THIRDREALITY Zigbee 3.0 USBC-Dongle Brugermanual

Indledning

The THIRDREALITY Zigbee 3.0 USBC-Dongle is a versatile USB stick designed to facilitate smart home automation by providing Zigbee connectivity. It is compatible with popular platforms such as Zigbee2Mqtt (Z2M) and Zigbee Home Automation (ZHA), allowing seamless integration with a wide range of Zigbee 3.0 end devices including smart switches, blinds, and sensors. This manual provides detailed instructions for setting up, operating, and maintaining your Zigbee USBC-Dongle.

THIRDREALITY Zigbee 3.0 USBC-Dongle and USB-A adapter

Image: The THIRDREALITY Zigbee 3.0 USBC-Dongle shown with its included USB-A adapter, highlighting its compact design and dual compatibility.

Hvad er der i æsken

Kontroller venligst pakkens indhold for at sikre, at alle varer er til stede:

Zigbee 3.0 USBC-DONGLE x 1
Manual x 1 (Dette dokument)
USBA Adaptor x 1
Pin x 1

Contents of the THIRDREALITY Zigbee 3.0 USBC-Dongle package

Image: A visual representation of the package contents, including the Zigbee USBC-Dongle, USB-A adapter, quick start guide, and a pin.

Produkt overview

The Zigbee USBC-Dongle features a compact design with essential components for reliable Zigbee communication.

Internal hardware components of the Zigbee USBC-Dongle

Billede: En intern view of the Zigbee USBC-Dongle's PCB, showing key components such as the Boot and Reset button, RGB LED, PCB Antenna, Type-C Connector, and Type-C to Type-A Convertor.

Boot and Reset button: Used for device reset and firmware burning.
RGB LED: Indicates device status and activity.
PCB-antenne: Integrated antenna for Zigbee signal transmission and reception.
Type-C stik: Primary USB-C interface for connection.
Type-C to Type-A Convertor: Allows connection to standard USB-A ports.

Specifikationer

Detailed technical specifications for the THIRDREALITY Zigbee 3.0 USBC-Dongle:

Technical specifications of the Zigbee USBC-Dongle

Image: A graphic detailing the specifications of the Zigbee USBC-Dongle, including dimensions and key technical data.

Attribut	Værdi
Mærke	TREDJEREALITET
Model nr.	3RZD02032Z
Produktdimensioner	60 x 20 x 9 mm (2.36 x 0.79 x 0.35 tommer)
Varens vægt	1.13 ounce (0.03 kilo)
Materiale	Plastics, PCBA
Magt	300 mW
Arbejdstemperatur	0°C – 40°C
RF-frekvens	2405 – 2480 MHz
Trådløs protokol	Zigbee 3.0
Hardware-interface	USB 2.0
Farve	Hvid
UPC	850001595735

Nøglefunktioner

Diagram illustrating key features of the Zigbee USBC-Dongle

Image: A graphic highlighting the main features of the Zigbee USBC-Dongle, including port support, compatibility, range, and installation simplicity.

Platform kompatibilitet: Designed to be compatible with Zigbee2Mqtt (Z2M) and Home Assistant (Zigbee Home Automation).
Zigbee 3.0-kompatibilitet: Supports standard Zigbee 3.0 end devices from various brands, including smart switches, smart blinds, and smart sensors.
Installation Simplicity: Plug-and-play functionality for easy setup. Simply insert the dongle into a compatible USB port.
Dual USB Support: Includes support for both USB-A and USB-C connections, enhancing compatibility across various devices.
Understøttelse af firmwareopgradering: Supports burning of equipment and factory reset (refer to advanced sections for details).
Stable Range: Offers a communication distance of up to 30 meters.

Opsætning og installation

The THIRDREALITY Zigbee USBC-Dongle is designed for straightforward installation. Follow these steps to get started:

Connect the Dongle:
Insert the Zigbee USBC-Dongle directly into a USB-C port on your computer or Raspberry Pi. If your device only has USB-A ports, use the included USB-A adapter.
Video: Demonstrates connecting the THIRDREALITY Zigbee USBC-Dongle to a computer and a Raspberry Pi, showing the blue indicator light upon successful connection.
Software Configuration (Home Assistant):
The dongle is primarily used with Home Assistant for smart home integration. Depending on your setup, you will configure it for either Zigbee Home Automation (ZHA) or Zigbee2Mqtt (Z2M).
For ZHA (Zigbee Home Automation):
- Naviger til Indstillinger > Devices & Services in Home Assistant.
- Look for the discovered "Radio Browser" or "Zigbee Home Automation" integration.
- Configure the integration by selecting the correct serial device path for your dongle (e.g., /dev/ttyUSB0).
- Følg anvisningerne på skærmen for at fuldføre opsætningen.
For Z2M (Zigbee2MQTT):
- Ensure the Zigbee2MQTT add-on is installed and running in Home Assistant.
- Access the Zigbee2MQTT add-on configuration.
- Locate the 'serial' section in the configuration and specify the correct port for your dongle (e.g., port: /dev/ttyUSB0).
- Save the configuration and restart the Zigbee2MQTT add-on.

Home automation setup diagram with Zigbee USBC-Dongle

Image: An illustrative diagram showing how the Zigbee USBC-Dongle acts as a central hub in a smart home chain, connecting various Zigbee devices like smart buttons, sensors, switches, plugs, lights, and blinds. Note: A Home Assistant System is required for this setup.

Betjeningsvejledning

Once successfully configured with your chosen smart home platform (ZHA or Z2M), the Zigbee USBC-Dongle operates as the coordinator for your Zigbee network. It enables communication between your smart home hub and all paired Zigbee end devices.

