Brugermanual

Indledning

Tak for købetasing the Auckly 15W Wireless Car Mount Charger. This device provides a convenient and efficient way to charge your compatible smartphone while driving, utilizing magnetic attachment and fast wireless charging technology. Please read this manual thoroughly before use to ensure proper installation and operation.

Pakkens indhold

• 1 x Auckly 15W Wireless Car Mount Charger (Model C90)
• 1 x Ventilationsklemme
• 1 x USB-C opladningskabel
• 1 x brugermanual
• Optional: MagSafe Ring (for non-MagSafe compatible phones)

Opsætningsinstruktioner

1. Attaching the Mount

The Auckly wireless car mount charger comes with an air vent clip for secure attachment to your vehicle's air conditioning vents.

1. Unscrew the nut on the back of the charger unit.
2. Place the nut over the ball joint of the air vent clip.
3. Insert the ball joint into the socket on the back of the charger unit.
4. Tighten the nut clockwise until the charger is securely fastened to the clip, allowing for angle adjustment.

Billede: Bagside view of the Auckly wireless car mount charger with the air vent clip securely attached, illustrating the ball joint and tightening nut mechanism.

2. Installing in Vehicle

Choose a suitable air vent in your car. Ensure the vent blades are horizontal and sturdy enough to support the charger and your phone.

1. Åbn clamp of the air vent clip by pressing the release button or spreading the jaws.
2. Carefully insert the clamp onto one of your car's air vent blades. Ensure it is firmly gripped.
3. Adjust the angle of the charger for optimal viewog tilgængelighed.

Image: A diagram illustrating the correct method for attaching the charger to a car's air vent, highlighting compatible and incompatible vent types.

3. Strømtilslutning

Connect the provided USB-C charging cable to the USB-C port on the bottom of the charger unit.

Plug the other end of the USB-C cable into a car charger adapter (not included) with a minimum output of 15W (e.g., a QC 3.0 or PD car charger) for optimal fast charging performance.

Image: The Auckly wireless car mount charger installed on an air vent, with the USB-C cable connected and ready for use.

Betjeningsvejledning

1. Placing Your Phone

Ensure your phone is compatible with MagSafe or has a MagSafe-compatible case/ring attached. The charger's strong N55 magnets will securely hold your device.

Simply bring your phone close to the charging surface. The magnetic alignment will automatically snap your phone into the correct position for wireless charging.

Image: A smartphone magnetically attached to the Auckly charger, demonstrating the secure hold and proper alignment for charging.

2. Trådløs opladning

Once your phone is correctly aligned, the charger will automatically begin wireless charging. A blue LED indicator light on the charger will illuminate to confirm charging is active.

The charger supports up to 15W fast wireless charging for compatible devices. Charging speed may vary based on your phone model, case, and car charger adapter.

Image: Visual representation of the 15W wireless fast charging capability, showing power transfer and charging efficiency.

3. Removing Your Phone

To remove your phone, simply pull it away from the magnetic surface. The strong magnetic hold ensures your phone remains secure during driving but allows for easy detachment when needed.

Opretholdelse

• Keep the charging surface clean and free of dust or debris. Use a soft, dry cloth to wipe the surface.
• Avoid exposing the charger to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
• Forsøg ikke selv at skille opladeren ad eller reparere den. Kontakt kundesupport, hvis der opstår problemer.
• Ensure the air vent clip remains securely fastened to prevent wobbling or detachment during driving.

Fejlfinding

Telefonen oplader ikke

• Tjek strømtilslutning: Ensure the USB-C cable is securely connected to both the charger and the car adapter, and the car adapter is properly plugged into the car's power outlet.
• Verify Car Adapter Output: Confirm your car charger adapter provides sufficient power (minimum 15W recommended, e.g., QC 3.0 or PD).
• Phone Alignment: Reposition your phone on the charger to ensure proper magnetic alignment. The blue LED indicator should light up.
• Telefoncover: If using a non-MagSafe case, it might be too thick or contain metal that interferes with wireless charging. Try removing the case or using a MagSafe-compatible case/ring.
• Enhedskompatibilitet: Ensure your phone supports Qi wireless charging.

Image: A visual guide to common charging problems and their respective solutions, such as checking power, phone alignment, and case compatibility.

Telefonen sidder ikke sikkert fast

• MagSafe-kompatibilitet: Ensure your phone or case is MagSafe compatible. For non-MagSafe phones, a magnetic ring must be properly attached to the phone or case.
• Charger Angle: Adjust the charger angle to ensure the phone's weight is balanced.
• Vent Stability: Ensure the air vent clip is firmly attached to a stable air vent blade.

Image: A comparison graphic highlighting the superior magnetic strength of the Auckly charger (1.73kg) compared to other products, ensuring a secure hold.

Overophedning

• Miljøfaktorer: Avoid placing the charger in direct sunlight or near heat sources (e.g., car heater vents) during charging, as this can cause overheating.
• Telefoncover: Some thick cases can trap heat. Try removing the case during charging if overheating occurs.
• Baggrundsapps: Close unnecessary background applications on your phone that might cause it to heat up during charging.

Produktspecifikationer

Garanti og support

Auckly products come with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact Auckly customer service through the contact information provided on the product packaging or the official Auckly webwebsted.

Note: The manufacturer offers a 60-month replacement service for this product, as indicated by customer reviews.