AQQA Akvarielys Model GCA-AQ052 Brugsanvisning

1. Produktet er slutview

The AQQA Aquarium Light Model GCA-AQ052 is a full-spectrum LED lighting solution designed for aquariums ranging from 17 to 24 inches. It features 14 adjustable colors, 5 brightness levels, and an integrated timer for automated operation. The light is constructed with a durable aluminum alloy and boasts an IP67 waterproof rating, ensuring longevity and safety in aquatic environments.

Image 1.1: The AQQA Aquarium Light providing illumination to a planted aquarium.

2. Pakkens indhold

Kontroller venligst, at alle komponenter er til stede i pakken:

• AQQA Aquarium Light Unit (Model GCA-AQ052)
• Extendable Mounting Brackets (2x)
• Power Adapter with Controller
• Instruktionsmanual (dette dokument)

3. Opsætningsvejledning

3.1 Montering af lyset

1. Pak forsigtigt alle komponenter ud af kassen.
2. Attach the extendable mounting brackets to each end of the light unit. Ensure they are securely fastened.
3. Place the light unit on top of your aquarium. Adjust the extendable brackets to fit the width of your tank (suitable for 17-24 inch tanks).
4. Ensure the light is stable and centered over the aquarium for even illumination.

Image 3.1: The extendable brackets allow for flexible installation on various tank sizes.

3.2 Strømtilslutning

1. Connect the power adapter cable to the light unit.
2. Sæt strømadapteren i en almindelig stikkontakt.
3. Ensure the power cord is routed safely and away from water to prevent accidental splashes.

4. Betjeningsvejledning

The AQQA Aquarium Light is controlled via an inline remote with several buttons for various functions.

Image 4.1: The inline remote control for managing light settings.

4.1 Tænd/sluk

• Tryk på Power-knap () for at tænde eller slukke lyset.

4.2 Farvejustering

• Tryk på Color Change button () to cycle through 14 different color modes.
• For at aktivere Auto Color Change Mode, tryk på og hold nede Color Change button for approximately 3 seconds. The light will automatically transition between colors.

4.3 Justering af lysstyrke

• Brug Lysstyrke op (+) og Lysstyrke ned (-) knapper til at justere lysstyrken.
• There are 5 adjustable brightness levels, ranging from 10% to 100%.

Image 4.2: Visual representation of the 5-level brightness adjustment.

4.4 Timer funktion

The built-in timer allows for automated lighting cycles.

• Tryk på Timer knap () to select a duration: 3 hours (3H), 6 hours (6H), eller 12 hours (12H).
• Once a timer is set, the light will automatically turn off after the selected duration and will turn on at the same time the next day, repeating the cycle.
• F.eksample, if you activate the 12H timer at 8:00 AM, the light will turn off at 8:00 PM and automatically turn on again at 8:00 AM the following day.

Image 4.3: Timer settings for 3, 6, or 12 hours of operation.

5. Vedligeholdelse

5.1 Rengøring

• Before cleaning, always unplug the light from the power outlet.
• Tør lysenheden af ​​med en blød kludamp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish or waterproof sealing.
• Ensure the light is completely dry before reconnecting it to power.

5.2 Waterproofing Information

• The AQQA Aquarium Light has an IP67 waterproof rating, meaning it is protected against dust and temporary immersion in water (up to 1 meter for 30 minutes).
• Vigtig: This light is designed for placement over the aquarium and is ikke intended for submersible use. Do not immerse the light unit directly into the water.

6. Fejlfinding

If you encounter issues with your AQQA Aquarium Light, please refer to the following common solutions:

• Lyset tænder ikke:
  • Check if the power adapter is securely plugged into both the light unit and the electrical outlet.
  • Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
  • Ensure the power button on the inline remote is pressed.
• Colors or Brightness Not Changing:
  • Sørg for, at fjernbetjeningens knapper trykkes fast ned.
  • If the light is stuck on a specific color or brightness, try unplugging the unit for 30 seconds and then plugging it back in to reset.
• Timerfunktion virker ikke:
  • Confirm that a timer duration (3H, 6H, or 12H) has been selected by pressing the timer button. The corresponding indicator light on the remote should be illuminated.
  • The timer cycle begins from the moment it is set. If you unplug the light, the timer will reset.
• Lysflimren eller funktionsfejl:
  • Disconnect power immediately.
  • Inspect the power cord and light unit for any visible damage.
  • Kontakt kundesupport, hvis problemerne fortsætter.

7. Specifikationer

Image 7.1: Detailed specifications for different AQQA aquarium light models, including the GCA-AQ052.

8. Garantioplysninger

The AQQA Aquarium Light Model GCA-AQ052 comes with a manufacturer warranty for 1 år fra købsdatoenGem venligst din købsbevis i tilfælde af garantikrav.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, unauthorized repair, or failure to follow the instructions in this manual.

9. Kundesupport

For further assistance, technical support, or warranty inquiries, please contact AQQA customer service through the retailer where the product was purchased or visit the official AQQA brand store online.

We are committed to providing quality products and support to our customers.