Indledning
Thank you for choosing the WYBOT Pool Vacuum Robot. This automatic inground pool cleaner is designed to efficiently clean pools up to 100㎡, providing strong suction for a pristine swimming environment. Please read this manual thoroughly before operation to ensure proper use, maintenance, and longevity of your device.
Sikkerhedsinstruktioner
Always follow basic safety precautions when using electrical appliances, especially near water. Failure to do so may result in serious injury or death.
- Brug ikke støvsugeren, når der er mennesker i poolen.
- Sørg for, at opladningsporten er helt tør før opladning.
- Brug kun den originale oplader fra WYBOT.
- Opbevar renseren utilgængeligt for børn.
- Do not attempt to disassemble or repair the cleaner yourself. Contact qualified service personnel.
- Opbevar rengøringsmidlet på et køligt, tørt sted, når det ikke er i brug.
Produktkomponenter
Familiarize yourself with the main components of your WYBOT Pool Vacuum Robot.
Figure 1: WYBOT Pool Vacuum Robot. This image displays the robotic pool cleaner from a slightly elevated angle, highlighting its compact, purple and black design with large wheels and a central control panel on top.
- Hovedenhed: The robotic cleaner body.
- Filterbakke: Collects debris and dirt.
- Opladningsadapter: Til genopladning af det interne batteri.
- Retrieval Hook/Rope: Used to pull the robot out of the pool.
- Justerbare dyser: Control the cleaning path.
Opsætning
1. Første opladning
Before first use, fully charge the robot. The robot is equipped with a 5200 mAh lithium-polymer battery, providing up to 120 minutes of operation on a full charge.
- Locate the charging port on the robot, usually covered by a waterproof cap.
- Ensure the port is completely dry.
- Connect the charging adapter to the robot and then plug it into a power outlet.
- Indikatorlampen viser opladningsstatus (f.eks. rød for opladning, grøn for fuldt opladet).
- Charging typically takes 4-6 hours.
2. Adjusting Cleaning Path
The robot's cleaning path can be adjusted by rotating the nozzles. For round pools, a default setting of 20°/20° is recommended. For larger or rectangular pools, adjusting to 40°/20° may improve coverage.
Figure 2: WYBOT Pool Vacuum Robot Packaging. This image shows the product box, detailing the model number WY1103 and highlighting features such as cordless operation, 6600mAh battery, lightweight design, 120 minutes working time, and adjustable direction.
Betjeningsvejledning
1. Placering af robotten i poolen
- Sørg for, at robotten er fuldt opladet.
- Drej tænd/sluk-knappen til "ON"-positionen.
- Gently lower the robot into the pool. It will slowly fill with water and sink to the bottom.
- Ensure the retrieval rope is floating on the surface and easily accessible.
2. Rengøringscyklus
Once at the bottom, the robot will begin its cleaning cycle, moving in a zigzag pattern. When it encounters a wall, it will automatically reverse direction. The cleaning cycle continues until the battery is depleted or the unit is manually retrieved.
3. Retrieving the Robot
To retrieve the robot, gently pull the retrieval rope until the robot is near the surface. Lift the robot out of the water using its handle. Allow excess water to drain before placing it on a clean surface.
Video 1: Demonstration of the WYBOT Pool Vacuum Robot in operation. This video shows the robot being placed into a pool, sinking, and then moving across the pool floor to clean, demonstrating its automatic navigation and cleaning pattern.
Video 2: Overståetview of the WYBOT Pool Vacuum Robot's features and ease of use. This video highlights the robot's design, how to turn it on, and its cordless operation, emphasizing its convenience for regular pool maintenance.
Opretholdelse
1. Cleaning the Filter Tray
Regularly clean the filter tray to maintain optimal suction performance.
- After each use, remove the robot from the pool.
- Unclip the bottom of the robot to access the filter tray.
- Empty any collected debris (leaves, sand, etc.) from the tray.
- Rinse the filter tray thoroughly with clean water.
- Ensure the filter tray is completely dry before reassembling.
2. Opbevaring
When not in use for extended periods, store the robot in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is fully charged before storage to prolong its lifespan.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Robotten tænder ikke. | Batteriet er lavt eller afladet. | Oplad robotten helt. |
| Robot moves slowly or stops. | Filter tray is full or clogged. | Clean the filter tray. |
| Roboten rengør ikke effektivt. | Filter tray is dirty; nozzles are misaligned. | Clean the filter tray; adjust the nozzles according to pool shape. |
| Robot does not sink. | Air trapped inside. | Gently rock the robot underwater to release trapped air. |
Specifikationer
- Model: WY1103
- Mærke: WYBOT
- Produktdimensioner: 18.2 cm L x 16.7 cm B x 11.7 cm H
- Varens vægt: 13.2 pund
- Strømkilde: Batteridrevet
- Batteritype: 1 lithium-ion batteri (medfølger)
- Lithium batteri energiindhold: 73 wattimer
- Arbejdstid: Op til 120 minutter
- Anbefalet poolstørrelse: Op til 100㎡
- Farve: Pearly White
Garanti og support
WYBOT products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official WYBOT webwebsted.
For further assistance, you may contact WYBOT customer service through their official channels. Please have your model number (WY1103) and purchase details ready.
Note: The product description on some platforms may incorrectly state "WYBOT Battery for Pool Robot". Please be assured that this manual pertains to the WYBOT Pool Vacuum Robot (Model WY1103) itself.
