Indledning
This manual provides essential information for the safe and efficient operation of your Amazon Basics 8-Sheet Cross-Cut Shredder. Please read these instructions carefully before initial use and retain for future reference. This shredder is designed for personal and home office use to destroy sensitive documents, CDs, and credit cards.
Image: Amazon Basics 8-Sheet Cross-Cut Shredder, showcasing its compact black design with a clear window on the waste bin.
Vigtige sikkerhedsoplysninger
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or injury.
- Hold børn og kæledyr væk fra makuleringsmaskinen.
- Keep loose clothing, jewelry, hair, and hands away from the paper entry slot.
- Do not store or spray aerosol products in or near the shredder.
- Do not shred metallic credit cards, wet paper, or adhesive labels.
- Always unplug the shredder when moving, cleaning, or emptying the waste bin.
- Brug ikke makulatoren, hvis netledningen er beskadiget.
- Avoid placing the shredder near heat sources or in direct sunlight.
- Sørg for, at makulatoren er placeret på en stabil, plan overflade.
Opsætning
- Pakker ud: Tag forsigtigt makulatoren ud af emballagen.
- Placering: Place the shredder on a flat, stable surface. Ensure the waste bin is correctly seated in the base.
- Strømtilslutning: Sæt netledningen i en almindelig stikkontakt.
- Indledende kontrol: Ensure the power switch is in the 'OFF' position before plugging in.
Betjeningsvejledning
Control Switch and LED Indicators
Image: Close-up of the shredder's control panel, illustrating the 4-mode control switch and LED lights.
- FWD (Forward): Manually feeds paper through the shredder.
- AUTO (automatisk): The shredder automatically starts when paper is inserted and stops when shredding is complete. This is the recommended setting for normal operation.
- OFF: Turns the shredder off. Always set to OFF when not in use or during maintenance.
- REV (Baglæns): Reverses the shredding mechanism to clear paper jams.
LED-indikatorer:
- Green Light (Power): Indicates the shredder is powered on and ready for operation.
- Red Light (Overheat/Overload): Illuminates to indicate the shredder is overheating or overloaded. Allow the unit to cool down or reduce the amount of material being shredded.
Image: Top panel detail showing LED indicators, 4-mode switch, and capacity icons.
Makulering af dokumenter
Image: Demonstrates shredding of up to 8 sheets of paper and a single credit card.
- Set the control switch to 'AUTO'.
- Insert up to 8 sheets of 75 gsm paper into the paper entry slot. The shredder will start automatically.
- For credit cards or CDs, insert one item at a time into the dedicated slot.
- The shredder has a 3-minute continuous run time. After this, it requires a 30-minute cool-down period to prevent overheating. The red LED will indicate if the unit is too hot.
- The shredder can destroy staples and small paper clips, but it is recommended to remove them to prolong blade life. Do not shred metallic credit cards.
Image: A person feeding paper into the shredder, demonstrating typical use.
Opretholdelse
- Tømning af affaldsbeholderen: Regularly check and empty the 14-liter waste bin to prevent paper jams and ensure optimal performance. Unplug the shredder before removing the bin.
- Rensning: Wipe the exterior of the shredder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Smøring: To maintain shredder performance and prolong blade life, lubricate the cutting blades periodically. Use shredder lubricant sheets or apply shredder oil directly to the paper entry slot while running the shredder in 'FWD' mode with a few sheets of paper. Follow the lubricant manufacturer's instructions.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Makulatoren tænder ikke. | Not plugged in; power switch in 'OFF' position; waste bin not correctly seated. | Ensure power cord is securely plugged in; set switch to 'AUTO'; ensure waste bin is fully inserted. |
| Shredder stops during operation (Red LED on). | Overheating; overloaded. | Allow the shredder to cool down for 30 minutes; reduce the number of sheets being fed. |
| Papirstop. | Too much paper inserted; paper not fed straight. | Set switch to 'REV' to clear the jam. If unsuccessful, unplug, carefully remove paper, then plug in and try 'REV' again. Lubricate blades if jams are frequent. |
| Shredder runs continuously in 'AUTO' mode. | Sensor blokeret. | Unplug the shredder and clean the paper entry sensor (usually a small clear window or lens). |
Specifikationer
Image: Illustrates the P-4 security level, showing paper shredded into 0.2 x 0.7 inch particles.
- Mærke: Grundlæggende om Amazon
- Modelnummer: C276-A
- Farve: Sort
- Makuleringstype: Cross-Cut (Security Level P-4, 0.2 x 0.7 inches / 5 x 18 mm particles)
- Arkkapacitet: 8 ark (75 gsm papir)
- Strimler: Paper, CDs, Credit Cards (one at a time)
- Affaldsbeholderkapacitet: 14 liter
- Kontinuerlig kørselstid: 3 minutter
- Nedkølingstid: 30 minutter
- Strømkilde: El-ledning
- Støjniveau: 68 dB
- Dimensioner (B x D x H): 18.3 cm x 32.5 cm x 35.1 cm (7.2 tommer x 12.8 tommer x 13.8 tommer)
Image: Detailed diagram illustrating the width, depth, and height of the shredder.
Garanti og support
This Amazon Basics product is covered by a limited warranty. Please refer to the warranty information provided with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Amazon Basics customer service through the Amazon webwebsted eller din købsplatform.
