YuanLey 6 Port | 4x2.5G +2x10G SFP

YuanLey 6 Port 2.5G Unmanaged Ethernet Switch Brugermanual

Model: 6 Port | 4x2.5G +2x10G SFP

1. Introduktion

This user manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 6 Port 2.5G Unmanaged Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

The YuanLey 6 Port 2.5G Unmanaged Ethernet Switch is designed to provide high-speed network connectivity for various applications, including 2.5G NAS, 4K video streaming, gaming PCs, and WiFi 6 access points. Its plug-and-play design ensures easy setup without complex configurations.

2. Produktet er slutview

The YuanLey 6 Port 2.5G Unmanaged Ethernet Switch is a compact and fanless network device featuring 4x 2.5 Gigabit Ethernet ports and 2x 10G SFP ports. It is built with a durable metal case and designed for stable, quiet operation.

Nøglefunktioner:

  • 6 Portkonfiguration: Includes 4x 2.5G Base-T ports and 2x 10G SFP ports (compatible with 1G/2.5G modules, SFP modules not included).
  • Super Fast Network Speeds: Offers up to 60Gbps switching capacity, providing 2.5x faster performance than traditional Gigabit switches.
  • One-Key VLAN: Allows isolation of communication between RJ45 ports to enhance network security and reduce unnecessary traffic.
  • Stable and Quiet Operation: Features a durable metal case with 6KV lightning protection, fanless design for silent operation, double-sided cooling holes, and a wide operating temperature range (-10~50°C).
  • Plug and Play: No configuration required; simply connect your devices.
  • Compact Size & Mounting Options: Understøtter både placering på skrivebord og vægmontering.

Produktdiagram:

Front view of the YuanLey 6 Port 2.5G Unmanaged Ethernet Switch
Figur 2.1: Forside view of the YuanLey 6 Port 2.5G Unmanaged Ethernet Switch, showing the 4x 2.5G Ethernet ports, 2x 10G SFP ports, and LED indicators.

This image displays the front panel of the switch, highlighting the four 2.5 Gigabit Ethernet ports (labeled 1-4) and the two 10 Gigabit SFP+ ports (labeled 5-6). The power indicator (PWR) and individual port link/activity LEDs are also visible. The overall design is compact and features a metal casing.

Detaljeret view of the YuanLey 6 Port 2.5G Unmanaged Ethernet Switch ports and indicators
Figur 2.2: Detaljeret view of the switch's DC input, S&V Dip Switch, and port indicators.

This image provides a closer look at the rear and front panels. It points out the DC Input Port (12V1.0A) and the S&V Dip Switch, which allows toggling between Standard Mode (S) and VLAN Mode (V). The PWR LED indicates power status (green for on, grey for off). The 4x 2.5Gbps ports have orange LEDs for 2.5Gbps links and green LEDs for 10/100/1000Mbps links. The SFP Indicator shows a green light when the link is normal.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • 1 x YuanLey 6 Port 2.5G Unmanaged Ethernet Switch
  • 1 x strømadapter
  • 1 x Brugermanual (dette dokument)

4. Opsætning

4.1 Strømtilslutning

  1. Connect the provided power adapter to the DC Input Port (12V1.0A) on the rear panel of the switch.
  2. Sæt strømadapteren i en almindelig stikkontakt.
  3. Verify that the PWR LED on the front panel illuminates green, indicating the switch is powered on.

4.2 Network Connections (Plug and Play)

The YuanLey 6 Port 2.5G Unmanaged Ethernet Switch is designed for plug-and-play operation, requiring no complex software configuration.

  1. For 2.5G Ethernet Devices: Connect your devices (e.g., 2.5G NAS, gaming PC, WiFi 6 AP) to any of the 4x 2.5G Base-T ports (ports 1-4) using standard Ethernet cables (Cat5e or higher recommended for optimal performance).
  2. For 10G SFP Devices: Insert compatible 1G/2.5G/10G SFP modules (not included) into the 2x 10G SFP ports (ports 5-6). Then, connect your fiber optic cables or DAC cables to the SFP modules.
  3. Observe the port LEDs:
    • For 2.5G Base-T ports (1-4): An orange LED indicates a 2.5Gbps link. A green LED indicates a 10/100/1000Mbps link.
    • For 10G SFP ports (5-6): A green LED indicates a normal link connection.
Diagram showing various devices connected to the YuanLey 2.5G switch
Figur 4.1: Eksample network setup with the YuanLey 2.5G switch connecting various devices.

