Feit Electric S10.5TFL/850/MOT/BZ LED sikkerhedsprojektør brugermanual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light. This outdoor flood light features a motion sensor and dusk-to-dawn functionality, offering efficient and reliable illumination for various outdoor spaces. Please read these instructions thoroughly before installation and use to ensure proper function and safety.

Billede: Forside view of the Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light, showcasing its three adjustable heads and integrated motion sensor.

Sikkerhedsoplysninger

• ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service.
• Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
• Use only UL or ETL listed wire for connections.
• Do not install this fixture with wet hands or while standing on wet or damp overflader.
• Sørg for, at alle forbindelser er sikre og korrekt isolerede.
• This fixture is designed for outdoor use and is wet location rated (IP65).

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light
• Monteringsudstyr (skruer, trådmøtrikker, pakning)
• Instruktionsmanual

Opsætning og installation

This flood light is designed for hardwired, flush mount installation on a wall. Ensure the mounting surface is stable and can support the fixture's weight.

Nødvendige værktøjer (ikke inkluderet):

• Skruetrækker
• Trådstrippere
• Tang
• Elektrisk tape
• Sikkerhedsbriller

Installationstrin:

1. Sluk for strømmen: Locate the circuit breaker controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltage tester.
2. Forbered monteringsoverfladen: Ensure the electrical junction box is securely installed and accessible.
3. Attach Mounting Back Plate: Secure the fixture's mounting back plate to the junction box using the provided screws. Ensure the gasket is properly seated between the back plate and the mounting surface for a weather-tight seal.
4. Ledningsforbindelser: Connect the fixture's wires to your household wiring. Match the wires:
   • Sort (Live) til Sort (Live)
   • Hvid (Neutral) til hvid (Neutral)
   • Grøn eller bart kobber (jord) til grøn eller bart kobber (jord)
   Use the provided wire nuts and secure connections with electrical tape.
5. Monteringsbeslag: Carefully align the fixture with the mounting back plate and secure it with the remaining screws. Ensure no wires are pinched.
6. Forsegling (valgfrit men anbefalet): Apply a bead of silicone caulk around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
7. Gendan strøm: Tænd for strømmen igen ved afbryderen.

Image: Illustration of the hands-free wiring and mounting back plate, demonstrating how the fixture attaches to the wall for installation.

Betjeningsvejledning

Your Feit Electric LED Security Flood Light is equipped with both a motion sensor and dusk-to-dawn technology for automated operation.

Funktionalitet fra skumring til daggry:

The integrated photocell sensor automatically detects ambient light levels. The light will remain off during daylight hours and activate its motion sensing capabilities only when it gets dark. This ensures energy efficiency by preventing the light from operating unnecessarily during the day.

Image: A visual comparison illustrating the effect of dusk-to-dawn functionality, showing the light off during the day and on at night.

Bevægelsessensorens drift:

Once the dusk-to-dawn sensor detects darkness, the motion sensor becomes active. It detects movement within a 180-degree range and up to 60 feet away. Upon detecting motion, the flood light will illuminate to its full 5000 lumens. After a period of no detected motion, the light will automatically turn off or dim down to 500 lumens if configured for lower light levels.

Justering af lyshoveder:

The three LED light heads are independently adjustable, allowing you to direct the light output up to 270 degrees of coverage. Loosen the adjustment screws on each head, position the light as desired, and then securely tighten the screws.

Opretholdelse

The Feit Electric LED Security Flood Light is designed for low maintenance and durability, featuring rugged, weather-resistant aluminum housing and shatter-resistant polycarbonate lenses.

Rensning:

• Sørg for, at strømmen er slukket før rengøring.
• Tør armaturet af med en blød kludamp klæde.
• Do not use abrasive cleaners or solvents, as these can damage the finish or lenses.

Inspektion:

• Periodically inspect the fixture for any signs of damage to the housing or wiring.
• Check that the mounting remains secure.

Image: The flood light mounted on an exterior wall, demonstrating its robust construction and IP65 wet-location rating, capable of withstanding various weather conditions.

Fejlfinding

Specifikationer

Image: A detailed diagram outlining the key specifications of the flood light, such as dimensions, wattage, brightness, color temperature, and IP rating.

Garanti

The manufacturer states that there is no explicit warranty description provided for this product. Please refer to your retailer's return policy or contact Feit Electric directly for any warranty-related inquiries.

Kundesupport

For further assistance, technical support, or to inquire about replacement parts, please contact Feit Electric customer service.

You can also visit the official Feit Electric store for more information and products: Feit Electric Store