GLOBE Electric Devo 2-Light Flush Mount Ceiling Light Instruction Manual

Produkt overview

The GLOBE Electric Devo 2-Light Flush Mount Ceiling Light (Model 66000081) is designed to provide elegant and versatile lighting for various indoor spaces. This fixture features a matte brass finish and a tiered white milk glass shade, offering a sophisticated aesthetic. Its flush mount design is suitable for rooms with standard or lower ceilings, making it an ideal choice for bedrooms, dining rooms, hallways, and entryways. The light is compatible with two E12 base 40W bulbs (sold separately) and supports dimming with a compatible dimmer switch (also sold separately).

Billede: Forside view of the GLOBE Electric Devo 2-Light Flush Mount Ceiling Light, showcasing its matte brass band and tiered white milk glass shade.

Image: The light fixture installed on a ceiling in a modern living room setting, demonstrating its flush mount profile.

Sikkerhedsoplysninger

• Sluk altid for hovedstrømforsyningen ved afbryderen, før du påbegynder installation eller udfører vedligeholdelse.
• Kontakt en kvalificeret elektriker, hvis du er usikker på installationsprocessen.
• Brug kun E12-fatningspærer med en maksimal watttage på 40W pr. pære.
• Sørg for, at alle elektriske forbindelser er sikre og overholder lokale el-forskrifter.
• This fixture is designed for indoor use only and is not water resistant. Do not install in damp eller våde steder.
• Håndter glaskomponenter forsigtigt for at forhindre brud.

Inkluderede komponenter

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included instruction sheet for a detailed parts list.

• Flush Mount Ceiling Light Fixture (Matte Brass Finish)
• Tiered White Milk Glass Shade
• Monteringshardware (skruer, trådmøtrikker, monteringsbeslag)
• Instruktionsark

Note: E12 base 40W max bulbs and a compatible dimmer switch are ikke medfølger og skal købes separat.

Opsætning og installation

Nødvendige værktøjer (ikke inkluderet):

• Phillips hovedskruetrækker
• Trådstrippere
• Elektrisk tape (valgfrit)
• Stige

Installationstrin:

1. Sluk for strømmen: Locate the circuit breaker controlling the light fixture's circuit and turn it off. Verify power is off using a voltage tester.
2. Forbered monteringsoverfladen: Hvis du udskifter en eksisterende armatur, skal du forsigtigt fjerne den. Sørg for, at samledåsen er sikkert monteret og kan bære armaturets vægt.
3. Fastgør monteringsbeslag: Secure the provided mounting bracket to the junction box using the screws provided. Ensure the bracket is flush and stable.
4. Foretag elektriske forbindelser:
   • Tilslut armaturets sorte ledning (fase) til den sorte ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Tilslut armaturets hvide ledning (neutral) til den hvide ledning fra samledåsen ved hjælp af en trådmøtrik.
   • Connect the fixture's ground wire (bare copper or green) to the ground wire from the junction box (or to the green ground screw on the mounting bracket).
   • Ensure all connections are tight and secure. Wrap wire nuts with electrical tape for added security if desired.
5. Monter armaturet: Carefully tuck all wires into the junction box. Align the fixture with the mounting bracket and secure it using the provided screws.
6. Installer glasskærm: Gently attach the tiered white milk glass shade to the fixture according to the specific instructions in the included sheet. Ensure it is securely fastened.
7. Installer pærer: Screw two E12 base 40W max bulbs (sold separately) into the sockets.
8. Gendan strøm: Turn the main power supply back on at the circuit breaker. Test the light fixture.

Image: Diagram showing the dimensions of the light fixture: 11.8 inches (30 cm) in diameter and 4.5 inches (11.5 cm) in height.

Betjeningsvejledning

The GLOBE Electric Devo 2-Light Flush Mount Ceiling Light operates via a standard wall switch. For dimming functionality, ensure a compatible dimmer switch is installed.

• Tænd/sluk: Brug vægkontakten, der er tilsluttet armaturet, til at tænde eller slukke lyset.
• Dæmpning (valgfrit): If a compatible dimmer switch is installed, adjust the dimmer control to achieve the desired light intensity. Ensure that the E12 bulbs used are also dimmable.

Opretholdelse

• Rensning:

  Before cleaning, ensure the power to the fixture is turned off at the circuit breaker. Wipe the metal parts with a soft, dry cloth. For the glass shade, use a soft, damp cloth with a mild, non-abrasive cleaner if necessary, then dry thoroughly. Avoid using harsh chemicals or abrasive cleaners as they may damage the finish or glass.

• Udskiftning af pære:

  Turn off the power at the circuit breaker. Allow bulbs to cool completely before touching. Carefully unscrew the old E12 bulbs and screw in new E12 base 40W max bulbs. Do not overtighten. Restore power after replacement.
• Inspektion:

  Periodically inspect the fixture for any loose wires, damaged components, or signs of wear. If any issues are found, turn off power and consult a qualified electrician.

Fejlfinding

Specifikationer

Garanti og support

Dette produkt kommer med Ingen garanti as per manufacturer specifications. For any questions regarding installation, operation, or troubleshooting that are not covered in this manual, please contact GLOBE Electric customer support.

GLOBE Electric Customer Support:

• Refer to the contact information provided on the product packaging or the official GLOBE Electric webwebstedet for de seneste supportoplysninger.
• When contacting support, please have your model number (66000081) and purchase information ready.