This diagram illustrates how the YuanLey 2.5G switch integrates into a network. It shows connections to a 2.5G NAS, WiFi 6 AP, WiFi 6 Router, Laptop with 2.5G Ethernet Adapter, 2.5G Gaming PC, and 4K Video devices. The image also highlights the use of SFP modules for fiber optic connections, emphasizing the switch's versatility for high-performance networking.

Image showing the compact size and wall-mounting capability of the YuanLey 2.5G switch
Figure 4.2: Compact size and wall-mounting options for the switch.

This image demonstrates the compact dimensions of the switch (5.2 inches long, 2.6 inches wide, 1.26 inches high) and its ability to be wall-mounted. The wall-mount slots are visible on the side, allowing for flexible placement in various environments, such as behind a desk or server rack.

5. Betjeningsvejledning

5.1 Standard Mode vs. VLAN Mode

The switch features an S&V Dip Switch on the rear panel to select between two operating modes:

  • Standard Mode (S): All ports can communicate with each other. This is the default mode and suitable for most home and small office networks.
  • VLAN Mode (V): Communication between RJ45 ports (1-4) is isolated. This enhances network security and reduces unnecessary broadcast traffic, improving performance in specific scenarios. The SFP ports (5-6) typically remain accessible to all RJ45 ports in VLAN mode, acting as uplink ports.

To switch modes, simply toggle the S&V Dip Switch to the desired position. No reboot is typically required, but it is recommended to power cycle the device for the changes to take full effect in some network environments.

5.2 LED-indikatorer

The front panel LEDs provide visual status of the switch:

IndikatorStatusBeskrivelse
PWRGrøn (Til)Enheden er tændt.
PWRSlukketEnheden er slukket.
L1-L4 (RJ45 Ports)Orange (Til)2.5Gbps link established.
L1-L4 (RJ45 Ports)Grøn (Til)10/100/1000Mbps link established.
L1-L4 (RJ45 Ports)BlinkerDataaktivitet på porten.
SFP Indicator (Ports 5-6)Grøn (Til)SFP link connected normally.
SFP Indicator (Ports 5-6)BlinkerData activity on the SFP port.

6. Vedligeholdelse

6.1 Generel pleje

  • Keep the switch in a cool, dry place, away from direct sunlight, heat sources, and excessive moisture.
  • Ensure proper ventilation around the device. Although fanless, adequate airflow helps dissipate heat.
  • Clean the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Undgå at placere tunge genstande oven på kontakten.

6.2 firmwareopdateringer

As an unmanaged switch, this device typically does not require user-initiated firmware updates. Any necessary updates are usually handled internally by the manufacturer. Do not attempt to flash firmware unless specifically instructed by YuanLey support.

7. Fejlfinding

ProblemMulig årsagLøsning
Ingen strøm (PWR-LED slukket)Strømadapteren er ikke tilsluttet eller defekt; stikkontakten virker ikke.Check power adapter connection. Try a different power outlet. Ensure the power adapter is the original one supplied with the switch.
No link light on a connected portIncorrect cable; faulty cable; device not powered on; incompatible SFP module (for SFP ports).Ensure the cable is correctly inserted. Try a different Ethernet cable. Verify the connected device is powered on. For SFP ports, ensure the SFP module is compatible and properly seated.
Langsom netværkshastighedCable quality; connected device limitation; network congestion; VLAN mode enabled unnecessarily.Use Cat6 or higher Ethernet cables for 2.5G connections. Ensure connected devices support 2.5G or 10G speeds. Check for other network activities causing congestion. Verify S&V Dip Switch is in the desired mode (Standard for full communication).
Intermitterende forbindelseLoose cable connection; environmental interference; faulty port.Reseat all network cables. Try connecting to a different port on the switch. Ensure the switch is not near strong electromagnetic interference sources.

