GLOBE Electric 32982 Bevægelsessensor Væglampe Brugermanual

Indledning

The GLOBE Electric 32982 1-Light Motion Sensor Wall Sconce is a weather-resistant outdoor lighting fixture designed to enhance security and ambiance. Featuring a matte black finish and clear seeded glass shade, this sconce offers 150-degree motion detection up to 30 feet away, providing brighter illumination when activated. It allows for customizable low-level light brightness settings (off, 30%, 50%, or 70%) to suit various needs and occasions. This manual provides essential information for safe installation, operation, and maintenance of your wall sconce.

Sikkerhedsoplysninger

ADVARSEL: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unsure about proper installation, consult a qualified electrician.

• Tilslut ikke denne armatur til et ujordet elektrisk system.
• Overskrid ikke det maksimale wattage specificeret for pæren.
• Håndter glaskomponenter forsigtigt for at forhindre brud.
• Hold emballagemateriale væk fra børn.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1x Wall Sconce
• 1x Glass Shade (Clear Seeded)
• Monteringshardware
• Instruktionsark (denne manual)
• Note: E26/Medium Base 60W Bulb is sold separately and not included.

Figure 1: GLOBE Electric 32982 Motion Sensor Wall Sconce (Matte Black with Clear Seeded Glass Shade)

Specifikationer

Figure 2: Product Dimensions for Installation Planning

Opsætning og installation

This wall sconce is designed for hardwired installation. Professional installation is recommended if you are not familiar with electrical wiring.

Før du begynder:

• Sluk for strømmen at the main circuit breaker or fuse box.
• Sørg for, at monteringsfladen er ren, tør og strukturelt sund.
• Pak alle komponenter ud, og kontroller dem for eventuelle skader.

Installationstrin:

1. Fastgør monteringsudstyr: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level and firmly attached.
2. Foretag elektriske forbindelser:
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire.
   • Connect the fixture's hot wire (usually black) to the house hot wire (black).
   • Connect the fixture's neutral wire (usually white) to the house neutral wire (white).
   • Fastgør alle forbindelser med trådmøtrikker og pak dem ind med elektrikertape for ekstra sikkerhed.
3. Monter armaturet: Carefully align the fixture with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the wall.
4. Installer pære: Screw in one E26/Medium Base 60W maximum bulb (sold separately). Compatible with LED and Incandescent bulbs.
5. Fastgør glasskærm: Carefully place the clear seeded glass shade onto the fixture and secure it according to the design (e.g., with retaining ring or screws).
6. Gendan strøm: Når installationen er færdig, skal du tænde for strømmen igen ved afbryderen.

Figur 3: Eksample of Installed Wall Sconce

Betjeningsvejledning

Your GLOBE Electric Motion Sensor Wall Sconce is designed for automatic operation based on motion detection and ambient light levels.

Bevægelsessensorens funktionalitet:

• The integrated motion sensor detects movement within a 150-degree field and up to 30 feet away.
• When motion is detected, the light will illuminate at full brightness.
• The light will remain on as long as motion is detected within its range. After motion ceases, the light will turn off after a preset delay (typically a few minutes, consult specific product settings if adjustable).

Figure 4: Motion Activated Feature

Low-Level Light Brightness Adjustment:

This fixture allows you to adjust the low-level illumination when no motion is detected. This setting is typically controlled via a switch or dial on the fixture itself, or potentially through a compatible smart bulb if installed (sold separately).

• Slukket: The light remains off when no motion is detected.
• 30 %: The light stays on at 30% brightness when no motion is detected.
• 50 %: The light stays on at 50% brightness when no motion is detected.
• 70 %: The light stays on at 70% brightness when no motion is detected.

Refer to the physical fixture for the exact location of the brightness adjustment control.

Opretholdelse

Regular maintenance will ensure the longevity and optimal performance of your wall sconce.

Rensning:

• Sluk altid for strømmen ved afbryderen før rengøring.
• Tør armaturet af med en blød kludamp klæde.
• Do not use abrasive cleaners or solvents, as these may damage the finish or glass.
• Clean the motion sensor lens periodically to ensure proper detection.

Udskiftning af pære:

• Sørg for, at strømmen er slukket ved afbryderen.
• Lad pæren køle helt af, før du rører ved den.
• Carefully remove the glass shade to access the bulb.
• Unscrew the old bulb and replace it with a new E26/Medium Base bulb, not exceeding 60W.
• Reattach the glass shade securely.
• Gendan strømmen.

Fejlfinding

If you experience issues with your wall sconce, refer to the following common problems and solutions:

Garanti og support

Dette produkt sælges med Ingen garanti as per manufacturer specifications. For technical support or inquiries, please visit the official GLOBE Electric webwebsted eller kontakt deres kundeserviceafdeling.

GLOBE Electric Official Webwebsted: www.globe-electric.com