YWLRONG Loud Speaker Replacement Instruction Manual

1. Introduktion

This manual provides detailed instructions for replacing the loud speaker in compatible Samsung Galaxy smartphone models using the YWLRONG Loud Speaker Replacement kit. It includes information on product compatibility, package contents, installation procedures, troubleshooting common issues, and product specifications. Please read this manual thoroughly before attempting any repair.

2. Kompatibilitet

This YWLRONG loud speaker replacement is compatible with the following Samsung Galaxy smartphone models:

• Samsung Galaxy A12
• Samsung Galaxy A22
• Samsung Galaxy J4+
• Samsung Galaxy J6+
• Samsung Galaxy M10
• Samsung Galaxy M12
• Samsung Galaxy M20
• Samsung Galaxy M21
• Samsung Galaxy M30
• Samsung Galaxy M31

Vigtig: Please verify your phone's model number before purchasing and attempting installation to ensure compatibility. This part replaces the bottom loud speaker, not the top earpiece speaker.

Image: Compatibility chart for Samsung Galaxy models. This image visually confirms compatibility with Samsung Galaxy A12, A22, J4+, and J6+, while also showing non-compatible models like A13, A14, A22 5G, A23, and J6.

Image: Diagram illustrating the difference between the top earpiece (microphone) and the bottom loud speaker on a smartphone. The earpiece is for calls, located at the top, while the loud speaker is for music and media, located at the bottom.

3. Hvad er der i æsken

Your YWLRONG Loud Speaker Replacement kit includes the following items:

• 1x Loud Speaker Replacement Module
• 1x Set of Repair Tools (various screwdrivers, prying tools, suction cup, SIM ejector pin)

Image: The kit contents, showing one loud speaker module and a set of repair tools, including screwdrivers, prying tools, and a suction cup. An example of using a screwdriver to open a phone is also shown.

4. Installationsvejledning

Replacing a smartphone loud speaker requires careful handling of delicate components. It is recommended that this procedure be performed by individuals with prior experience in phone repair. If you lack experience, consider seeking professional assistance.

4.1. Før du begynder

• Sluk: Ensure your device is completely powered off before starting the repair.
• Saml værktøjer: Have all included repair tools readily available.
• Arbejdsområde: Arbejd i et rent, godt oplyst og statisk-frit miljø.
• Reference Guides: It is highly recommended to find a specific disassembly guide or video for your exact Samsung Galaxy model online (e.g., on YouTube or iFixit).

4.2. General Installation Steps (May vary by model)

1. Fjern SIM-bakken: Brug SIM-udkasterværktøjet til at fjerne SIM-kortbakken.
2. Åbn bagcoveret: Carefully heat the edges of the phone's back cover (if glued) and use prying tools to separate it from the frame. Some models may require removing screws first.
3. Afbryd batteriet: Locate and disconnect the battery flex cable to prevent short circuits during the repair.
4. Locate Loud Speaker: Identify the loud speaker module, typically located at the bottom of the phone. It is usually secured by screws and connected via a small flex cable or contact pins.
5. Remove Old Speaker: Unscrew any retaining screws and carefully disconnect the old loud speaker module. Use prying tools if necessary.
6. Install New Speaker: Place the new YWLRONG loud speaker module into position, ensuring it aligns correctly with the contact points or flex cable connector. Secure it with the screws.
7. Gentilslut batteri: Tilslut batteriets flexkabel igen.
8. Saml telefonen igen: Carefully reattach the back cover, ensuring all clips or adhesive are properly seated. Reinsert the SIM tray.
9. Test funktionalitet: Power on the phone and test the loud speaker by playing music, videos, or making a call on speakerphone.

Note: If you encounter resistance or difficulty at any step, do not force components. Refer to a model-specific guide or seek professional help.

5. Fejlfinding

If you experience issues after replacing the loud speaker, consider the following:

5.1. Common Speaker Failure Symptoms

The following issues indicate a potential loud speaker failure that this replacement part is designed to address:

• Ingen lyd: The phone produces no sound during media playback, ringtones, or speakerphone calls.
• Low Voice/Volume: Sound output is very quiet, even at maximum volume settings.
• Poor Quality/Distortion: Sound is crackling, muffled, or distorted.
• Støj: Unwanted static or buzzing sounds are present.

Image: A visual representation of common problems caused by speaker failure, including 'Noiseless', 'Low Voice', 'Poor Quality', 'Distortion', and 'Noise'.

5.2. Post-Installation Issues

If the loud speaker still does not function correctly after replacement, it may indicate that the issue is not with the speaker itself. Please check the following:

• Tail Plug Board or Flat Cable Damage: Inspect the tail plug board (charging port flex cable) and any associated flat cables for signs of damage, tears, or improper connection. These components often carry the audio signal to the loud speaker.
• Speaker Contact Points: Ensure the new loud speaker's contact points are clean and making proper, firm contact with the corresponding points on the phone's main board or flex cable.
• Problem med hovedkortet: In rare cases, the audio IC or other components on the phone's main logic board may be faulty. This typically requires professional diagnosis and repair.

Image: This image illustrates troubleshooting steps if the speaker issue persists after replacement. It advises checking the tail plug board or flat cable for damage and ensuring the horn contact points connect properly to the small board or flat cable.

6. Specifikationer

7. Garanti og support

Garanti: This product comes with a 60-day free exchange policy for non-human damages.

Kundesupport: If you require assistance with installation, troubleshooting, or have any questions regarding the product, please contact us via Amazon message. We aim to reply as soon as possible to provide support.