Indledning
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Twin Size Metal Platform Bed Frame. Please read all instructions carefully before assembly and use to ensure proper setup and safe operation. Keep this manual for future reference.
Image: The Yaheetech Twin Size Metal Platform Bed Frame, featuring a diamond pattern headboard and footboard, in a bedroom setting.
Sikkerhedsoplysninger
- Overskrid ikke den anbefalede maksimale vægt på 450 pund.
- Vær forsigtig med skarpe kanter under montering.
- Securely store items in under-bed storage to prevent shifting.
- Ensure non-slip foot caps are properly secured to prevent slipping.
- Always follow assembly instructions precisely to ensure structural integrity.
- Kontrollér regelmæssigt alle bolte og forbindelser for at sikre, at de forbliver stramme.
Pakkens indhold
Før monteringen påbegyndes, skal du kontrollere, at alle komponenter er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.
- Paneler til hovedgærde og fodgærde
- Sideskinner
- Stållameller
- Støtteben
- Hardwarepakke (bolte, skiver, møtrikker, unbrakonøgle)
- Assembly Instructions Sheet
Monteringsvejledning
Assembly is designed to be intuitive and efficient. It is recommended to have two people for assembly. Please follow these steps:
- Udpak og identificer dele: Lay out all components on a soft, clean surface to prevent scratches. Refer to the parts list to ensure everything is accounted for.
- Fastgør sidehejs til hovedgærde og fodgærde: Align the side rails with the designated connection points on the headboard and footboard. Secure them using the provided bolts and the Allen wrench. Do not fully tighten bolts until all connections are made.
- Installer midterste støtteben: Attach any center support legs to the main frame as indicated in the diagrams.
- Indsæt stållameller: The bed frame features a 12-slat support system. Carefully insert each metal slat into the designated notches on the side rails. Ensure each slat is firmly seated.
Image: Illustration showing how to align the metal pipe with the notch during assembly.
Image: Illustration demonstrating to press firmly to secure the connection point.
- Secure Slats with L-shaped Plates: For enhanced stability, fasten the L-shaped plates to secure the slats, as shown in the diagram.
Billede: Nærbillede view of L-shaped plates being fastened to secure the bed slats, enhancing stability.
- Spænd alle bolte: Once all components are in place, go back and securely tighten all bolts. Do not overtighten.
- Placemadras: Position your twin-size mattress directly onto the installed slats. No box spring is required.
For a visual guide to assembly, please refer to the official product video:
Video: Official Yaheetech assembly guide for the Vintage Twin Size Metal Bed Frame. This video demonstrates the step-by-step process of putting together the bed frame, highlighting key connection points and ensuring proper setup.
Betjeningsvejledning
- Madrasplacering: Place your twin-size mattress directly on the steel slats. The 12-slat support system eliminates the need for a box spring. The slats are spaced approximately 5.3-5.5 inches apart.
- Madrassikkerhed: The side rails are designed to be higher than the inserted slats, along with a higher foot end, to prevent the mattress from sliding or shifting during use.
Image: Diagram illustrating how the built-in slats and frame design prevent the mattress from sliding.
- Opbevaring under sengen: The bed frame provides approximately 13 inches of clearance from the ground, offering ample space for under-bed storage. Utilize this space for boxes, bins, or other items to maximize room organization.
Billede: View showing the 13-inch ground clearance under the bed frame, suitable for storage containers.
Opretholdelse
- Rensning: Wipe clean with a dry cloth. Avoid using harsh chemicals or abrasive cleaners that may damage the finish.
- Regelmæssig inspektion: Kontrollér regelmæssigt alle bolte og forbindelser for at sikre, at de er stramme. Spænd dem igen om nødvendigt for at opretholde stabiliteten og forhindre knirken.
- Fodkapper: Ensure the protective foot caps are intact to prevent floor damage and maintain stability.
Fejlfinding
- Knirkende lyde: If the bed frame squeaks, check all bolts and ensure they are securely tightened. Loose connections are a common cause of noise.
- Ustabilitet/Vinklen: Verify that all components are correctly assembled according to the instructions. Ensure the bed is on a level surface. Re-tighten all hardware.
- Manglende dele: If any parts are missing upon arrival, refer to the package contents list and contact Yaheetech customer support for assistance.
- Madrasglidende: Ensure the mattress is properly centered on the slats and that the footboard and side rails are correctly installed to contain the mattress.
Specifikationer
| Feature | Detalje |
|---|---|
| Standard størrelse | Tvilling |
| Materiale | Jern |
| Vægt kapacitet | 450 lb |
| Gældende madrasstørrelse | 75"x39" |
| Overordnede mål (L x B x H) | 77.5 cm L x 41 cm B x 41.5 cm H |
| Frihøjde | 13 tommer |
| Farve | Hvid |
| Finish Type | Pulverlakeret |
| Montering påkrævet | Ja |
Image: Detailed diagram illustrating the dimensions and key specifications of the bed frame.
Garanti og support
For warranty information, product support, or to inquire about replacement parts, please contact Yaheetech customer service directly. Refer to your purchase documentation or the official Yaheetech webwebsted for kontaktoplysninger.
Online ressourcer og ofte stillede spørgsmål kan også være tilgængelige på Yaheetech-butik.
