fejlfinding

If you encounter issues with your DBPOWER G60, refer to the following common problems and solutions:

7. Tekniske specifikationer

8. Garanti og support

DBPOWER products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official DBPOWER webwebsted.

If you have any questions, concerns, or require technical assistance, please contact DBPOWER customer support. Our team is available to assist you and aims to reply within 24 hours.

For support, besøg venligst: DBPOWER Official Store on Amazon