If the problem persists after trying the above solutions, please contact YuanLey customer support for further assistance.

8. Specifikationer

FeatureBeskrivelse
Model6 Port | 4x2.5G +2x10G SFP
Havne4x 2.5G Base-T Ethernet, 2x 10G SFP
Dataoverførselshastighed2.5 Gigabits Per Second (RJ45), 10 Gigabits Per Second (SFP)
SkiftekapacitetOp til 60 Gbps
StandarderIEEE802.3bz (2.5G), Auto MDI/MDIX
VLANOne-Key VLAN (RJ45 port isolation)
Etui materialeMetal
KølingFanless Design
Lynbeskyttelse6 KV
Driftstemperatur-10°C til 50°C
Produktdimensioner5.2 x 2.6 x 1.26 tommer (13.2 x 6.6 x 3.2 cm)
Varens vægt1.06 pund (0.48 kg)
Strømindgang12V1.0A DC
UPC790885573729
ASINB0C64N2QN7

9. Garanti og support

YuanLey provides a standard warranty for this product. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official YuanLey webwebsted.

For technical support, troubleshooting assistance, or warranty claims, please contact YuanLey customer service through their official channels. Contact information can typically be found on the product packaging or the YuanLey webwebsted.

Online ressourcer:

10. Officielle produktvideoer

Følgende video giver et visuelt overblikview of the YuanLey 4 Port 2.5G Switch (similar model, demonstrating key features).

Video 10.1: YuanLey 4 Port 2.5G Switch Overview.

This video showcases the YuanLey 4 Port 2.5G Switch, highlighting its design, port configuration, and plug-and-play functionality. It demonstrates the ease of setup and the various applications for which the switch is suitable, such as connecting high-speed devices for gaming, 4K video, and office networks. The video also briefly touches upon features like the fanless design and compact size.

Relaterede dokumenter - 6 Port | 4x2.5G +2x10G SFP

Preview YuanLey 2.5G Unmanaged Switch User Manual and Specifications
User manual for YuanLey 2.5G Unmanaged Ethernet Switches. This document provides information on main application scenarios, port indicator descriptions, and detailed technical specifications for various models including YS25-1602, YS25-1600, YS25-2400, YS25-2402, YS25-4800, YS25-0802T, YS25-1602P, and YS25-2402P.
Preview YuanLey Managed Switch Brugermanual - Gigabit Ethernet-netværkskonfigurationsvejledning
Omfattende brugermanual til YuanLey 28-port Gigabit Managed Switch, med detaljer om hardwareinstallation, web grænsefladenavigation, avanceret netværkskonfiguration (VLAN, QoS, sikkerhed) og fejlfinding. Designet til professionel netværksadministration.
Preview Yuanley 2.5G Unmanaged Ethernet Switch brugermanual og specifikationer
Omfattende brugermanual og tekniske specifikationer til Yuanleys 2.5G Unmanaged Ethernet-switche, inklusive modellerne YS25-1602, YS25-1600, YS25-2400, YS25-2402, YS25-0802T, YS25-1602P og YS25-2402P. Lær om funktioner, applikationsscenarier og detaljerede parametre.
Preview Installationsvejledning til Yuanley Ethernet-switch
Omfattende installationsvejledning til Yuanley Ethernet-switche, der dækker opsætning, sikkerhed og specifikationer på flere sprog.
Preview Yuanley PoE Switch brugermanual og tekniske specifikationer
Denne brugermanual og det tekniske specifikationsdokument indeholder detaljerede oplysninger om Yuanley PoE-switche, herunder anvendelsesscenarier, forklaringer på frontpanelet og omfattende tekniske parametre for forskellige modeller.
Preview YuanLey 2.5 Gbps Ethernet-switch brugermanual
Brugermanual til YuanLey 2.5 Gbps Ethernet-switche, der dækker grænsefladedefinitioner, forklaringer af indikatorer, installationsforholdsregler (sikkerhed og miljø), hardwaretilslutningsprocedurer for RJ45- og SFP-porte, strømtilslutning og detaljerede tekniske specifikationer for modeller med 4, 5 og 8 porte.