1. Introduktion
This manual provides essential information for the safe and efficient operation of your Enel X JuiceBox 40 Amp Electric Vehicle (EV) Charging Station. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage or injury.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsretningslinjer:
- Ensure professional installation by a qualified electrician.
- Do not attempt to open or modify the JuiceBox unit.
- Keep the charging station away from flammable materials and liquids.
- Do not use the JuiceBox if it appears damaged or if the charging cable is frayed.
- Følg altid lokale elektriske forskrifter og regler.
3. Hvad er der i æsken
Ved udpakning skal du kontrollere, at alle komponenter er til stede:
- 1 x Enel X JuiceBox 40 Amp EV ladestation
- 1 x USB-kabel
- Installation Hardware (if applicable, refer to separate installation guide)
4. Opsætning og installation
The Enel X JuiceBox 40 Amp is designed for wall mounting. Professional installation is highly recommended.
4.1 Montering
Identify a suitable location for wall mounting, ensuring it is close to your vehicle's parking spot and a dedicated 240 Volt electrical circuit. Use the provided mounting template and hardware to securely attach the JuiceBox to a sturdy wall surface.
Figure 1: Enel X JuiceBox 40 Amp EV charging station with smartphone app interface. The image shows the compact wall-mounted unit with its integrated cable management, alongside a mobile phone screen displaying real-time charging data, including current charge level and estimated completion time.
4.2 Elektrisk tilslutning
Connect the JuiceBox to a dedicated 240 Volt circuit. This step requires a qualified electrician to ensure compliance with all electrical codes and safety standards.
4.3 Wi-Fi-forbindelse
Once powered, the JuiceBox can be connected to your home Wi-Fi network. Download the Enel X Way app (compatible with Smartphones and Monitors) from your device's app store. Follow the in-app instructions to pair your JuiceBox with your account and network for smart charging features and remote control.
5. Betjeningsvejledning
5.1 Initiating a Charge
- Sørg for, at dit køretøj er parkeret og slukket.
- Åbn din bils opladningsport.
- Plug the JuiceBox charging connector firmly into your vehicle's charging port.
- The JuiceBox will automatically begin charging. The LED indicator on the unit will change to indicate charging status.
5.2 Using the Enel X Way App
The Enel X Way app provides advanced control and monitoring capabilities:
- Monitor opladningsstatus: View real-time charging progress, energy delivered, and estimated time to full charge.
- Planlæg opladning: Indstil specifikke tidspunkter for opladning for at tage fremskridttage af elpriser uden for spidsbelastningsperioder.
- Tilpasse Ampalder: Control the charging current (up to 40 Amps) to match your vehicle's capabilities or home electrical capacity.
- Hurtig opladning: Utilize the fast charging feature for quicker power delivery when needed.
- Meddelelser: Receive alerts for charging start/stop, interruptions, and completion.
5.3 Ending a Charge
To stop charging, either unplug the connector from your vehicle or use the Enel X Way app to end the session. Always return the charging cable to its holder on the JuiceBox unit after use.
6. Vedligeholdelse
The Enel X JuiceBox requires minimal maintenance:
- Rensning: Tør jævnligt enhedens yderside af med en blød, tør klud.amp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Kabelinspektion: Regularly inspect the charging cable and connector for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately and contact support.
- Ventilation: Ensure the area around the JuiceBox is clear to allow for proper ventilation.
7. Fejlfinding
Se tabellen nedenfor for almindelige problemer og løsninger på disse:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| JuiceBox not powering on. | No power from circuit; tripped breaker. | Check circuit breaker. Ensure proper electrical connection. Contact electrician if issue persists. |
| Opladningen starter ikke. | Cable not fully inserted; vehicle not ready to charge; app settings. | Ensure cable is securely plugged into vehicle. Check vehicle's charging settings. Verify app schedule or settings. |
| Problemer med Wi-Fi-forbindelse. | Forkert Wi-Fi-adgangskode; router for langt væk; netværksforstyrrelser. | Re-enter Wi-Fi password in app. Move router closer or use a Wi-Fi extender. Check for network congestion. |
| Langsom opladning. | App amperage setting; vehicle limitation; shared circuit. | Check amperage setting in Enel X Way app. Confirm vehicle's maximum charging rate. Ensure JuiceBox is on a dedicated circuit. |
If you encounter issues not listed here or require further assistance, please contact Enel X customer support.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Enel X |
| Model | Juicebox 40 amp |
| Ampslette | 40 Amps |
| Input bindtage | 240 volt |
| Monteringstype | Vægmontering |
| Forbindelsesteknologi | Wi-Fi |
| Connector Type | Auxiliary (Standard EV Connector) |
| Kompatible enheder | Monitors, Smartphones |
| Speciel funktion | Hurtig opladning |
| Inkluderede komponenter | 1 x JuiceBox, 1 x USB Cable |
| Pakkedimensioner | 23 x 14.9 x 10.5 tommer |
| Varens vægt | 17.51 pund |
| Dato først tilgængelig | 8. april 2023 |
9. Garantioplysninger
Enel X provides a limited warranty for the JuiceBox 40 Amp EV Charging Station. For detailed warranty terms and conditions, including coverage period and exclusions, please refer to the warranty card included with your product or visit the official Enel X webwebsted. Gem din købsbevis til garantikrav.
10. Kundesupport
For technical assistance, troubleshooting, or general inquiries regarding your Enel X JuiceBox 40 Amp, please contact Enel X customer support:
- Webwebsted: Visit the official Enel X webwebsted for ofte stillede spørgsmål og supportressourcer.
- Telefon: Refer to the contact information provided on the product packaging or the Enel X webwebsted.
- E-mail: Use the contact form or email address available on the Enel X support page.
When contacting support, please have your product model (Juicebox 40 amp) and serial number ready.
