TAB Cordless Spot Cleaner H6-1 User Manual

1. Introduktion

Thank you for choosing the TAB Cordless Spot Cleaner H6-1. This powerful and portable device is designed for efficient spot cleaning on various surfaces, including carpets, upholstery, and car interiors. Its cordless design offers unparalleled convenience, allowing you to tackle spills and stains quickly and effectively. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

Image: The TAB Cordless Spot Cleaner H6-1, showcasing dens kompakte og ergonomiske design.

2. Hvad er der i æsken

Kontroller venligst indholdet af din pakke for at sikre, at alle varer er til stede:

• TAB Cordless Spot Cleaner H6-1 Main Unit
• Extended Hose Attachment
• Opladningskabel/adapter
• Brugermanual

3. Opsætning og montering

Follow these steps to prepare your spot cleaner for first use:

1. Oplad batteriet: Before initial use, fully charge the device. Connect the charging cable to the cleaner and plug it into a power outlet. The LED display will indicate charging status. A full charge provides approximately 20 minutes of runtime.


Image: The cordless spot cleaner being used, highlighting its rechargeable nature and 20-minute run time.

2. Fyld rentvandstanken: Locate the clean water tank (350ml capacity). Remove it from the main unit and fill it with clean water and a suitable cleaning solution (if desired, follow solution manufacturer's instructions). Do not overfill. Reattach the tank securely.
3. Attach the Extended Hose (Optional): For hard-to-reach areas or specific cleaning tasks, attach the extended hose to the designated port on the main unit. Ensure it clicks into place firmly.


Image: A user demonstrating the extended hose design, allowing for cleaning in various locations like curtains.

4. Understand the LED Display: Familiarize yourself with the LED display, which shows battery level and other indicators.


Image: Close-up of the LED display on the cleaner, indicating battery percentage and controls like spray and power brush.

4. Betjeningsvejledning

Before cleaning, always test the cleaning solution on an inconspicuous area of the surface to be cleaned to ensure colorfastness.

1. Tænd: Press the power button to turn on the cleaner. The LED display will illuminate.
2. Forbehandling (valgfrit): For tough stains, you may pre-treat the area with a suitable cleaning solution according to the solution's instructions.
3. Sprayopløsning: Press the spray button to dispense cleaning solution onto the stained area. Allow the solution to penetrate for a few moments.
4. Scrub and Suction: Move the cleaning head over the stained area, applying gentle pressure. The integrated power brush will agitate the stain, while the strong suction power will lift the dirty solution and debris into the dirty water tank.


Image: The spot cleaner in action on a carpet, demonstrating its strong suction power to remove liquid and debris.



Image: An illustration of the automatic power brush mechanism, designed for high-speed washing and improved cleaning.

5. Gentag om nødvendigt: For stubborn stains, repeat the spray, scrub, and suction process until the stain is removed.


Image: The spot cleaner effectively removing a pet stain from a carpet, illustrating its quick and efficient cleaning capability.

6. Sluk: Når rengøringen er færdig, skal du trykke på tænd/sluk-knappen for at slukke enheden.

5. Vedligeholdelse og rengøring

Regular maintenance ensures optimal performance and extends the life of your spot cleaner.

1. Tøm og rengør beholderen for snavset vand: After each use, or when the dirty water tank (260ml capacity) reaches its maximum fill line, remove it from the unit and empty the contents. Rinse the tank thoroughly with clean water.
2. Rengør ren vandtank: Skyl den rene vandtank regelmæssigt for at forhindre ophobning af rester.


Image: Diagram showing the removable dual water tank system, with separate tanks for clean water (350ml) and dirty water (260ml).

3. Clean the Cleaning Head/Brush: Remove any hair, fibers, or debris from the power brush and suction nozzle. You may use a damp klud til at tørre enhedens ydre af.
4. Opbevar korrekt: Store the cleaner in a cool, dry place away from direct sunlight and extreme temperatures. Ensure both tanks are empty and dry before storage.

6. Fejlfinding

If you encounter issues with your TAB Cordless Spot Cleaner, refer to the following common problems and solutions:

Hvis problemet fortsætter efter at have prøvet disse løsninger, bedes du kontakte kundesupport.

7. Specifikationer

8. Garanti og support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official TAB webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For yderligere assistance kan du også kontakte den forhandler, hvor du købte produktet.