1. Produktet er slutview
The Ferm AX-Power 20V Quick Charger (Model CDA1175) is designed for rapid and efficient charging of Ferm AX-Power 20V Li-ion batteries. This charger is compatible with 1.5 Ah, 2.0 Ah, and 4.0 Ah AX-Power battery packs, ensuring your tools are ready for use with minimal downtime.
Nøglefunktioner omfatter:
- Suitable for rechargeable Li-ion batteries.
- Compatible with Ferm AX-Power 20V tools.
- Fast charging: approximately 40 minutes for a 2.0 Ah battery.
- Fast charging: approximately 1 hour for a 4.0 Ah battery.
- Integrated LED indicator for charging status.
- Input voltage: 100-240 V, 50-60 Hz.
Billede 1: Forside view of the Ferm AX-Power 20V Quick Charger, showing the battery slot and LED indicators.
2. Sikkerhedsinstruktioner
Read all safety warnings and instructions carefully before using the charger. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
Generel sikkerhed
- Kun indendørs brug: This charger is designed for indoor use. Do not expose it to rain or wet conditions.
- Elektrisk sikkerhed: Sørg for, at stikkontaktens lydstyrketage matches the charger's specifications (100-240V, 50-60Hz). Do not use damaged cords or plugs.
- Undgå overophedning: Dæk ikke opladeren til under drift. Sørg for tilstrækkelig ventilation.
- Børn og tilskuere: Keep children and untrained persons away from the charger and charging area.
- Inspektion: Before each use, inspect the charger, cable, and plug for any damage. Do not use a damaged charger.
- Tag stikket ud, når det ikke er i brug: Tag altid opladeren ud af stikkontakten, når den ikke er i brug, eller før rengøring.
Battery Specific Safety
- Kompatible batterier: Only charge Ferm AX-Power 20V Li-ion batteries with this charger. Charging other battery types may cause personal injury and damage.
- Batteritilstand: Do not attempt to charge non-rechargeable batteries or visibly damaged batteries.
- Temperatur: Charge batteries within the recommended temperature range (typically 0°C to 40°C).
- Bortskaffelse: Dispose of batteries and chargers responsibly according to local regulations. Do not dispose of batteries in fire.
3. Pakkens indhold
Kontroller venligst pakkens indhold ved modtagelse for at sikre, at alle varer er til stede og ubeskadigede:
- 1 x Ferm AX-Power 20V Quick Charger (Model CDA1175)
- 1 x strømkabel
- 1 x Brugsanvisning (dette dokument)
Image 2: Product packaging, indicating the quick charger and its compatibility.
4. Opsætning
Follow these steps to set up your Ferm AX-Power 20V Quick Charger:
- Pakker ud: Tag forsigtigt opladeren og alt tilbehør ud af emballagen.
- Placering: Place the charger on a stable, flat, and dry surface. Ensure it is away from direct sunlight, heat sources, and moisture.
- Tilslut strøm: Insert the power cable into the charger's input port, then plug the other end into a suitable 100-240V, 50-60Hz electrical outlet.
Image 3: The Ferm AX-Power 20V Quick Charger connected to its power cord.
5. Betjeningsvejledning
Opladning af et batteri
- Sørg for, at opladeren er korrekt tilsluttet en strømkilde.
- Align the Ferm AX-Power 20V Li-ion battery with the charger slot and slide it in until it clicks securely into place.
- Observe the LED indicator on the charger:
- Rød LED: Angiver, at batteriet oplades i øjeblikket.
- Grøn LED: Indikerer, at batteriet er fuldt opladet.
- Once the green LED illuminates, the battery is fully charged. Disconnect the battery from the charger by pressing the release button (if present) and sliding it out.
- Unplug the charger from the power outlet when charging is complete or if the charger will not be used for an extended period.
Image 4: The Ferm AX-Power 20V Quick Charger with the battery slot ready for battery insertion.
Omtrentlig opladningstider
- For a 2.0 Ah AX-Power 20V Li-ion battery: Approximately 40 minutes.
- For a 4.0 Ah AX-Power 20V Li-ion battery: Approximately 1 hour.
Actual charging times may vary based on battery condition, ambient temperature, and power supply.
6. Vedligeholdelse
Korrekt vedligeholdelse sikrer din opladeres levetid og sikre drift:
- Rensning: Disconnect the charger from the power supply before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or immerse the charger in water.
- Opbevaring: Store the charger in a clean, dry place, away from direct sunlight and extreme temperatures.
- Kabelpleje: Do not wrap the power cable tightly around the charger. Avoid kinking or damaging the cable.
7. Fejlfinding
Hvis du støder på problemer med din oplader, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Charger not powering on / No LED indication | No power supply; Damaged power cable/plug; Faulty outlet. | Check power connection; Try a different outlet; Inspect cable for damage. |
| Battery not charging (Red LED not on) | Battery not properly inserted; Battery is faulty; Battery is not compatible. | Ensure battery is fully seated; Test with a different compatible battery; Verify battery type. |
| Charger or battery gets excessively hot | Poor ventilation; Damaged battery/charger. | Ensure charger is in a well-ventilated area; Discontinue use and contact support if overheating persists. |
If the problem persists after attempting these solutions, please contact Ferm customer support.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Ferm |
| Modelnummer | CDA1175 |
| Input bindtage | 100-240 V |
| Indgangsfrekvens | 50-60 Hz |
| Udgangsstrøm | 2 A |
| Kompatibel batteritype | 20V Li-ion AX-Power Batteries |
| Opladningstid (2.0 Ah) | Ca. 40 minutter |
| Opladningstid (4.0 Ah) | Ca. 1 time |
9. Garanti og support
This Ferm AX-Power 20V Quick Charger typically comes with a 2 års garanti from the date of purchase. Please refer to your purchase receipt or warranty card for specific terms and conditions.
For technical support, warranty claims, or spare parts information, please contact Ferm customer service through their official website or the contact details provided with your product documentation. Keep your proof of purchase for warranty validation.
