1. Introduktion
Thank you for choosing the Behringer Space FX Multi-effects Eurorack Module. This 24-bit stereo multi-effects engine module is designed to integrate seamlessly into your Eurorack system, offering a wide array of sonic possibilities. It features 32 effect algorithms, including 8 modulation effects and 15 reverb effects, along with tap syncing capabilities and an intuitive LCD display for easy navigation and parameter adjustment. This manual provides essential information for the safe and effective operation of your Space FX module.
2. Vigtige sikkerhedsinstruktioner
- Read these instructions thoroughly before operation.
- Gem disse instruktioner til fremtidig reference.
- Overhold alle advarsler på produktet og i denne manual.
- Følg alle instruktioner.
- Brug ikke dette apparat i nærheden af vand.
- Rengør kun med en tør klud.
- Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
- Må ikke installeres i nærheden af varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
- Brug kun tilbehør/tilbehør specificeret af producenten.
- Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde.
- This module is designed for Eurorack systems. Ensure proper power supply and module orientation before installation.
3. Produktet er slutview
The Behringer Space FX module provides a versatile effects processing solution for your modular synthesizer setup. Its compact design and comprehensive feature set make it an essential tool for sound design and performance.
3.1 Frontpanelets layout
Figur 3.1: Front view of the Behringer Space FX module, showing the LCD display, control knobs, and input/output jacks.
The front panel of the Space FX module is designed for intuitive control. It features an LCD display for effect selection and parameter viewing, two rotary encoders for parameter adjustment (Parameter 1/2 and Program/Value), an FX Send knob to control the wet/dry mix, and an Input Level switch (High/Low). Input and output jacks are clearly labeled for Left (L) and Right (R) channels, with a mono input option.
Figur 3.2: Vinklet view of the Behringer Space FX module, highlighting its compact Eurorack form factor.
Denne vinklede view demonstrates the module's physical dimensions and how it would sit within a Eurorack case. The module occupies 14HP of space.
Figur 3.3: Close-up of the LCD display, showing an effect name such as 'BRIGHT'.
The LCD display provides clear feedback on the currently selected effect program and its parameters, making it easy to navigate through the 32 available algorithms.
3.2 Nøglefunktioner
- 14HP Eurorack Multi-effects Module with 32 Effect Algorithms
- Includes 8 Modulation Effects and 15 Reverb Effects
- Tap Syncing capability for tempo-synced effects
- Intuitive LCD Display for easy navigation
- 24-bit Stereo Multi-Effects Engine
- Flexible input/output options for mono and stereo signals
4. Opsætning
4.1 Strømtilslutning
The Space FX module requires a standard Eurorack power supply. Ensure your Eurorack case provides sufficient power (+12V, -12V, +5V if applicable) and that the power cable is connected correctly to the module's power header. Always align the red stripe on the ribbon cable with the -12V pin on both the module and the power bus board to prevent damage.
4.2 Installation in Eurorack Case
The module is 14HP wide. Carefully align the module with the rail screws in your Eurorack case. Secure the module using the provided screws, ensuring it is firmly seated but not overtightened.
Figur 4.1: Example of Eurorack case rails where the module will be installed.
Proper installation ensures stable operation and prevents accidental disconnections.
4.3 Lydforbindelser
- Inputs (L/R): Connect your audio source (e.g., synthesizer output, mixer send) to the Left (L) and Right (R) 1/4-inch input jacks. For mono signals, connect to the Left (L) input.
- Outputs (L/R): Connect the Left (L) and Right (R) 1/4-inch output jacks to your mixer, audio interface, or subsequent Eurorack modules.
- Indgangsniveaukontakt: Adjust the switch between HIGH and LOW depending on the input signal level to prevent clipping or ensure sufficient gain.
5. Betjeningsvejledning
5.1 Selecting Effects
Drej på PROGRAM / VÆRDI rotary encoder to scroll through the 32 available effect algorithms. The selected effect name will be displayed on the LCD screen.
5.2 Justering af parametre
- PARAMETER 1/2: This rotary encoder adjusts the first two parameters of the selected effect. The specific function of these parameters varies depending on the effect algorithm.
- PARAMETER 3 (TAP): This rotary encoder adjusts the third parameter of the selected effect. For time-based effects like delay, pressing this knob allows for tap tempo input.
Figur 5.1: Detail of the Parameter 3 (TAP) control, used for adjusting the third effect parameter and for tap tempo input.
The tap tempo function is particularly useful for synchronizing delays and other rhythmic effects with your music.
5.3 FX Send Control
De FX SEND knob controls the wet/dry mix of the effect. Turn it clockwise to increase the amount of effect applied to the signal, and counter-clockwise to reduce it. Turning it fully counter-clockwise will bypass the effect.
5.4 Effect Algorithms
The Space FX module includes a diverse range of effects. Experiment with different algorithms and parameter settings to discover new sonic textures. The 32 algorithms include various reverbs, delays, choruses, flangers, phasers, and more.
6. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the module's surface. Do not use abrasive cleaners or solvents.
- Opbevaring: When not in use for extended periods, store the module in a dry, dust-free environment. If removed from a Eurorack case, consider using an anti-static bag.
- Firmwareopdateringer: Check the Behringer official website periodically for any available firmware updates that may enhance performance or add new features. Follow the instructions provided with the update carefully.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No power/LCD not lighting up | Incorrect power cable connection; insufficient power from Eurorack case. | Check power cable orientation (red stripe to -12V). Ensure your Eurorack power supply is adequate and functioning. |
| No sound or very low output | Incorrect input/output connections; FX SEND knob set to OFF; Input Level switch incorrect. | Verify audio cables are connected to the correct input/output jacks. Turn the FX SEND knob clockwise. Adjust the Input Level switch (HIGH/LOW) to match your source signal. |
| Forvrænget lyd | Input signal too hot; output signal too hot. | Switch the Input Level to LOW. Reduce the input signal level from your source. Lower the FX SEND amount. Reduce the gain on the receiving module/mixer. |
| Effects are too subtle | FX SEND knob not high enough; specific effect parameters set too low. | Increase the FX SEND knob. Adjust PARAMETER 1/2 and PARAMETER 3 knobs to increase effect intensity. Consider patching the output back into the input for a more pronounced effect (mono only). |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Model | SPACE FX |
| Type | Multi-effects Eurorack Module |
| Effect Algorithms | 32 (including 8 Modulation, 15 Reverb) |
| Lydopløsning | 24-bit Stereo |
| Modulbredde | 14 HK |
| Dimensioner (H x B x D) | 6.88 x 4.05 x 3 tommer (ca. 17.48 x 10.29 x 7.62 cm) |
| Vægt | 4.6 ounces (ca. 0.13 kg) |
| Hardware-interface | 6,3 mm lydstik |
| Signalformat | Digital |
| Strømkilde | Eurorack (Corded Electric) |
| Voltage | 12 Volts (Eurorack standard) |
| Ampslette | 50 mioamps |
| Oprindelsesland | Kina |
9. Garanti og support
For detaljerede garantioplysninger og teknisk support henvises til den officielle Behringer-brochure. webwebstedet eller kontakt deres kundeservice. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
Online ressourcer: For the latest drivers, manuals, and software, visit www.behringer.com.
