1. Introduktion
Thank you for choosing the Ferm AX-Power 20V Fast Charger. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your charger. Please read this manual carefully before use and keep it for future reference.
2. Sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.
- Læs alle instruktioner: Before operating the charger, read and understand all safety warnings and instructions.
- Kun indendørs brug: This charger is designed for indoor use only. Do not expose it to rain or wet conditions.
- Korrekt ventilation: Ensure adequate ventilation around the charger during operation. Do not cover the ventilation slots.
- Kompatible batterier: Only charge Ferm AX-Power 20V Li-Ion batteries with this charger. Attempting to charge other battery types may cause personal injury and damage.
- Damaged charger/cord: Do not operate the charger if the cord or plug is damaged. If the charger is dropped or damaged, have it checked by a qualified service person.
- Tag stikket ud, når det ikke er i brug: Tag altid opladeren ud af stikkontakten, når den ikke er i brug, eller før rengøring.
- Children and unauthorized persons: Keep the charger out of reach of children and unauthorized persons.
- Undgå kortslutninger: Kortslut ikke batteripolerne.
- Temperatur: Oplad ikke batterier i ekstremt varme eller kolde omgivelser. Det optimale opladningstemperaturområde er typisk mellem 0 °C og 40 °C (32 °F og 104 °F).
3. Pakkens indhold
Pakken skal indeholde følgende vare:
- 1 x Ferm AX-Power 20V Fast Charger
Note: Batteries are sold separately and are not included with the charger.
4. Produktfunktioner og komponenter
Figur 4.1: Top view of the charger, showing the battery slot and LED indicators for charging status.
Figur 4.2: Vinklet view of the charger, highlighting the power cord connection.
Figur 4.3: The charger with a Ferm AX-Power 20V battery securely inserted into the charging slot.
Figur 4.4: The retail packaging of the Ferm AX-Power 20V Quick Charger, indicating compatibility and warranty.
The Ferm AX-Power 20V Fast Charger features a robust design with clear LED indicators to monitor the charging status of your AX-Power 20V Li-Ion batteries. It includes a dedicated slot for secure battery insertion and a standard power input for connection to a wall outlet.
5. Opsætning
- Placering: Placer opladeren på en stabil, flad og ikke-brandbar overflade i et godt ventileret område. Sørg for, at den er væk fra direkte sollys, varmekilder og fugt.
- Tilslut til strøm: Insert the charger's power plug into a suitable 100-240V AC, 50-60Hz electrical outlet. The charger's power indicator (if present) may light up.
- Indsæt batteri: Align the Ferm AX-Power 20V Li-Ion battery with the charging slot on the charger. Slide the battery firmly into place until it clicks, ensuring a secure connection.
6. Betjeningsvejledning
6.1 Opladningsproces
Once a compatible battery is correctly inserted and the charger is connected to power, the charging process will begin automatically. The LED indicator on the charger will show the charging status:
- Rød LED: Indikerer, at batteriet oplades.
- Grøn LED: Indikerer, at batteriet er fuldt opladet.
When the green LED illuminates, the battery is fully charged and ready for use. You can then remove the battery from the charger.
6.2 Opladningstider
The charging time depends on the battery's capacity and its current charge level. Approximate charging times are as follows:
- 2.0 Ah Battery: Cirka 40 minutter
- 4.0 Ah Battery: Cirka 1 time
Note: These are approximate times and may vary based on battery condition and ambient temperature.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på din opladere.
- Rensning: Frakobl opladeren fra strømforsyningen før rengøring. Tør opladerens yderside af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the charger in a cool, dry place, away from direct sunlight and moisture, when not in use. Ensure the charger is unplugged and any batteries are removed before storage.
- Inspektion: Periodically inspect the charger, power cord, and plug for any signs of damage. If damage is found, do not use the charger and have it repaired by a qualified technician.
8. Fejlfinding
If you encounter issues with your charger, refer to the following table for common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladeren virker ikke / Ingen LED-indikator | No power supply; Loose connection; Damaged charger/cord. | Check power outlet; Ensure plug is fully inserted; Inspect cord for damage. If damaged, do not use. |
| Battery not charging (Red LED not on) | Battery not properly inserted; Battery is not a Ferm AX-Power 20V Li-Ion battery; Battery is faulty. | Re-insert battery firmly; Ensure battery compatibility; Test with another compatible battery if available. |
| Green LED on, but battery feels low | Battery may be old or degraded. | Battery may need replacement. Consult battery manual for lifespan. |
| Charger or battery gets excessively hot | Poor ventilation; Faulty battery or charger. | Ensure adequate ventilation; Discontinue use immediately and contact support if overheating persists. |
If the problem persists after trying these solutions, please contact Ferm customer support.
9. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | CDA1175 |
| Input bindtage | 100-240V AC, 50-60Hz |
| Udgang Voltage | 20V DC |
| Ladestrøm | 2 Ampere |
| Kompatible batterier | Ferm AX-Power 20V Li-Ion (1.5 Ah, 2.0 Ah, 4.0 Ah) |
| Approx. Charging Time (2.0 Ah) | 40 minutter |
| Approx. Charging Time (4.0 Ah) | 1 time |
| Dimensioner (emballage) | 18.1 x 12.1 x 11.7 cm |
| Vægt | 620 g |
10. Garanti og support
Ferm products are manufactured to high quality standards and are guaranteed for a period of 2 år from the date of purchase against defects in materials and workmanship. This warranty does not cover damage caused by misuse, abuse, neglect, alteration, or unauthorized repair.
For warranty claims, technical support, or spare parts, please contact your local Ferm dealer or visit the official Ferm webwebsted for kontaktoplysninger.
Webwebsted: www.ferm.com (Bemærk: Dette er en pladsholder URL. Please refer to your product packaging or official Ferm documentation for the correct support webwebsted.)
