Brugervejledning til VTOMAN X5 Jump Starter med luftkompressor

Indledning

This manual provides detailed instructions for the safe and effective use of your VTOMAN X5 Jump Starter with Air Compressor. The VTOMAN X5 is a versatile device designed to provide emergency jump-starting capabilities for vehicles, inflate tires, and serve as a portable power bank. Please read this manual thoroughly before operation to ensure proper usage and to maximize the lifespan of your device.

Image: The VTOMAN X5 unit, showcasing its compact design, digital display, and included jumper cables and various inflation nozzles.

Sikkerhedsoplysninger

Your safety is paramount. The VTOMAN X5 is equipped with multiple safety features to protect both the user and the device. Adhere to the following guidelines:

• Always ensure proper connection of jumper cables. The device features an indicator light that will show a reverse red light if connections are incorrect, preventing sparks and damage.
• The unit incorporates comprehensive protection features including: spark-proof, reverse-charge, over-current, over-charge, reverse-polarity, high-temp, low-temp, short-circuit, over-voltage, og overbelastningsbeskyttelse.
• Do not operate the air compressor continuously for extended periods. If the unit becomes excessively hot during inflation, allow it to cool down for several minutes before resuming operation.
• The Type-C port is the kun input charging port. The DC output port is exclusively for powering car products (e.g., vacuum cleaners) and is not a charging input. Use only Type-C cables for charging the X5. Improper charging can lead to safety hazards.
• Hold enheden væk fra vand, fugt og brandfarlige materialer.
• Do not disassemble or attempt to repair the unit yourself. Contact customer support for assistance.
• Store the device in a cool, dry place, out of reach of children.

Billede: En intern view of the VTOMAN X5, illustrating its advanced protection circuitry designed for safe operation.

Image: A visual representation of the ten intelligent safety protections integrated into the VTOMAN X5, including short circuit, reverse polarity, over current, over charge, low temp, high temp, over voltage, over load, spark proof, and reverse charge protection.

Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• 1 x VTOMAN X5 Jump Starter with Air Compressor
• 1 x Smart Jumper kabel
• 1 x USB-A til USB-C-kabel
• 1 x USB-C til USB-C-kabel
• 1 x Opbevaringspose
• 1 x Pump Tube
• 5 x Air Nozzles (various types for different inflatables)
• 1 x Brugermanual (dette dokument)

Image: All components included in the VTOMAN X5 kit, neatly arranged, including the main unit, smart jumper cable, USB cables, pump tube, air nozzles, storage bag, and user manual.

Produktfunktioner og komponenter

The VTOMAN X5 is designed for ease of use and high performance:

• Kraftig jumpstarter: Delivers 3500A peak current, capable of starting 12V vehicles with up to 9L gas or 8L diesel engines. Can provide up to 60 jump starts on a single charge.
• Integreret luftkompressor: 160PSI digital air compressor can inflate a typical car tire to 20 PSI in approximately 2 minutes. Features real-time tire pressure detection and auto shut-off.
• Large 5.1-inch Smart Screen: Provides clear display of battery level, inflator mode, inflate volume, and tire pressure in PSI, BAR, or KPA units.
• Multifunktionelt LED-lys: A 400-lumen LED light with three modes: Normal, Strobe, and SOS, useful for emergencies and illumination. Can function as a warning triangle.
• Power Bank funktionalitet: Equipped with USB-C input (18W fast charging), USB-C output (5V/3A, 9V/2A, 12V/1.5A), and a DC output (15V/10A) for powering other devices.
• Avanceret termisk design: Features a honeycomb heat dissipation design to prevent overheating and ensure optimal performance in extreme temperatures (-4℉ to 140℉).

Billede: En detaljeret view of the VTOMAN X5's intelligent 5.1-inch screen, showing its clear digital display for various functions.

Image: The VTOMAN X5 positioned on a road, demonstrating its use as a warning triangle with its bright LED light for roadside emergencies.

Opsætning

Indledende opladning

Before first use, fully charge your VTOMAN X5.

1. Locate the USB-C input port on the device.
2. Connect the provided USB-C to USB-C cable (or USB-A to USB-C cable with a compatible adapter) to the input port.
3. Plug the other end of the cable into a suitable USB wall charger (not included).
4. The screen will indicate charging status. Charge until the battery indicator shows full.

Note: The X5 supports 18W fast charging. A full charge can take several hours depending on the charger's output. The device can hold a charge for up to 24 months in standby.

