1. Introduktion
This manual provides detailed instructions for the safe installation, correct operation, and proper maintenance of the DINUY PT Sup EL4 3-Wire Tactile Push-Button Timer. Please read this manual thoroughly before attempting any installation or operation to ensure optimal performance and safety. Keep this manual for future reference.
2. Sikkerhedsoplysninger
ADVARSEL: Electrical installation should only be performed by a qualified and licensed electrician.
- Always disconnect power at the main circuit breaker before performing any installation, maintenance, or troubleshooting.
- Kontroller, at forsyningen voltage matches the specifications of the device (230 V AC, 50 Hz).
- Må ikke installeres i vådt eller damp locations. The device has an IP20 protection rating, suitable for indoor dry environments.
- Ensure all wiring connections are secure and correctly insulated to prevent short circuits or electric shock.
- Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
3. Produktet er slutview og funktioner
The DINUY PT Sup EL4 is a sophisticated 3-wire tactile push-button timer designed for controlling various types of lighting fixtures. Its modern design and advanced features make it suitable for a wide range of residential and commercial applications.
Figur 1: Forside view of the DINUY PT Sup EL4 Tactile Push-Button Timer. This image shows the white square-shaped device with a central power symbol, a small blue LED indicator, and two visible mounting screws.
Nøglefunktioner:
- 3-leder installation: Requires Phase (L), Neutral (N), and Lamp Return (L') for connection.
- Universal kompatibilitet: Suitable for all types of luminaires, including LED lamps, incandescent, halogen (230V and 12V with electronic/ferromagnetic transformers), and fluorescent lamps.
- Tactile Operation: Easy and intuitive control with a gentle touch.
- Justerbar timer: Configurable timing from 30 seconds to 12 minutes.
- Rearmable Function: The timer can be reset at any point during its cycle by another touch.
- Permanent Luminous LED: An integrated LED remains illuminated, indicating the device's status and aiding visibility in the dark.
- Overflademontering: Designed for easy surface wall installation.
- Sikkerhedsskruer: Includes screws designed to deter unauthorized removal.
- Zero-Crossing Detection: Enhances relay life and reduces electrical noise.
- Contactor Support: Can be used in conjunction with a contactor for higher load applications.
4. Installationsvejledning
Before beginning installation, ensure the main power supply to the circuit is turned OFF at the circuit breaker. This device is designed for surface mounting in a universal box.
4.1 Ledningsdiagram
The DINUY PT Sup EL4 requires a 3-wire connection. Refer to the diagram below for correct wiring.
Figure 2: Wiring diagram for the DINUY PT Sup EL4. The diagram illustrates a 3-wire connection: 'L' for Phase, 'N' for Neutral, and a connection to the lamp. The dashed lines indicate optional connections for additional push-buttons (L) or neutral (N) connections.
- Tilslut Fase (L) wire from the electrical supply to the terminal marked 'L' on the device.
- Tilslut Neutral (N) wire from the electrical supply to the terminal marked 'N' on the device.
- Tilslut Lamp Return (L') wire (the wire going to the light fixture) to the terminal indicated by the lamp symbol (often labeled with an arrow pointing down to a circle with an 'X').
- Sørg for, at alle forbindelser er tætte og sikre.
4.2 Montering
- After wiring, carefully place the device into the universal wall box.
- Secure the device to the wall box using the provided security screws. Do not overtighten.
- Once mounted, restore power at the main circuit breaker.
5. Betjeningsvejledning
5.1 Grundlæggende betjening
- To turn on the connected light, gently touch the tactile surface of the push-button. The light will illuminate, and the timer will begin its cycle.
- The integrated blue LED will remain permanently illuminated, indicating the device is powered and ready for operation.
5.2 Timer funktion
- Once activated, the light will remain on for the preset duration (adjustable between 30 seconds and 12 minutes).
- To extend the lighting duration, simply touch the tactile surface again at any point during the active timer cycle. This will rearm the timer, restarting the countdown from its full preset duration.
- The light will automatically turn off once the timer cycle completes without being rearmed.
6. Vedligeholdelse
The DINUY PT Sup EL4 is designed for long-term, maintenance-free operation. However, periodic cleaning and inspection can help ensure its longevity and proper function.
- Rensning: To clean the surface of the device, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
- Inspektion: Periodically check the device for any visible damage or loose connections. If any issues are found, disconnect power immediately and consult a qualified electrician.
- Ingen dele, der kan serviceres af brugeren: There are no user-serviceable parts inside the device. Do not attempt to open or repair the unit yourself.
7. Fejlfinding
If you experience issues with your DINUY PT Sup EL4, refer to the following common troubleshooting steps:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til enheden. Forkert ledningsføring. Defekt lamp. | Check the circuit breaker. Ensure power is restored. Bekræft ledningsføringen i forhold til diagrammet (afsnit 4.1). Test lamp with another switch or replace it. |
| Light stays on permanently or turns off too quickly. | Timer setting issue. Enhedsfejl. | The timer duration is factory set or adjusted internally. If the behavior is inconsistent with expected operation, consult a qualified electrician. If the issue persists after checking power and wiring, the device may require professional inspection. |
| Blue LED indicator is off. | Ingen strøm til enheden. | Check the circuit breaker and ensure power is supplied to the device. |
If these steps do not resolve the issue, contact a qualified electrician or the manufacturer's support for assistance. Do not attempt to repair the device yourself.
8. Detaljerede specifikationer
| Parameter | Værdi |
|---|---|
| Forsyning Voltage | 230 V AC |
| Frekvens | 50 Hz |
| Eget forbrug | 0.7 W |
| Relay Cut-off Power | 16 A |
| Max. Load (LED Lamps) | 400 W |
| Max. Load (Incandescent & Halogen 230V) | 3000 W |
| Max. Load (Halogen 12V with Electronic Transformer) | 3000 W |
| Max. Load (Halogen 12V with Ferromagnetic Transformer) | 2400 W |
| Max. Load (Fluorescent Lamps) | 1300 W (1300 VA) |
| Contactor Support | Ja |
| Nulkrydsningsdetektion | Ja |
| Installationstype | 3 wires (Phase, Neutral, Lamp Return) |
| Permanent Lighting Function | Ingen |
| Stop Warning Function | Ingen |
| Minimum Timer Duration | 30 sekunder |
| Maksimal timervarighed | 12 minutter |
| Tidsindstillet switch | Ingen |
| Luminous Push-buttons Support | Ingen |
| Driftstemperatur | 0°C til 40°C |
| Permanent Luminous LED | Ja |
| Montering | Universal box, Surface, Security screws |
| Miljøbeskyttelse | IP20 (according to UNE20324) |
| Overholdelsesstandarder | UNE-EN60669-2-1 and UNE-EN60669-2-3 |
9. Garanti og support
Specific warranty information for the DINUY PT Sup EL4 is typically provided at the point of purchase or within the product packaging. Please refer to your purchase documentation for details regarding warranty coverage and duration.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact your retailer or the official DINUY customer service. Contact information can usually be found on the manufacturer's webwebsted eller produktemballage.
