Beta BW 1256/C21-1 Micro Screwdriver with 21 Inserts - Instruction Manual

Indledning

The Beta BW 1256/C21-1 Micro Screwdriver set is a professional tool designed for precision work. This compact and practical kit includes a bi-material mini screwdriver handle and 21 interchangeable 4 mm inserts, along with a magnetic extension. It is ideal for a wide variety of screws, making it suitable for both professionals and DIY enthusiasts.

The quality of materials used in the Beta Worker range ensures excellent performance, long service life, and high durability, meeting the highest standards of safety, strength, reliability, and ease of use.

Sikkerhedsoplysninger

• Brug altid passende personlige værnemidler, såsom sikkerhedsbriller, når du bruger håndværktøj.
• Ensure the correct insert size and type is selected for the fastener to prevent damage to the fastener or the tool.
• Do not use excessive force. The micro screwdriver is designed for precision tasks, not heavy-duty applications.
• Hold værktøjet rent og fri for fedt eller olie for at opretholde et sikkert greb.
• Store the tool and inserts in their case to prevent loss and damage, and keep out of reach of children.
• Brug ikke skruetrækkeren som brækjern eller mejsel.

Pakkens indhold

The Beta BW 1256/C21-1 set includes the following components:

• 1 x Bi-material Micro Screwdriver Handle
• 21 x Interchangeable 4 mm Inserts, including:
  • Slotted: 1.5 mm, 2.0 mm, 2.5 mm, 3.5 mm
  • Phillips: PH0, PH1
  • Pozidriv: PZ0, PZ1
  • Torx: T4, T5, T6, T7, T8, T10, T15
  • Other precision inserts (0.7, 0.9, 1.3, 5.3 mm)
• 1 x Magnetic Extension
• 1 x Compact Storage Case with Transparent Lid

Image: The Beta BW 1256/C21-1 Micro Screwdriver set, showcasing the handle and the array of 21 precision inserts neatly organized within its transparent-lidded storage case.

Opsætning

1. Åbn sagen: Unlatch and open the transparent lid of the storage case.
2. Select the Correct Insert: Identify the appropriate insert type and size for the screw you intend to work with. Refer to the insert identification table below for guidance.
3. Indsæt i håndtaget: Gently push the selected 4 mm insert into the hexagonal opening at the tip of the micro screwdriver handle. Ensure it is fully seated and secure. The handle features a magnetic tip to hold the insert firmly.
4. Using the Magnetic Extension (Optional): For deeper access or extended reach, first insert the desired bit into the magnetic extension, then insert the extension into the screwdriver handle.

Image: A detailed table illustrating the various types of 4mm inserts included in the Beta BW 1256/C21-1 set, along with their corresponding Beta model numbers and specific sizes (e.g., Slotted, Phillips, Pozidriv, Torx). This helps in identifying the correct bit for different screw heads.

Betjeningsvejledning

Once the correct insert is securely in place, the micro screwdriver is ready for use:

1. Placering: Place the tip of the insert squarely into the head of the screw.
2. Påfør tryk: Apply gentle, consistent downward pressure to keep the insert engaged with the screw head.
3. Rotere: Rotate the screwdriver handle clockwise to tighten or counter-clockwise to loosen the screw. The rotating cap on the handle allows for continuous pressure application with one hand while rotating the handle with the other, providing precise control.
4. Præcisionsarbejde: This tool is ideal for small electronics, eyeglasses, watches, and other delicate applications where fine control is necessary.

Opretholdelse

• Rensning: After each use, wipe down the screwdriver handle and inserts with a clean, dry cloth to remove any dirt, dust, or debris. Avoid using harsh chemicals or abrasive materials.
• Opbevaring: Always return the inserts and handle to their designated slots in the storage case after use. Close the lid securely to protect them from environmental elements and prevent loss.
• Inspektion: Periodically inspect the inserts for signs of wear, such as rounded edges or chipped tips. Worn inserts can damage screw heads and should be replaced if necessary.
• Smøring: No lubrication is required for this tool.

Fejlfinding

If you encounter issues while using your Beta micro screwdriver, consider the following:

• Insert Slipping from Screw Head:
  • Ensure you are using the correct size and type of insert for the screw.
  • Apply adequate downward pressure to keep the insert engaged.
  • Check if the insert tip is worn or damaged; replace if necessary.
• Insert Not Staying in Handle:
  • Verify the insert is fully pushed into the handle.
  • Check if the magnetic tip of the handle is clean and free of debris.
• Difficulty Turning Screw:
  • Ensure the screw is not cross-threaded or seized.
  • For very tight screws, ensure you are applying sufficient, steady pressure.

Specifikationer

Garanti og support

Beta tools are manufactured to high standards of quality and durability. For information regarding warranty coverage, product support, or replacement parts, please refer to the official Beta website or contact Beta customer service directly.

You can often find more information by visiting the Beta Store on Amazon or by searching for "Beta Utensili" online.