1. Introduktion
The Wipcool C30s is a versatile steam cleaning machine designed for comprehensive cleaning and disinfection of air conditioning units, suitable for commercial and home use. It integrates multiple functions including hot steam, hot water, cold water, and ozone treatment to ensure thorough cleaning and sterilization.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Wipcool C30s Steam Cleaning Machine. Please read it carefully before use and retain it for future reference.
2. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af maskinen:
- Elektrisk sikkerhed: Ensure the power supply matches the machine's voltage (230V AC). Do not operate with damaged cords or plugs. Keep electrical connections dry.
- Hot Surfaces and Steam: The machine produces high-temperature steam (up to 150℃) and hot water (60-85℃). Avoid direct contact with steam, hot water, or hot surfaces to prevent burns. Use protective gloves.
- Vandforbrug: Use only clean water. Do not add detergents, chemicals, or corrosive substances to the water tank unless specifically instructed by the manufacturer.
- Ventilation: Ensure adequate ventilation when using the ozone treatment mode. Do not inhale ozone directly.
- Børn og kæledyr: Keep the machine out of reach of children and pets. Do not allow them to operate or play near the machine.
- Opbevaring: Opbevar maskinen et tørt, køligt sted, væk fra direkte sollys og ekstreme temperaturer.
- Opretholdelse: Afbryd strømmen, før du udfører vedligeholdelse eller rengøring.
3. Produktet er slutview og komponenter
Familiarize yourself with the main parts of your Wipcool C30s Steam Cleaning Machine:
Figur 3.1: Forside view of the Wipcool C30s Steam Cleaning Machine, showcasing dens kompakte design og integrerede håndtag.
Figur 3.2: Side view illustrating key features such as the intelligent spray gun, integrated design, ozone disinfection, reel structure, and LCD touch screen.
- Hovedenhed: Houses the water tank, heating elements, pump, and control system.
- LCD-berøringsskærm: Displays operating mode, temperature, pressure, and provides voice messages.
- Intelligent Spray Gun: Equipped with controls for various modes and interchangeable tips.
- Water Inlet Hose (2M): For connecting to a water source.
- Water Outlet Hose (4M): For delivering steam/water to the cleaning area.
- Dyse: Included component for focused cleaning.
- Reel Structure: For convenient hose management.
4. Opsætning
- Udpakning: Tag forsigtigt maskinen og alt tilbehør ud af emballagen. Gem emballagen til senere opbevaring eller transport.
- Placering: Placer maskinen på en stabil, plan overflade i et godt ventileret område.
- Vandtilslutning: Connect the 2-meter water inlet hose to a clean water source. Ensure connections are secure to prevent leaks.
- Slangeforbindelse: Connect the 4-meter water outlet hose to the designated port on the main unit and the intelligent spray gun.
- Strømtilslutning: Sæt netledningen i en jordet 230V AC stikkontakt.
- Indledende udfyldning: Ensure the water tank is filled with clean water before turning on the machine. The tank volume is 3 liters.
5. Betjeningsvejledning
The Wipcool C30s offers four distinct operating modes for comprehensive cleaning:
Figure 5.1: The Wipcool C30s in action, demonstrating its effectiveness in cleaning an indoor air conditioning unit.
Figure 5.2: Detail of the intelligent spray gun, showing the intuitive control buttons for operation.
Generel drift:
- Tænd: Press the power button on the main unit or LCD screen. The machine will initiate self-check and display current status.
- Valg af tilstand: Use the LCD touch screen to select the desired cleaning mode. Voice messages will confirm your selection.
- Pre-heating/Preparation: Allow the machine to reach the optimal temperature/pressure for the selected mode. The LCD screen will indicate readiness.
- Operation: Point the spray gun nozzle at the area to be cleaned. Press the trigger on the spray gun to begin the cleaning process.
- Sluk: After use, release the trigger, then press the power button to turn off the machine. Disconnect from power supply.
Specifikke tilstande:
- Hot Steam Mode: Ideal for deep cleaning and disinfection without chemicals. Steam temperature reaches 130-150℃. Use for evaporator coils and hard-to-reach areas.
- Varmtvandstilstand: Heats water to 60-85℃ with an operating pressure of 3-6 bar. Suitable for rinsing and cleaning surfaces where high-pressure steam might be too intense.
- Cold Water Mode: Provides a stream of cold water for general rinsing and pre-cleaning.
- Ozone Treatment Mode: Activates ozone generation to kill 99.9% of microorganisms and eliminate odors. Use this mode after cleaning for complete disinfection. Ensure the area is well-ventilated during and after ozone treatment.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your Wipcool C30s:
- Tøm vandtank: After each use, drain any remaining water from the tank to prevent mineral buildup and bacterial growth.
- Clean Nozzles and Hoses: Periodically check nozzles and hoses for blockages or debris. Rinse with clean water.
- Udvendig rengøring: Tør maskinens ydre af med adamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Afkalkning (hvis nødvendigt): If you notice reduced steam output or mineral buildup, consult a qualified technician for descaling procedures.
- Opbevaring: Store the machine in a dry, protected environment. Ensure hoses are properly coiled using the reel structure.
7. Fejlfinding
Se tabellen nedenfor for almindelige problemer og løsninger på disse:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Maskinen tænder ikke | Ingen strømforsyning; Netledningen er beskadiget | Check power connection; Inspect power cord for damage. |
| No steam/water output | Water tank empty; Nozzle/hose blocked; Machine not pre-heated | Fill water tank; Clear blockages; Allow machine to pre-heat. |
| Low pressure/weak output | Insufficient water; Partial blockage; Pump issue | Ensure adequate water supply; Check for partial blockages; Contact support if pump issue suspected. |
| Lækage fra forbindelser | Loose hose connections; Damaged seals | Tighten all hose connections; Inspect and replace damaged seals. |
| Ozone mode not working | Mode not selected correctly; Malfunction | Ensure ozone mode is activated on LCD; Contact support if issue persists. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, bedes du kontakte kundesupport.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | C30S |
| Mærke | Wipcool |
| Speciel funktion | Transportabel |
| Strømkilde | Elektrisk med ledning |
| Voltage | 230 volt (AC) |
| Tankvolumen / -kapacitet | 3 liter |
| Maximum Steam Temperature | 130-150 ℃ |
| Varmtvandstemperatur | 60-85 ℃ |
| Working Pressure (Hot Water) | 3-6 bar |
| Indløbsslange Længde | 2 meter |
| Udløbsslange Længde | 4 meter |
| Inkluderede komponenter | Dyse |
| Farve | Grøn |
| Formfaktor | Stå Alene |
9. Garantioplysninger
The Wipcool C30s Steam Cleaning Machine comes with a 1 års begrænset garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, unauthorized modification, or failure to follow the instructions in this manual.
Gem venligst dit købsbevis for garantikrav.
10. Kundesupport
For technical assistance, warranty claims, or any questions regarding your Wipcool C30s Steam Cleaning Machine, please contact your retailer or the manufacturer's customer service department.
Please have your model number (C30S) and purchase information ready when contacting support.
