Indledning
This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.
The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.
Pakkens indhold
Før installation skal du kontrollere, at alle komponenter er til stede:
- 1 x Flexson Wall Mount
- Instruktionsmanual
- Fixings (screws, wall plugs)
- Corner Adapter (optional use)
Figur 1: eksploderede view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.
Sikkerhedsoplysninger
- Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
- Brug passende værktøj og sikkerhedsudstyr under installationen.
- Hvis du er usikker på installationen, skal du kontakte en kvalificeret fagmand.
- Hold små dele væk fra børn.
Opsætning og installation
Follow these steps for proper installation of your Flexson Wall Mount:
- Vælg placering: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Markér borepunkter: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
- Bore huller: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
- Indsæt vægstik: Insert the appropriate wall plugs into the drilled holes.
- Fastgør vægbeslag: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
- Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
- Monter højttaler: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
- Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
- Juster position: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Figur 2: Front view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.
Figur 3: Side view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.
Figur 4: Vinklet view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.
Betjeningsvejledning
Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.
- Vipning: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
- Drejning: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
- Omvendt montering: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Figur 5: Nærbillede af siden view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.
Opretholdelse
The Flexson Wall Mount requires minimal maintenance.
- Rensning: Tør holderen af med en blød, tør klud for at fjerne støv. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Periodisk kontrol: Periodically check all screws and fixings to ensure they remain tight and secure.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Mount feels loose on wall | Screws or wall plugs not properly secured. | Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type. |
| Speaker not stable in cradle | Cradle components not fully assembled or tightened. | Check all screws securing the speaker cradle. Ensure the speaker is correctly seated. |
| Difficulty adjusting tilt/swivel | Adjustment mechanism is too tight. | Do not force. Check the manual for specific adjustment points and loosen slightly if necessary. |
Specifikationer
| Modelnummer | FLXE100WM1021 |
| Mærke | Flexson |
| Kompatibel højttaler | SONOS ERA100 |
| Materiale | Legeret stål |
| Farve | Sort |
| Finish Type | Pulverlakeret |
| Produktdimensioner | 6.93 x 4.72 x 6.02 tommer (17.6 x 12 x 15.3 cm) |
| Varens vægt | 14.4 ounce (0.41 kg) |
| Belastningskapacitet | 14.2 pund (6.44 kg) |
| Tilt justering | Up to 20 degrees downwards |
| Justering af drejning | 80 degrees (40 degrees left, 40 degrees right) |
Garanti og support
For garantioplysninger og teknisk support henvises til den officielle Flexson webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.
Fabrikant: Flexson
Webwebsted: Visit the Flexson Store on Amazon (for generel mærkeinformation)
