Indledning
The Vortex Optics AMG UH-1 Gen II Holographic Sight is designed for rapid target acquisition and enhanced situational awareness. This advanced holographic display offers four night vision compatible settings and a dedicated night vision button for versatile use in various lighting conditions. Its robust construction ensures durability and reliable performance in the field.
Key features include an enlarged viewing window for an improved sight picture, a toolless battery cover for easy battery changes, and a lighter load at just 11 ounces. The lightning-quick EBR-CQB reticle with 15 illumination settings and our FHQ technology virtually eliminates stray light emissions for zero forward signature. An integrated, quick-release mount makes the sight easy to install and puts the optic at lower 1/3 cowitness height on either Weaver or Picatinny rails. Rugged construction creates a shockproof sight. Ultra-hard, scratch-resistant ArmorTek coating protects exterior lenses from scratches, oil and dirt. O-ring seals help to provide waterproof and fogproof performance in the field.
Opsætning
Installation af batteri
The AMG UH-1 Gen II uses a CR123A 3V Lithium battery. To install or replace the battery:
- Locate the toolless battery cover on the side of the sight.
- Unscrew the battery cover by hand.
- Insert the CR123A battery with the positive (+) end facing inwards.
- Replace the battery cover and tighten it securely by hand.

Figur 1: Side view of the UH-1 Gen II, highlighting the battery compartment.
Montering af sigtet
The sight features an integrated quick-release mount for easy attachment to Weaver or Picatinny rails. This mount positions the optic at a lower 1/3 cowitness height.
- Ensure the quick-release lever is in the open position.
- Align the sight's mount with the rail slots.
- Press down firmly on the sight to seat it onto the rail.
- Close the quick-release lever until it locks securely. Ensure the sight is firmly attached and does not wobble.

Figure 2: Annotated diagram showing the integrated quick-release mount and other features.
Betjeningsvejledning
Tænd/sluk og justering af lysstyrke
The AMG UH-1 Gen II features intuitive controls for power and brightness located on the rear of the sight.
- For at tænde sigtet skal du trykke på enten minus (-) or Plus (+) knap.
- For at øge lysstyrken skal du trykke på Plus (+) button. There are 15 illumination settings available.
- For at mindske lysstyrken skal du trykke på minus (-) knap.
- To turn off the sight, press and hold both the minus (-) og Plus (+) buttons simultaneously until the reticle disappears.

Figur 3: Bagside view of the UH-1 Gen II, showing the brightness and night vision control buttons.
Night Vision (NV) Mode
The sight includes a dedicated NV button for seamless transition to night vision compatible settings.
- Tryk på NV button to activate night vision mode. There are four NV compatible settings.
- Brug minus (-) og Plus (+) buttons to adjust brightness within the night vision mode.
- Tryk på NV button again to exit night vision mode and return to standard illumination settings.
Elevation and Windage Adjustment
Adjustments for elevation (vertical) and windage (horizontal) are made using the turrets on the side of the sight. Each click adjusts the point of impact by 0.5 MOA.
- Højdejustering: Located on the top-right side (when viewed from the rear). Turn the dial UP to move the point of impact up, and NED to move it down.
- Windage Justering: Located on the right side (when viewed from the rear). Turn the dial HØJRE to move the point of impact right, and VENSTRE to move it left.

Figur 4: Side view of the UH-1 Gen II, indicating elevation and windage adjustment points.
EBR-CQB Reticle
The sight utilizes the EBR-CQB reticle, designed for fast and precise aiming. This reticle provides a clear aiming point for close-quarters battle scenarios.

Figure 5: Representation of the EBR-CQB reticle as seen through the sight.
Opretholdelse
Linsepleje
The exterior lenses are protected by an ArmorTek coating, making them scratch-resistant. To maintain optical clarity:
- Gently brush away any loose dirt or dust from the lenses using a soft brush or compressed air.
- Use the provided lens cloth or a clean, soft microfiber cloth to wipe the lenses.
- For stubborn smudges or fingerprints, apply a small amount of lens cleaning solution to the cloth, not directly to the lens, and gently wipe.
- Avoid using harsh chemicals, abrasive cloths, or excessive force, as this can damage the lens coatings.
Udskiftning af batteri
Refer to the "Battery Installation" section under Setup for detailed instructions on replacing the CR123A battery. Regular battery checks are recommended to ensure optimal performance.
Fejlfinding
If you encounter issues with your AMG UH-1 Gen II Holographic Sight, consider the following common troubleshooting steps:
- Sigtekorn lyser ikke: Check the battery. Ensure it is a fresh CR123A battery and is inserted with the correct polarity. Tighten the battery cap securely.
- Reticle Appears Dim: Adjust the brightness settings using the Plus (+) button. If in night vision mode, ensure it is set to an appropriate brightness level for your environment.
- Reticle Flickering: This can sometimes occur with holographic sights. Ensure the battery is fully seated and the cap is tight. If the issue persists, try a new battery.
- Sight Not Holding Zero: Ensure the sight is securely mounted to the rail. Check that the quick-release lever is fully engaged and tightened. Verify that the rail itself is stable and not loose.
- Dugfri linser: The sight is O-ring sealed for fogproof performance. If fogging occurs internally, contact Vortex Optics customer support. External fogging can be wiped away with a lens cloth.
For problemer, der ikke er løst med disse trin, henvises til afsnittet Garanti og support.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Vortex |
| Modelnavn | Razor AMG UH-1 Gen II Holographic Sight - 1 MOA Sight V-AMG-HS02 |
| Farve | Sort |
| Stil | UH-1 Holographic Sight |
| Sport | Jagt, Skydning |
| Varens vægt | 11 ounce |
| Materiale | Aluminium |
| Maksimal forstørrelse | 1x |
| Objektiv linsediameter | 1 |
| Minimum forstørrelse | 1x |
| Kompatible enheder | Riffel |
| Monteringstype | Weaver / Picatinny |
| Nattesyn | Ja |
| UPC | 843829113168 |
| Inkluderede komponenter | Holographic Sight, Product Manual, Lens Cloth, Battery |
Officiel produktvideo
Video 1: Officiel overview of the AMG UH-1 Gen II Holographic Sight by Vortex Optics.
Garanti og support
Vortex Optics stands behind its products with an unlimited, unconditional, lifetime VIP Warranty. This is a fully transferable promise to repair or replace your item if it becomes damaged or defective. This warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder performance.
For warranty claims or technical support, please contact Vortex Optics directly through their official webwebsted eller kundeservicekanaler.
For mere information, besøg den officielle Vortex-butik på Amazon.





