Indledning
The Nitecore P20iX is a high-performance tactical flashlight designed for various applications, offering an impressive 4000 lumens maximum output. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your P20iX flashlight to ensure optimal performance and longevity.
It features a USB-C rechargeable design, making it convenient for on-the-go charging. The flashlight is equipped with advanced i-Generation technology for reliable and rapid operation, making it suitable for law enforcement, assault operations, self-defense, search, and patrols.
Figure 1: Nitecore P20iX Flashlight and Included Accessories.
Hvad er inkluderet
Upon unboxing your Nitecore P20iX, please verify that all the following components are present:
- Nitecore P20iX lommelygte
- NL2150i 5000mAh Battery
- NL2150 HPi Rechargeable Battery
- Batterimagasin
- NTH20 Hylster
- USB-C ladekabel
- Snor
- Klip
- Ekstra O-ring
Opsætning
1. Batteriinstallation
- Skru lommelygtens bagdæksel af mod uret.
- Insert the NL2150i 5000mAh battery or NL2150 HPi rechargeable battery with the positive (+) terminal facing towards the head of the flashlight. If using a 18650 battery, place it inside the provided battery magazine before inserting.
- Screw the tail cap back on clockwise until it is securely tightened. Ensure a tight seal to maintain water resistance.
Figure 2: Nitecore P20iX Flashlight Body Overview.
2. Opladning af batteriet
The Nitecore P20iX features a built-in USB-C charging port for convenient recharging of the included 21700 i-Series batteries.
- Find dækslet til USB-C-opladningsporten nær lommelygtens hoved.
- Åbn gummidækslet for at få adgang til USB-C-porten.
- Tilslut den ene ende af det medfølgende USB-C-opladerkabel til lommelygtens port og den anden ende til en USB-strømkilde (f.eks. USB-adapter, computer, powerbank).
- The power indicator light will illuminate to show charging status. Refer to the indicator guide in the operating section for details.
- Once charging is complete, disconnect the cable and securely close the rubber cover to maintain water and dust resistance.
3. Montering af tilbehør
- Snor: Thread the lanyard through the designated hole on the tail cap for secure carrying.
- Klip: The removable clip can be attached to the flashlight body for easy attachment to pockets or gear.
- Holster (NTH20): Insert the flashlight into the NTH20 holster for secure storage and quick access.
Betjeningsvejledning
1. Grundlæggende betjening
- Momentan belysning: Half-press and hold the Tactical Tail Switch (Power Button) for momentary on. Release to turn off.
- Konstant tænd/sluk: Fully press the Tactical Tail Switch until a click is heard to turn the flashlight on. Press again to turn it off.
Figure 3: Tail Cap with Tactical Tail Switch and Mode Button.
2. Brightness Levels and Modes
The P20iX offers multiple brightness levels and a special Strobe mode. The flashlight utilizes four CREE XP-L2 V6 LEDs for powerful illumination.
Figure 4: Quad-Core LED Emitters.
- Ændring af lysstyrke: With the flashlight on, short press the MODE button (located on the tail cap, next to the power button) to cycle through brightness levels (e.g., Ultra-low, Low, Mid, High, Turbo).
- Accessing Strobe Mode:
- From any state (on or off), press and hold the MODE button to instantly activate Strobe mode.
- Release the MODE button to exit Strobe mode.
Figure 5: STROBE READY™ Technology.
3. Strømindikator
The power indicator light, typically located near the charging port or on the tail cap, provides information about the battery status:
- Solid grøn: Batteriniveauet er over 50%.
- Blinkende grønt: Batteriniveauet er under 50 %.
- Fast rød: Battery level is below 10%, indicating a need for recharging.
- Flashing Red (during charging): Opladning i gang.
- Solid Green (during charging): Opladning færdig.
Opretholdelse
- Rensning: Rengør lommelygtens hus regelmæssigt med en blød, tør klud.amp Brug en rengøringsklud til objektivet for at undgå ridser.
- Smøring: Apply a thin layer of silicone grease to the O-rings periodically to maintain water resistance and smooth operation of the tail cap threads. Replace worn O-rings with the spare provided.
- Batteripleje:
- Opbevar batterierne på et køligt, tørt sted, når de ikke er i brug.
- Recharge batteries regularly, even if not fully depleted, to prolong their lifespan.
- If the flashlight will not be used for an extended period, remove the battery to prevent leakage and damage.
- Undgå påvirkning: While durable, avoid dropping the flashlight or subjecting it to severe impacts, which can damage internal components.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lommelygten tænder ikke. |
|
|
| Lyset er svagt eller flimrer. |
|
|
| Lommelygten bliver varm under brug. |
|
|
Specifikationer
| Feature | Detalje |
|---|---|
| Max output | 4,000 lumen |
| Maksimal stråleafstand | 221m |
| Maksimal stråleintensitet | 12,200 cd |
| Max køretid | 350 timer / 14.58 dage |
| LED'er | 4 x CREE XP-L2 V6 LED'er |
| Batteritype | 21700 i-Series (compatible with 18650 via magazine) |
| Særlige tilstande | Strobe |
| Strålefarve | Hvidt lys |
| Længde | 141.5 mm (5.57") |
| Hoveddiameter | 31.8 mm (1.25") |
| Rør diameter | 25.4 mm (1.12") |
| Vægt | 116 g (4.09 oz) |
| Materiale | Aluminium |
| Strømkilde | Batteridrevet |
| Opladningsport | USB-C |
Figure 6: Maximum Output Capability.
Garanti og support
Nitecore products are known for their quality and reliability. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Nitecore webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
For technical support, service, or inquiries regarding your Nitecore P20iX flashlight, please contact Nitecore customer service directly. Contact information can typically be found on the official Nitecore webwebstedet eller på produktemballagen.
You can also visit the Nitecore Store on Amazon for more information: Nitecore Amazon Store.
