CipherLab RK25 UHF RFID-læser og -skriver brugermanual

1. Introduktion

This manual provides essential instructions for the proper setup, operation, and maintenance of your CipherLab RK25 UHF RFID Reader Writer. The RK25 is a versatile mobile computer designed for data collection, featuring a 2D imager, NFC, and optional UHF RFID capabilities. It operates on Android 7.0, 9.0, or 11.0 with GMS, offering robust performance for various industrial applications.

Figure 1: CipherLab RK25 device with attached UHF RFID reader, displaying the Android home screen.

2. Opsætning

2.1. Batteriinstallation

1. Locate the battery compartment on the rear of the RK25 handheld unit.
2. Press the latch to release the battery cover.
3. Insert the 3.8V, 4000 mAh Li-Polymer battery, ensuring the contacts align correctly.
4. Luk batteridækslet, indtil det klikker sikkert på plads.

Note: Battery replacement is designed for quick execution, typically taking only 2 steps and 3 seconds.

Figure 2: Key features diagram, including battery compartment.

2.2. Opladning af enheden

Before initial use, fully charge the RK25 device. Use the provided charging cradle or USB cable. A full charge typically provides a minimum of 8 hours of operation with the 2D imager.

2.3. Tænd/sluk

• To power on: Press and hold the power button until the CipherLab logo appears.
• Sådan slukker du: Tryk på tænd/sluk-knappen og hold den nede, og vælg derefter 'Sluk' fra indstillingerne.

2.4. Attaching the UHF RFID Reader

The RK25 UHF RFID reader module can be easily attached to the RK25 handheld unit. Align the 8-pin electrical connection and secure the module firmly.

Figure 3: User holding the RK25 with UHF RFID reader attached.

3. Betjeningsvejledning

3.1. Keypad and Touchscreen Navigation

The RK25 features a 4-inch WVGA (480x800) touch display and a physical keypad. Models are available with either a 25-key keypad (2 function keys) or a 28-key keypad (4 function keys) to suit specific application needs. Use the touchscreen for intuitive navigation through the Android interface and the physical keys for data entry and dedicated functions.

Figur 4: Forside view of the RK25 handheld unit, showing screen and keypad.

3.2. Barcode Scanning (2D Imager)

The integrated 2D imager supports reading 1D and 2D barcodes. It offers a reading range of up to 4 meters. The scanning angle can be set to 10° or 70° (70° by request) for optimal on-screen data checking and comfortable scanning.

• Ret scannervinduet mod stregkoden.
• Press the trigger button (typically yellow) to activate the scanner.
• Ensure the barcode is within the aiming pattern for a successful read.

3.3. UHF RFID Reading

When the UHF RFID reader module is attached, the RK25 can read EPC Class1 Gen2 V2 RFID tags. The circularly polarized antenna provides a read range of 8+ meters (26+ ft) and a fast read rate of over 700 tags i sekundet.

• Ensure the UHF RFID reader module is securely attached and powered on.
• Point the antenna towards the RFID tags.
• Activate the RFID reading function via the device's software interface.

3.4. NFC-funktionalitet

The RK25 supports NFC (Near Field Communication) at 13.56 MHz, compatible with ISO14443 Type A, B, and ISO15693 standards. It supports Peer-to-Peer, Card Reader, and Card Emulation modes.

• Enable NFC in the device settings.
• Tap the device near an NFC tag or another NFC-enabled device to initiate communication.

3.5. Kamerabrug

The device includes an 8-megapixel autofocus camera with an LED flash for image capture.

• Open the camera application from the Android home screen.
• Frame your subject and tap the screen to focus, then press the capture button.

3.6. Trådløs kommunikation

The RK25 supports various wireless communication methods:

• WLAN: IEEE 802.11 a/b/g/n/ac/d/h/i/k/r/e for Wi-Fi connectivity.
• WPAN: Bluetooth Class II, V4.0/V4.1/V4.2 BLE, V2.1 with EDR for short-range device pairing.
• WWAN: GSM, TD-SCDMA, WCDMA, TDD-LTE, and FDD-LTE bands for cellular connectivity.
• GPS: Integrated GPS, Galileo, GLONASS, BeiDou, and AGPS for location services.

4. Vedligeholdelse

4.1. Rengøringsvejledning

• Brug en blød, fnugfri klud lidt dampened with water or a mild cleaning solution to clean the device''s exterior.
• Brug ikke skrappe kemikalier, slibemidler eller opløsningsmidler.
• Brug et skærmspecifikt rengøringsmiddel og en mikrofiberklud til skærmen.

4.2. Batteripleje

• Undgå at udsætte batteriet for ekstreme temperaturer.
• Du må ikke punktere eller skille batteriet ad.
• Genbrug brugte batterier i henhold til lokale regler.

4.3. Robusthed og holdbarhed

The RK25 is designed for demanding environments, featuring an IP65 rating for dust and water resistance. It can withstand multiple drops of 1.5 m (5 ft) onto concrete, and up to 1.8 m (6 ft) with an optional rubber boot, meeting MIL-STD-810G standards. It also endures 300 tumbles at 0.5 m.

5. Fejlfinding

This section addresses common issues you might encounter with your CipherLab RK25.

5.1. Enheden tændes ikke

• Sørg for, at batteriet er korrekt installeret og fuldt opladet.
• Tilslut enheden til opladeren, og prøv at tænde den.
• If the issue persists, try a different battery if available.

5.2. Problemer med stregkodescanning

• Verify that the barcode is clean and undamaged.
• Ensure the scanner window is clean and free of obstructions.
• Check the scanning application settings to confirm the correct barcode symbologies are enabled.
• Juster afstanden og vinklen mellem scanneren og stregkoden.

5.3. UHF RFID Reading Problems

• Confirm the UHF RFID reader module is securely attached and enabled.
• Sørg for RFID tags are within the optimal read range and orientation.
• Check for potential interference from other electronic devices or metallic objects.

5.4. Connectivity Issues (Wi-Fi/Bluetooth/WWAN)

• Verify that the respective wireless communication feature is enabled in the device settings.
• For Wi-Fi skal du sørge for, at du er inden for rækkevidde af et kendt netværk og har indtastet den korrekte adgangskode.
• For Bluetooth, ensure the pairing device is in discovery mode and within range.
• For WWAN, check SIM card installation and cellular network coverage.

6. Specifikationer

The following table details the technical specifications for the CipherLab RK25 and its UHF RFID reader attachment.

Figure 5: Detailed technical specifications for the RK25 series.

7. Garanti og support

7.1. Producentgaranti

CipherLab products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official CipherLab webwebstedet for detaljerede garantivilkår og -betingelser, der er specifikke for din region.

7.2. Teknisk support

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact CipherLab customer support. Contact information can typically be found on the CipherLab webwebsted eller i produktemballagen.

You may also find useful resources, software development kits (SDKs), and configuration tools on the official CipherLab support portal.