Behringer Xenyx X1003B Premium Analog Mixer Brugermanual

1. Introduktion

The Behringer Xenyx X1003B is a compact and comprehensive 10-channel analog mixer designed for various audio applications, including podcasting, streaming, and home studio use. It features five phantom-power-enabled XLR inputs with XENYX preamps and a dedicated stereo line input channel with streaming outputs. This mixer offers versatile power options, including 9-volt battery operation for portable use.

Figur 1: Forside view of the Behringer Xenyx X1003B Premium Analog Mixer, showcasing its input section, channel strips with gain, EQ, and fader controls, and master section.

2. Opsætning

2.1 Tilslutning af mixeren

The Xenyx X1003B mixer can be powered via a standard 110V AC wall outlet or through 9-volt batteries for portable operation.

2.1.1 AC strømtilslutning

Connect the provided power adapter to the mixer's power input and then to a suitable AC power outlet. Ensure the power supply matches the voltagkravene i din region.

2.1.2 Batteriinstallation

For battery operation, the mixer requires three 9-volt batteries. Access the battery compartment, typically located on the underside of the unit. You may need a small Phillips head screwdriver to open the compartment. Insert the batteries, ensuring correct polarity, and secure the cover. Two of the 9-volt batteries provide the main power, while the third is stepped up to enable 48V phantom power.

Figure 2: Underside of the mixer, indicating the battery compartment for 9-volt battery installation.

2.2 Indgangsforbindelser

The X1003B offers various input options:

• XLR Inputs (Mic 1-8): Connect microphones using XLR cables. These inputs feature XENYX preamps and can supply 48V phantom power for condenser microphones.
• Linjeindgange (6,3 mm TRS): Connect line-level instruments or devices. Channels 1-2 have dedicated line inputs, while channels 3/4, 5/6, and 7/8 share inputs with the XLR channels.
• Stereo Line Input (IN 9/10 - RCA): A dedicated stereo RCA input for connecting devices like media players or streaming sources.

3. Betjening af mixeren

3.1 Kanalkontrol

Each channel strip provides controls for adjusting the audio signal:

• GEVINST: Justerer indgangsfølsomheden for mikrofoner eller linjeniveausignaler.
• EQ (høj, mellem, lav): Three-band equalizer for tone shaping. Adjust these knobs to boost or cut frequencies in the high, mid, and low ranges.
• MAN SEND: Controls the level of the signal sent to the monitor output.
• FX SEND: Controls the level of the signal sent to the effects processor (if connected).
• PAN/BAL: Adjusts the stereo position (pan for mono channels, balance for stereo channels).
• Kanal fader: Styrer det samlede udgangsniveau for den enkelte kanal.

3.2 Hovedsektion

The master section provides overall control and output options:

• HOVEDUDGANG (6,3 mm TRS): Main stereo output for connecting to power ampløftere eller elektriske højttalere.
• HOLEFONER (6,3 mm TRS): Headphone output with a dedicated level control.
• REC/STREAM UD (RCA): Stereo RCA outputs for recording or streaming your mix.
• PHANTOM strømafbryder: Activates 48V phantom power for condenser microphones connected to the XLR inputs. The LED indicator will illuminate when active.
• Niveaumålere: LED indicators display the output level of the main mix, helping to prevent clipping.

4. Vedligeholdelse

To ensure the longevity and optimal performance of your Behringer Xenyx X1003B mixer, follow these general maintenance guidelines:

• Rensning: Regularly wipe the mixer's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or controls.
• Ventilation: Ensure proper airflow around the unit to prevent overheating. Do not block ventilation openings.
• Opbevaring: When not in use, store the mixer in a cool, dry place away from direct sunlight, extreme temperatures, and excessive dust or moisture.
• Kabelstyring: Use proper cable management to prevent strain on connectors and accidental disconnections.
• Batteripleje: If using batteries, remove them if the mixer will not be used for an extended period to prevent leakage and damage.

5. Fejlfinding

If you encounter issues with your Xenyx X1003B mixer, consider the following common troubleshooting steps:

• Ingen strøm: Check the power adapter connection and the power outlet. If using batteries, ensure they are correctly installed and have sufficient charge.
• Ingen lyd: Verify all cable connections (inputs, outputs, speakers). Check channel faders, master fader, and gain controls are set appropriately. Ensure phantom power is enabled for condenser microphones.
• Forvrænget lyd: Reduce input gain or channel fader levels to prevent clipping (indicated by the CLIP LED). Check for impedance mismatches with connected devices.
• Brummen eller støj: Ensure all cables are properly shielded and connected. Check for ground loops and try using balanced cables where possible. Keep audio cables away from power cables.
• Intermitterende lyd: Inspect cables and connectors for damage. Ensure all connections are secure.

If the issue persists after these steps, consult a qualified technician or contact Behringer support.

6. Specifikationer

7. Garanti og support

For detaljerede garantioplysninger og teknisk support henvises til den officielle Behringer-brochure. website or the documentation included with your product. Specific warranty terms may vary by region and retailer.