HF1.0 Dual Bluetooth v5.0 User Manual

Indledning

The Twiins HF1.0 Dual Bluetooth v5.0 headset is designed to provide an affordable, hands-free communication solution for riders. It allows you to connect to your cell phone for calls, music, and navigation input, enhancing your riding experience while keeping your focus on the road. This manual provides detailed instructions for installation, operation, and maintenance of your HF1.0 headset.

Hvad er der i æsken

Upon unboxing your HF1.0 Dual Bluetooth v5.0 headset, please ensure all the following components are present:

• HF1.0 Dual Bluetooth Headset (integrated microphone and speaker)
• Brugermanual
• Ear Cushions (Foam speaker covers with Velcro)

Image: The Twiins HF1.0 Dual Bluetooth headset, showing the main speaker unit, flexible microphone arm with integrated charging port, and the control module. This image illustrates the primary components of the headset.

Opsætning og installation

The HF1.0 headset is designed for quick and easy installation within most standard helmets, requiring no special tools.

1. Forbered din hjelm: Identify a suitable flat surface inside your helmet's ear cavity for the speaker, and a location near your mouth for the microphone.
2. Tilslut højttaler: The speaker unit comes with a Velcro fixing system. Peel the adhesive backing from the Velcro pad (if not already attached to the speaker) and firmly press it onto the chosen spot inside your helmet. Then, attach the speaker to the Velcro pad.
3. Position Mikrofon: Route the flexible microphone arm so that the microphone is positioned close to your mouth, ideally within 1-2 cm, to ensure clear voice pickup and noise reduction.
4. Apply Foam Speaker Covers: Place the provided foam speaker covers over the speaker for comfort and improved audio quality.
5. Indledende opkrævning: Before first use, fully charge the headset. Connect the micro-USB cable (not included, but standard) to the micro-USB port integrated on the microphone. A full charge takes approximately 2 hours.

Betjeningsvejledning

The HF1.0 features a single multifunction button and voice control for ease of use while riding.

Tænd/sluk og parring

• Tænd: Press and hold the multifunction button until you hear an audible confirmation.
• Sluk: Press and hold the multifunction button until you hear an audible confirmation.
• Parring: When first powered on, the headset will automatically enter pairing mode. On your smartphone, enable Bluetooth and select "Twiins HF1.0" from the list of available devices. Once paired, the headset will automatically connect to your smartphone every time it is switched on.

Opkaldsstyring

• Besvar opkald: When a call comes in, you can answer by voice command (Voice Answering function) or by a short press of the multifunction button.
• Afslut opkald: Tryk kort på multifunktionsknappen.
• Afvis opkald: Press and hold the multifunction button.

Music and Navigation

• Once paired, audio from your smartphone, including music and navigation instructions, will be streamed to the HF1.0 headset.
• Use your smartphone to control music playback (play, pause, skip tracks) and navigation settings.

Intercom funktionalitet

• Rytter-til-passager intercom: When paired with another Twiins HF3 headset, the HF1.0 can function as a rider-to-passenger intercom with a range of up to 50 feet. Refer to the HF3 manual for specific pairing instructions for intercom use.
• Unlimited Intercom: When used in conjunction with a Twiins Smart-Button and the Twiins Intercom App, the HF1.0 can facilitate an unlimited intercom experience.

Opladning

• The HF1.0 has a battery life of approximately 6 hours of continuous use.
• To recharge, connect a micro-USB cable to the port located on the microphone unit. The headset can be charged without removing it from the helmet.
• En fuld opladning tager cirka 2 timer.

Tekniske specifikationer

Fejlfinding

If you encounter issues with your HF1.0 headset, try the following common troubleshooting steps:

• Ingen strøm: Sørg for, at headsettet er fuldt opladet. Tilslut det til en strømkilde, og lad det oplade i mindst 30 minutter, før du forsøger at tænde det igen.
• Kan ikke parres med telefon:
  • Sørg for, at Bluetooth er aktiveret på din smartphone.
  • Ensure the HF1.0 is in pairing mode (usually indicated by a flashing light or audible prompt upon first power-on).
  • Forget or remove previous pairings for the HF1.0 on your phone and try pairing again.
  • Restart both your phone and the headset.
• Dårlig lydkvalitet / Statisk:
  • Ensure the speaker is positioned correctly inside the helmet, directly over your ear.
  • Check that the foam speaker covers are properly installed.
  • Move closer to your paired smartphone to rule out range issues.
  • Ensure the microphone is positioned correctly near your mouth for optimal noise reduction.
• Stemmestyring reagerer ikke:
  • Verify the microphone is not obstructed and is positioned correctly.
  • Tal tydeligt og med normal lydstyrke.
  • Ensure your phone's voice assistant settings are correctly configured for Bluetooth devices.

Opretholdelse

Proper care will extend the life of your Twiins HF1.0 headset:

• Rensning: Use a soft, dry cloth to wipe down the headset components. Do not use harsh chemicals or abrasive cleaners. Avoid getting moisture into the charging port or speaker grilles.
• Opbevaring: When not in use for extended periods, store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
• Opladning: Always use a compatible micro-USB cable and a standard USB power adapter (5V/1A recommended) for charging. Avoid overcharging or completely draining the battery frequently to prolong its lifespan.
• Vandeksponering: The HF1.0 is not water resistant. Avoid exposure to rain, splashes, or submersion in water.

Garanti og support

For specific warranty information regarding your Twiins HF1.0 Dual Bluetooth headset, please refer to the documentation provided at the time of purchase or visit the official Twiins webGarantibetingelserne kan variere afhængigt af region og forhandler.

For technical support, troubleshooting beyond this manual, or service inquiries, please contact Twiins customer support through their official channels. Contact information can typically be found on the manufacturer's webwebstedet eller på produktemballagen.

Fabrikant: Tvillinger