1. Introduktion
Thank you for choosing the Pelsee Dash Cam Hardwire Kit. This kit provides a reliable and continuous power supply to your dash camera directly from your vehicle's fuse box, enabling essential features like 24-hour parking monitoring and low voltage protection. This manual will guide you through the installation, operation, and maintenance of your hardwire kit to ensure optimal performance and safety.
2. Produktet er slutview
2.1 Pakkens indhold
- 1 x Type-C Hardwire Kit (with integrated control box)
- 4 x Fuse Tap Cables (compatible with various fuse types: ACZ MICRO2, ACS MINI, ACN LP MINI, ACU ATO)
- 1 x Montering af koben
Image 2.1: Complete Pelsee Dash Cam Hardwire Kit components.
Billede 2.2: Detaljeret view of the included fuse tap sets for different fuse types.
2.2 Nøglefunktioner
- Upgraded ACC Power Indicator: Provides visual confirmation of correct connection, simplifying the installation process.
- Bred kompatibilitet: Designed for Type-C dash cams, providing a stable 5V/2A output. Supports 12V to 24V input, making it compatible with most car models.
- 24-timers parkeringsovervågning: Continuously supplies power to your dash camera even when the vehicle is parked, protecting against incidents like hit-and-runs.
- Smart lavvolumentage Beskyttelse: Automatically cuts off power to the dash cam when the car battery voltage drops to 11.6V (for 12V systems) or 22.8V (for 24V systems), preventing battery drain.
Image 2.3: Internal circuit board demonstrating the low voltage-beskyttelsesmekanisme.
Image 2.4: Diagram illustrating the 24-hour continuous power supply feature.
3. Opsætning og installation
Proper installation is crucial for the hardwire kit's functionality. Follow these steps carefully:
3.1 Identify Fuse Box Location
Locate your vehicle's fuse box. This is typically found under the dashboard, in the glove compartment, or under the hood. Consult your vehicle's owner's manual for the exact location.
3.2-leder forbindelsesdiagram
Image 3.1: Wiring diagram for the Pelsee Hardwire Kit.
- Sort ledning: Connect to a metal ground bolt or screw on the vehicle's chassis.
- Gul ledning: Connect to a constant power supply fuse slot (always on, even when the engine is off). This is for parking monitoring.
- Rød ledning: Connect to an ACC fuse slot (Accessory power, turns on/off with the engine key). This is for normal recording while driving.
3.3 Steps for Installation
- Secure Ground Connection: Locate a suitable metal ground point near the fuse box. Use the provided installing crowbar to help route the black wire and secure it to the ground point. Ensure a tight connection.
- Identificér sikringspladser: Using a multimeter (not included) or by consulting your vehicle's fuse diagram, identify a constant power fuse slot and an ACC power fuse slot in your vehicle's fuse box.
- Select and Install Fuse Taps: Choose the appropriate fuse tap cable from the provided set that matches the size of your vehicle's original fuses. Insert the original fuse into the bottom slot of the fuse tap, and a new fuse (not included, typically 5A or 10A for dash cams) into the top slot of the fuse tap. Connect the yellow wire to the constant power fuse tap and the red wire to the ACC power fuse tap. Insert the fuse taps into their respective fuse slots.
- Opret forbindelse til Dash Cam: Route the Type-C cable from the hardwire kit to your dash camera and plug it into the Type-C port.
- Test forbindelse: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle to verify the parking monitor function activates (if your dash cam supports it). The ACC power indicator on the hardwire kit will help confirm correct connections.
- Kabelstyring: Use the installing crowbar to neatly tuck away the cables along the vehicle's trim and headliner for a clean and hidden installation.
Billede 3.2: Eks.ample of a secure ground wire connection.
Billede 3.3: Overview of the installation process within a car's interior.
Image 3.4: Close-up of a fuse box, indicating a constant power fuse slot.
Image 3.5: Close-up of a fuse box, indicating an ACC power fuse slot.
4. Betjening
Once installed, the Pelsee Dash Cam Hardwire Kit operates automatically:
- Kørselstilstand: When your vehicle's ignition is on, the hardwire kit provides continuous power to your dash cam via the ACC connection, allowing for normal recording.
- Parkeringstilstand: When your vehicle's ignition is turned off, the hardwire kit switches to drawing power from the constant power supply, enabling your dash cam's parking monitoring features (if supported by your dash cam). This ensures continuous surveillance even when the vehicle is off.
- Lav voltage Beskyttelse: Den indbyggede smarte lavvolumentage protection system continuously monitors your car battery's voltage. Hvis voltage drops below the preset threshold (11.6V for 12V systems or 22.8V for 24V systems), the hardwire kit will automatically cut off power to the dash cam to prevent excessive battery drain and ensure your vehicle can start.
Image 4.1: Visual representation of 24-hour parking monitoring protection.
5. Vedligeholdelse
The Pelsee Dash Cam Hardwire Kit requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Periodically check all connections (ground, fuse taps, Type-C cable) to ensure they remain secure and free from corrosion.
- Inspect the fuse taps and fuses for any signs of damage or blowing. Replace blown fuses with new ones of the correct ampslette.
- Keep the control box free from excessive dust or moisture.
6. Fejlfinding
Hvis du støder på problemer med dit fastmonterede kabelsæt, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Dashcam'et tænder ikke. | Loose connection, blown fuse, incorrect fuse slot. | Check all wire connections. Inspect fuses in the fuse taps and replace if blown. Ensure red wire is connected to an ACC fuse slot and yellow wire to a constant power slot. |
| Parking monitor does not work. | Yellow wire not connected to constant power, dash cam setting. | Verify the yellow wire is connected to a fuse slot that is always live. Check your dash cam's settings to ensure parking mode is enabled. |
| Bilbatteriet aflades hurtigt. | Lav voltage protection not functioning, excessive parking mode duration. | Ensure the hardwire kit is correctly installed and the low voltage protection is active. If your dash cam allows, adjust parking mode duration or sensitivity to reduce power consumption. |
| ACC indicator light is off. | No power to ACC wire, faulty connection. | Check the red wire connection and the fuse in its tap. Ensure the vehicle's ignition is on. |
7. Specifikationer
- Modelnavn: Pelsee Hardwire Kit V66
- Input bindtage: DC 12V-24V
- Udgang Voltage/aktuel: DC 5V/2A
- Lav voltage Cut-off (12V system): 11.6V
- Lav voltage Cut-off (24V system): 22.8V
- Connector Type: Type-C
- Produktdimensioner: Approximately 1.97 x 1.97 x 1.97 inches (Control Box)
- Varens vægt: Cirka 6.3 ounce
8. Garanti og support
Pelsee stands behind the quality of its products. Your Pelsee Dash Cam Hardwire Kit comes with the following:
- 18-måneders garanti: Enjoy peace of mind with an 18-month warranty from the date of purchase.
- 30 dages gratis returret: If you are not satisfied, you may return the product within 30 days for a free return.
- 30-dages pengene-tilbage-garanti: A full refund is available within 30 days of purchase if the product does not meet your expectations.
For technical assistance, warranty claims, or any other inquiries, please contact our support team:
E-mail: support@pelsee.com
