1. Introduktion
The Behringer Edge is a powerful semi-modular analog percussion synthesizer designed to deliver a wide range of percussive and rhythmic sounds. It combines classic analog synthesis with modern sequencing capabilities, offering extensive sound design possibilities through its dual VCO architecture, multimode filter, and comprehensive patch matrix.
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Behringer Edge. Please read it thoroughly to ensure proper use and to maximize your experience with this instrument.
Nøglefunktioner:
- Analog Semi-modular Percussion Synthesizer with 15 x 10 I/O Patch Matrix
- Dual VCO architecture with PWM and triangle waves
- White/Pink Noise generation
- Multimode 24dB ladder filter
- 2 x 8-step Sequencer with velocity controls
- MIDI Channel Voice Priority Selection
- Three decay envelopes for precise control
2. Vigtige sikkerhedsinstruktioner
To reduce the risk of electric shock, fire, and/or injury, always follow the basic safety precautions listed below:
- Strømkilde: Connect the unit only to the specified power adapter. Ensure the voltage opfylder enhedens krav.
- Ventilation: Bloker ikke nogen ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Vand og fugt: Do not use this apparatus near water or expose it to dripping or splashing. Do not place objects filled with liquids on the apparatus.
- Varme: Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Rensning: Rengør kun med en tør klud.
- Service: Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.
3. Opsætning
3.1 Udpakning
Carefully unpack your Behringer Edge and check for any signs of damage. Retain the packaging materials for future transport or storage.
3.2 Strømtilslutning
Connect the included power adapter to the DC input on the rear panel of the Edge, then plug the adapter into a suitable power outlet.
3.3 Lydforbindelser
The Edge features a 1/4" TS audio output. Connect this output to your mixer, audio interface, or amplifier ved hjælp af et standard instrumentkabel.
3.4 MIDI-forbindelser
Use standard 5-pin DIN MIDI cables to connect the Edge to other MIDI devices. The MIDI IN port receives MIDI data, while the MIDI OUT/THRU port can send MIDI data or pass through incoming MIDI data.
3.5 USB-forbindelse
Connect the USB Type B port on the Edge to your computer using a USB cable for MIDI over USB functionality and firmware updates.
3.6 Indledende tænding
Once all connections are made, power on the Behringer Edge. The unit will perform a brief startup sequence.
4. Betjening
The Behringer Edge features a clearly laid out control panel. Below is an overview of the main sections and their functions.
Figure 4.1: Front Panel Layout of the Behringer Edge.
This image displays the entire front panel of the Behringer Edge synthesizer. It is organized into several distinct sections: MIDI and Patch Matrix at the top, Oscillator sections (VCO 1 and VCO 2) on the left, EG (VCO 1 & 2), Noise, Filter (VCF), and Output (VCA) sections on the right, and the Sequencer section at the bottom. Each section contains various knobs, switches, and patch points for sound shaping and control.
4.1 Top Panel: MIDI and Patch Matrix
The top section provides MIDI connectivity and a comprehensive 15x10 patch matrix for routing control voltages and audio signals.
- MIDI IN: 5-pin DIN input for receiving MIDI data.
- MIDI OUT/THRU: 5-pin DIN output for sending MIDI data or passing through incoming MIDI data.
- Patch Points (Top Row - Inputs): OSC1CV, OSC2CV, OSC DECAY, ADV/CLOCK, TRIGGER, VELOCITY, NOISE LEVEL, OSC1, OSC2, OSCEG, TRIGGER, VELOCITY, PHONES IN, PHONES OUT. These are control voltage (CV) inputs for modulating various parameters.
- Patch Points (Bottom Row - Outputs): 1-2 FM AMT, EXT AUDIO, TEMPO, PLAY/STOP, VCF MOD, VCF DECAY, VCA CV, VCA DECAY, PITCH, VCF EG, VCA, VCA EG. These are CV outputs or audio outputs for routing signals to other modules or inputs.
4.2 Oscillator Sections (VCO 1 & VCO 2)
The Edge features two Voltage Controlled Oscillators (VCOs) that generate the primary sound sources.
- FREKVENS: Justerer oscillatorens tonehøjde.
- FORM: Selects the waveform (e.g., triangle, pulse).
