FERMAX Duox Plus Digital City Video Panel Prox

Indledning

This manual provides comprehensive instructions for the installation, operation, and maintenance of your FERMAX Duox Plus Digital City Video Panel Prox. Please read this manual carefully before using the device to ensure proper functionality and safety.

Figure 1: FERMAX Duox Plus Digital City Video Panel Prox

The image displays the front of the FERMAX Duox Plus Digital City Video Panel Prox. It features a top-mounted camera and speaker, a central color display screen, a numeric keypad with additional 'A' and 'B' buttons, and a lower section dedicated to proximity access control, indicated by an icon of a hand swiping a card.

The FERMAX Duox Plus Digital City Video Panel Prox is an advanced outdoor video entry panel designed for multi-apartment buildings and residential complexes. It integrates video intercom, digital keypad for code entry, and proximity access control for enhanced security and convenience.

Opsætning og installation

Proper installation is crucial for the optimal performance of the Duox Plus panel. It is recommended that installation be performed by a qualified technician.

1. Montering af panelet

• Ensure the mounting surface is flat and secure. The panel is designed for wall mounting.
• Use the provided mounting template to mark drilling points.
• Bor huller og isæt vægankre om nødvendigt.
• Secure the mounting frame to the wall using appropriate screws.
• Carefully attach the panel to the mounting frame, ensuring all connections are accessible.

2. Ledningsforbindelser

The Duox Plus system uses a 2-wire non-polarized digital bus. Refer to the system wiring diagram for specific connections to the power supply, indoor monitors, and other system components.

• Strømforsyning: Connect the Duox Plus power supply to the designated terminals. Ensure correct voltage og polaritet.
• Bus Line: Connect the 2-wire Duox bus line to the panel's bus terminals. This line carries both power and data.
• Døråbner: Connect the electric strike or door lock mechanism to the panel's relay outputs.
• Hjælpeindgange/udgange: Connect any additional devices such as exit buttons or external sensors as per system requirements.

3. Indledende konfiguration

After physical installation and wiring, the panel requires initial configuration. This typically involves setting up apartment numbers, access codes, and proximity card registration.

• Access the panel's programming menu using the master code.
• Follow the on-screen prompts to assign apartment numbers to specific indoor units.
• Register proximity cards or key fobs by presenting them to the proximity reader when prompted.
• Set up individual access codes for residents as needed.

Betjeningsvejledning

1. Foretagelse af et opkald

1. Enter the apartment number using the numeric keypad.
2. Tryk på Ring button (often indicated by a bell or phone icon).
3. The panel will establish a video and audio connection with the indoor monitor.
4. Wait for the resident to answer.

2. Using the Keypad for Access

1. Enter your personal access code using the numeric keypad.
2. Tryk på Indtast or # button (if applicable).
3. If the code is correct, the door will unlock for a set period.

3. Proximity Access Control

1. Present your registered proximity card or key fob to the designated proximity reader area on the panel.
2. A confirmation sound or visual indicator will confirm successful reading.
3. If the card is valid, the door will unlock.

4. Display Screen Information

The integrated display screen provides various information:

• Velkomstbesked: Displays a customizable welcome message when idle.
• Opkaldsstatus: Shows the status of a call (e.g., "Calling...", "Connected", "Busy").
• Instruktioner: Provides prompts for entering apartment numbers or access codes.
• Fejlmeddelelser: Displays error codes or messages if an issue occurs.

Opretholdelse

Regular maintenance ensures the longevity and reliable operation of your FERMAX Duox Plus panel.

1. Rensning

• Brug en blød, damp cloth to clean the panel's surface.
• Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
• For the camera lens and display screen, use a microfiber cloth specifically designed for optics.
• Ensure no liquid enters the speaker grille or keypad gaps.

2. Firmwareopdateringer

Periodically check the FERMAX official website or consult your installer for available firmware updates. Updates can improve performance, add new features, or address security vulnerabilities.

3. Systemtjek

• Regularly test the call function to indoor units.
• Verify that access codes and proximity cards are functioning correctly.
• Inspect the panel for any signs of physical damage or tampering.

Fejlfinding

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact FERMAX technical support or your authorized installer.

Specifikationer

Garanti og support

Garantioplysninger

FERMAX products typically come with a manufacturer's warranty covering defects in materials and workmanship. The specific warranty period and terms may vary by region and product. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the documentation included with your product or visit the official FERMAX webwebsted.

Teknisk support

For technical assistance, installation queries, or troubleshooting beyond the scope of this manual, please contact FERMAX technical support. You can find contact details on the official FERMAX webwebstedet eller gennem din autoriserede distributør.

Online ressourcer: www.fermax.com