1. Introduktion
Thank you for choosing the MLOVE BV230 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. The BV230 is designed for portability, delivering high-quality audio with enhanced bass, and features IP56 dust and water resistance, making it suitable for various environments.
2. Pakkens indhold
Sørg venligst for, at alle varer er til stede i pakken:
- 1 x MLOVE BV230 Bluetooth Speaker
- 1 x USB Type-C opladningskabel
- 1 x snor
- 1 x Brugsanvisning (dette dokument)
3. Produktet er slutview
Gør dig bekendt med højttalerens komponenter og betjeningselementer.

Figur 3.1: Front view of the MLOVE BV230 speaker, showing the power button, volume controls, and MLOVE branding.

Figur 3.2: Side view of the MLOVE BV230 speaker, highlighting the Micro-SD card slot and the USB Type-C charging port, protected by a rubber flap.
Kontrolknapper:
- Power knap: Tryk og hold nede for at tænde/slukke. Tryk kort for at afspille/sætte musik på pause eller besvare/afslutte opkald.
- Lydstyrke op (+): Kort tryk for at øge lydstyrken. Langt tryk for næste nummer.
- Skrue ned for lyden (-): Kort tryk for at sænke lydstyrken. Langt tryk for forrige nummer.
4. Opsætning
4.1 Opladning af højttaleren
Oplad højttaleren helt før første brug.
- Open the rubber flap on the side of the speaker to expose the charging port.
- Tilslut det medfølgende USB Type-C-opladerkabel til højttalerens opladningsport.
- Tilslut den anden ende af kablet til en USB-strømadapter (medfølger ikke) eller en computers USB-port.
- The charging indicator light will illuminate during charging and turn off once fully charged. A full charge takes approximately 3 hours.
4.2 Tænd/sluk
- For at tænde: Press and hold the Power button for approximately 2-3 seconds until you hear an audible prompt.
- For at slukke: Press and hold the Power button for approximately 2-3 seconds until you hear an audible prompt.
4.3 Bluetooth -parring
Connect your BV230 speaker to a Bluetooth-enabled device.
- Sørg for, at højttaleren er tændt og i Bluetooth-parringstilstand (indikeret med en blinkende LED).
- Aktiver Bluetooth på din enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
- Select "BV230" from the list of found devices.
- Once connected, the speaker will provide an audible confirmation, and the LED indicator will stop flashing.
- The speaker will automatically reconnect to the last paired device when powered on, if within range (up to 10 meters).
4.4 Ægte trådløs stereo (TWS) parring
Connect two MLOVE BV230 speakers for a true wireless stereo experience.

Figur 4.1: Two BV230 speakers demonstrating True Wireless Stereo (TWS) pairing for enhanced audio.
- Ensure both BV230 speakers are powered on and not connected to any other Bluetooth device.
- På en af højttalerne (dette vil være den primære højttaler) skal du dobbelttrykke på tænd/sluk-knappen. Højttaleren vil gå i TWS-parringstilstand.
- The two speakers will automatically search for and connect to each other. You will hear an audible confirmation once TWS pairing is successful.
- Now, connect your Bluetooth device to the primary speaker (the one you initiated TWS pairing on) as described in Section 4.3.
- Lyden afspilles nu i stereo på tværs af begge højttalere.
4.5 Micro-SD Card Playback
Play music directly from a Micro-SD card.
- Åbn gummiklappen på siden af højttaleren.
- Indsæt et Micro-SD-kort (med understøttet lyd) files) into the Micro-SD card slot until it clicks into place.
- The speaker will automatically switch to Micro-SD card playback mode.
- Use the Power button for play/pause and the Volume +/- buttons for track control.
5. Betjeningsvejledning
5.1 Musikafspilning
- Afspil/pause: Tryk kort på afbryderknappen.
- Lydstyrke op: Tryk kort på '+'-knappen.
- Skrue ned for lyden: Tryk kort på '-' knappen.
- Næste nummer: Tryk længe på '+'-knappen.
- Forrige nummer: Tryk længe på '-'-knappen.
5.2 Håndfri opkald
Den indbyggede mikrofon muliggør håndfri opkald, når den er tilsluttet via Bluetooth.

Figur 5.1: The BV230 speaker facilitating a hands-free call, demonstrating its built-in microphone functionality.
- Besvar opkald: Short press the Power button when an incoming call is received.
- Afslut opkald: Tryk kort på tænd/sluk-knappen under et opkald.
- Afvis opkald: Long press the Power button when an incoming call is received.
6. Vedligeholdelse
6.1 Rengøring
To maintain the speaker's appearance and functionality:
- Tør højttaleren af med en blød, damp klæde.
- Brug ikke slibende rengøringsmidler, alkohol eller kemiske opløsningsmidler.
- Ensure the charging port and Micro-SD slot are dry before use or charging.
6.2 Vand- og støvafvisende (IP56)
The MLOVE BV230 speaker is rated IP56, meaning it is protected against dust ingress and can withstand water jets from any direction. This makes it suitable for outdoor use and splashes.

Figur 6.1: The BV230 speaker in water, illustrating its IP56 water resistance.
- Ensure the rubber flap covering the charging port and Micro-SD slot is securely closed to maintain water and dust resistance.
- Do not intentionally submerge the speaker in water for extended periods.
- Avoid exposing the speaker to saltwater or other chemicals, as this may damage the seals.
- If the speaker gets wet, wipe it dry before charging or opening the port flap.
6.3 Opbevaring
- Opbevar højttaleren et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
- If storing for an extended period, charge the battery to approximately 50% every few months to prolong battery life.
7. Fejlfinding
If you encounter issues with your speaker, refer to the following solutions:
| Problem | Mulig løsning |
|---|---|
| Højttaleren tænder ikke. | Sørg for, at batteriet er opladet. Tilslut højttaleren til en strømkilde med USB Type-C-kablet. |
| Kan ikke parres via Bluetooth. |
|
| Ingen lyd eller lav lydstyrke. |
|
| TWS-parring mislykkes. |
|
| Problem med opladning. |
|
8. Specifikationer
Key technical specifications for the MLOVE BV230 speaker:
| Feature | Detalje |
|---|---|
| Modelnavn | BV230 |
| Dimensioner (L x B x H) | 100.8 x 100.8 x 46 mm (approx. 108D x 46W x 108H Millimeters) |
| Varens vægt | 198 g (approx. 280 g with packaging) |
| Højttaler udgangseffekt | 5 watt |
| Batterikapacitet | 1500 mAh Lithium Polymer |
| Spilletid | Op til 8 timer (ved 70 % volumen) |
| Opladningstid | Cirka 3 timer |
| Opladningsport | USB Type-C |
| Bluetooth version | 5.0 |
| Wireless Range | Op til 10 meter (33 fod) |
| Vand- og støvmodstand | IP56 |
| Materiale | Stof |
| Kontrolmetode | Røre |
| Lydudgangstilstand | Stereo (med TWS-parring) |
9. Garanti og support
The MLOVE BV230 Portable Bluetooth Speaker comes with a 12 måneders garanti fra købsdatoen, dækker fabrikationsfejl.
For teknisk support, garantikrav eller yderligere assistance, kontakt venligst din forhandler eller producenten direkte. Gem venligst din købsbevis til garantiservice.