- KUVERT: Controls the amount of envelope modulation applied to the oscillator's pitch.
- SEQ PITCH MOD (OSC 1): Modulates the pitch of OSC 1 based on the sequencer.
- HARD SYNC (OSC 2): Synchronizes OSC 2 to OSC 1, creating complex timbres.
4.3 EG (VCO 1 & 2)
This section controls the Envelope Generator for the VCOs.
- HENFALD: Sets the decay time of the envelope.
- NIVEAU: Adjusts the overall level of the envelope.
- 1-2 FM AMT: Controls the amount of frequency modulation from VCO 1 to VCO 2.
4.4 Støj
Generates noise for percussive sounds or texture.
- FARVE: Selects between Pink and White noise.
- NOISE/EXT: Adjusts the level of the internal noise generator or an external audio input.
4.5 Filter (VCF)
Voltage Controlled Filter shapes the timbre of the sound.
- VCF (HP/LP): Selects between High-Pass and Low-Pass filter modes.
- SKÆRE AF: Indstiller filterets afskæringsfrekvens.
- RESONANS: Boosts frequencies around the cutoff point.
- HENFALD: Controls the decay time of the filter envelope.
- KUVERT: Adjusts the amount of envelope modulation applied to the filter cutoff.
- NOISE/VCF MOD: Controls the amount of noise or VCF modulation.
4.6 Output (VCA)
Voltage Kontrolleret Amplifier controls the overall volume and dynamics.
- VCA MODE (FAST/SLOW): Selects between fast and slow VCA response times.
- HENFALD: Sets the decay time of the VCA envelope.
- BIND: Justerer masterudgangslydstyrken.
4.7 Sequencer
The built-in 8-step sequencer allows for rhythmic pattern creation.
- TID: Justerer sequencerens afspilningshastighed.
- CLOCK (MIDI/USB/INT/EXT): Selects the clock source for the sequencer.
- VÆGT: Sets the quantization scale for pitch steps.
- TONEHØJDE: Adjusts the pitch for each sequencer step.
- PLAY/STOP/ADVANCE: Transport controls for the sequencer.
- VEL (Velocity): Adjusts the velocity for each sequencer step.
5. Vedligeholdelse
5.1 Rengøring
To clean the Behringer Edge, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish and controls.
5.2 Opbevaring
When not in use for extended periods, store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for safe storage and transport.
5.3 firmwareopdateringer
Kontroller Behringer regelmæssigt website for available firmware updates. Firmware updates can provide new features, improvements, and bug fixes. Follow the instructions provided with the firmware update package carefully.
6. Fejlfinding
If you encounter issues with your Behringer Edge, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | Incorrect audio connections, low volume, VCA settings. | Check audio cables, ensure VOLUME knob is turned up, verify VCA DECAY and VCA MODE settings. |
| Sequenceren afspiller ikke | Sequencer not started, incorrect clock source, tempo too low. | Press PLAY, check CLOCK source (MIDI, USB, INT, EXT), increase TEMPO. |
| Unexpected sound behavior | Complex patch routing, extreme parameter settings. | Reset parameters to default (if possible, or manually), simplify patch connections, adjust knobs to moderate levels. |
| MIDI svarer ikke | Incorrect MIDI connections, wrong MIDI channel, USB driver issues. | Verify MIDI IN/OUT connections, ensure MIDI channels match, reinstall USB drivers if using USB MIDI. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnavn | Edge |
| Varemodelnummer | 0718-ABM |
| UPC | 787790550259 |
| Varens vægt | 4.25 pund (1.93 kg) |
| Produktmål (L x B x H) | 16.7 x 8.3 x 3.6 tommer (42.4 x 21.1 x 9.1 cm) |
| Kropsmateriale | Plast |
| Connector Type | USB Type B |
| Farve | Lyserød |
8. Garanti og support
8.1 Garantioplysninger
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Behringer webwebsted.
8.2 Teknisk support
If you require technical assistance or have questions not covered in this manual, please contact Behringer customer support. Support contact information can typically be found on the official Behringer webwebsted eller i produktemballagen.
Before contacting support, please have your product model number (0718-ABM) and serial number ready, along with a clear description of the issue.