Enhedsparring: Refer to your smart home platform's documentation (Home Assistant, Zigbee2Mqtt) for specific instructions on how to pair new Zigbee devices with the dongle. Typically, this involves enabling pairing mode on the dongle via the software interface and then activating pairing mode on the Zigbee end device.
Netværksstyring: Your smart home platform will provide tools to manage your Zigbee network, including viewing connected devices, checking signal strength, and performing network repairs if needed.
Automatisering: Utilize your smart home platform's automation features to create routines and scenes involving your Zigbee devices.

Opretholdelse

The THIRDREALITY Zigbee USBC-Dongle requires minimal maintenance to ensure optimal performance:

Hold rent: Wipe the dongle with a dry, soft cloth to remove dust. Avoid using liquid cleaners.
Miljøforhold: Operate the dongle within its specified temperature range (0°C – 40°C) and avoid excessively humid environments.
Firmwareopdateringer: Periodically check the THIRDREALITY website or your smart home platform's community forums for any available firmware updates for the dongle. Updates can improve performance, add features, or address bugs.

Fejlfinding

If you encounter issues with your Zigbee USBC-Dongle, try the following troubleshooting steps:

Problem	Mulig løsning
Dongle not recognized by computer/Raspberry Pi.	Prøv en anden USB-port. Ensure the USB-A adapter (if used) is securely connected. Restart your computer/Raspberry Pi. Check device manager (Windows) or `ls /dev/tty*` (Linux) to see if a new serial device appears.
Zigbee devices not pairing.	Ensure the dongle is in pairing mode within your smart home software. Bring the Zigbee device closer to the dongle during pairing. Check the Zigbee device's battery (if applicable). Perform a factory reset on the Zigbee device (refer to the device's manual). Verify the dongle's firmware is up to date.
Poor Zigbee signal or dropped devices.	Use a USB extension cable to move the dongle away from the computer/Raspberry Pi to reduce interference. Ensure there are enough Zigbee router devices (e.g., smart plugs, always-on lights) to create a strong mesh network. Avoid placing the dongle near Wi-Fi routers or other 2.4GHz wireless devices.
Dongle LED not lighting up.	Ensure the dongle is fully inserted into the USB port. Prøv en anden USB-port eller strømkilde. If using the USB-A adapter, ensure it is correctly connected.

Garanti og support

For warranty information and technical support, please refer to the official THIRDREALITY website or contact their customer service directly. You can also find additional resources and community support through the Home Assistant and Zigbee2Mqtt forums.

A PDF version of the user guide may also be available for download:

Download brugervejledning (PDF)

For direct assistance, please contact Third Reality, Inc., the seller of this product.

	THIRDREALITY Zigbee Smart Plug Gen2 Brugermanual Comprehensive user manual for the THIRDREALITY Zigbee Smart Plug Gen2 (Model 3RSP02028BZ). This guide covers product specifications, features like real-time energy monitoring, setup instructions, detailed pairing procedures with various smart home hubs including Amazon Echo, SmartThings, Hubitat, Home Assistant (ZHA/Zigbee2MQTT), and Third Reality's own hub. It also includes information on firmware upgrades via OTA, mesh network setup, troubleshooting common issues, and FCC regulatory conformance. The smart plug supports Zigbee 3.0 connectivity and is designed for smart home automation.
	THIRDREALITY Zigbee Smart Plug Gen2 Brugermanual Brugermanual til THIRDREALITY Zigbee Smart Plug Gen2, der dækker specifikationer, funktioner, opsætning, parring med forskellige smart home-systemer (Amazon Echo, SmartThings, Hubitat, Home Assistant), firmwareopdateringer, fejlfinding og lovgivningsmæssige oplysninger.
	THIRDREALITY ZigBee Smart Plug Gen2 Brugermanual Comprehensive user manual for the THIRDREALITY ZigBee Smart Plug Gen2. This guide covers product specifications, features, detailed setup and pairing instructions for various smart home ecosystems including Amazon Echo, SmartThings, Hubitat, and Home Assistant (ZHA/ZigBee2MQTT). It also includes information on mesh network setup, usage guidelines, troubleshooting common issues, FCC regulatory conformance, and limited warranty details.
	Brugermanual til smart jordfugtighedssensor - ThirdReality 3RSM0147Z Omfattende brugermanual til ThirdReality Smart Soil Moisture Sensor (model 3RSM0147Z). Lær om opsætning, installation, specifikationer, LED-status og parring med forskellige smart home-platforme som ThirdReality, SmartThings, Hubitat, Home Assistant og Zigbee2MQTT. Indeholder FCC-overholdelse og garantioplysninger.
	ThirdReality Temperatur- og Fugtighedssensor Lite: Hurtigstartguide og opsætning Kom i gang med din ThirdReality Temperature and Humidity Sensor Lite. Denne vejledning dækker opsætning, parring med smart home-hubs som Amazon Alexa, SmartThings, Hubitat og Home Assistant, samt tekniske specifikationer og lovgivningsmæssige oplysninger.
	THIRDREALITY Zigbee Smart Plug Gen2 brugermanual og opsætningsvejledning Omfattende brugermanual og opsætningsvejledning til THIRDREALITY Zigbee Smart Plug Gen2, der dækker specifikationer, funktioner, parringsinstruktioner med forskellige hubs (SmartThings, Echo, Hubitat, HA), firmwareopdateringer og fejlfinding.

THIRDREALITY 3RZD02032Z