Image: Instructions on how to charge the VTOMAN X5 using its Type-C input port, emphasizing that the DC output is not for charging.

Betjeningsvejledning

Hopstart af et køretøj

Følg disse trin for at starte dit køretøj sikkert med startkabler:

1. Indsæt: Plug the smart jumper cable into the jump starter's port. Ensure it is fully inserted.
2. Forbinde: Sæt den røde clamp til den positive (+) pol på dit køretøjs batteri og den sorte terminalamp to the negative (-) terminal. The smart cable indicator light will turn green if connected correctly. If it shows a red light, check your connections.
3. Use Boost Function (if needed): If your car battery is completely dead or too low for the jump starter to detect, press the "BOOST" button on the smart cable.
4. Start dit køretøj: Once the indicator is green, start your vehicle's engine.
5. Detach & Go: Fjern straks jumperen efter motorstart.amps from the car battery, then disconnect the smart cable from the jump starter.

Image: The VTOMAN X5 connected to a car battery, illustrating its 3500A jump-starting capability for various engine sizes.

Image: A four-step visual guide demonstrating the process of jump starting a vehicle using the VTOMAN X5, from inserting the cable to starting the engine.

Inflating Tires and Other Inflatables

The integrated air compressor can inflate tires, balls, and other items:

1. Assemble the tube: Screw the pump tube onto the inflation port of the X5.
2. Connect the tube: Attach the appropriate air nozzle to the pump tube and connect it securely to the item you wish to inflate (e.g., tire valve stem).
3. Adjust the inflation mode: Use the controls on the X5's screen to select the desired inflation mode (car, motorcycle, bicycle, ball) and set the target pressure (PSI, BAR, or KPA).
4. Press the power button to start work: Press the power button to begin inflation. The compressor will automatically stop once the preset pressure is reached.

Note: The X5 can inflate a typical car tire (0 to 20 PSI) in approximately 2 minutes.

Image: The VTOMAN X5 actively inflating a car tire, showcasing its 160 PSI cordless tire inflator function and quick inflation time.

Image: A four-step visual guide detailing how to inflate items using the VTOMAN X5, from assembling the tube to starting the inflation process.

Billede: Eksamples of versatile usage for the VTOMAN X5's air compressor, including car tires, bicycle tires, basketballs, and inflatable pool floats.

Bruges som powerbank

The VTOMAN X5 can charge your electronic devices:

• Connect your device's charging cable to the USB-C output or USB-A output port on the X5.
• The X5 will automatically begin charging your device.
• The DC output port (15V/10A) is designed for powering 12V car accessories, such as car vacuum cleaners or portable refrigerators.

Image: The VTOMAN X5 connected via USB-C to a laptop, demonstrating its capability to charge various electronic devices.

Image: The VTOMAN X5 shown alongside various electronic devices (tablet, phone, earbuds, smartwatch), indicating its use as a portable power bank.

Brug af LED-lys

The built-in LED light has three modes:

• Tryk på lysknappen én gang for Normal belysning.
• Tryk igen for Strobe mode.
• Tryk en tredje gang for SOS signaltilstand.
• Tryk en fjerde gang for at slukke lyset.

Opretholdelse

• Genopladning: For optimal battery health, recharge the X5 every 3-6 months, even if not in use. The device has a standby time of up to 24 months.
• Rensning: Tør enheden af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Opbevaring: Store the device in a cool, dry environment, away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
• Termisk styring: The X5 features a honeycomb heat dissipation design. Ensure the ventilation areas are not blocked during operation, especially when using the air compressor.

Image: A close-up of the VTOMAN X5's honeycomb heat dissipation design, which enhances safety and extends service life.

Fejlfinding

If you encounter issues with your VTOMAN X5, refer to the following common problems and solutions:

Specifikationer

Garanti og support

VTOMAN stands behind the quality of its products.

• Garanti: Your VTOMAN X5 comes with a 24 måneders garanti fra købsdatoen.
• Penge-tilbage-garanti: A 30-day money-back guarantee is offered for any reason.
• Teknisk support: Livstids teknisk support er tilgængelig.
• Kundeservice: For any questions or assistance, please contact VTOMAN customer service. They aim to provide quick replies within 24 hours.
• Support telefon: 1-888-818-9811 (US Mon. - Fri. 9 a.m. - 5 p.m. PST)