APC SL-2000-P Konventionel Røgdetektor til Kanal Brugsanvisning

1. Introduktion

This manual provides detailed instructions for the proper installation, operation, and maintenance of the APC SL-2000-P Conventional Duct Smoke Detector. This device is designed to detect the presence of smoke within HVAC (Heating, Ventilation, and Air Conditioning) duct systems, providing an early warning of potential fire conditions. Adherence to these instructions is crucial for the detector's optimal performance and your safety.

2. Vigtige sikkerhedsoplysninger

• Afbryd strømmen: Always disconnect all power to the HVAC system and the smoke detector before performing any installation, maintenance, or servicing. Failure to do so may result in electrical shock or damage to the unit.
• Kvalificeret personale: Installation and servicing of this device should only be performed by qualified and authorized personnel in accordance with all local and national electrical codes and standards.
• Californiens forslag 65 advarsel: This product can expose you to DINP, which is known to the State of California to cause cancer. For more information, please visit www.P65Warnings.ca.gov.
• Tiltænkt brug: This detector is intended for use as a conventional duct smoke detector. Do not use for purposes other than its specified design.

3. Produktet er slutview og komponenter

The APC SL-2000-P is a photoelectric duct smoke detector designed for reliable smoke detection within air ducts. It features a clear cover allowing visual inspection of internal components and indicators.

Figur 3.1: Øverst view of the SL-2000-P detector. Visible components include the photoelectric sensor head, a red alarm LED, and a test port.

The detector unit includes provisions for air sampling tubes, which extend into the ductwork to draw air samples for analysis. These tubes are essential for the detector's proper function.

Figur 3.2: Side view of the SL-2000-P detector with air sampling tube ports. The accessory bag contains the necessary sampling tubes and additional maintenance instructions.

The product packaging provides critical information regarding specifications, certifications, and manufacturer contact details.

Figure 3.3: Product box label detailing specifications, manufacturer information, and certifications.

4. Specifikationer

5. Installationsvejledning

Proper installation is critical for the reliable operation of the SL-2000-P detector. It is recommended that installation be performed by a certified HVAC or electrical technician.

1. Valg af sted: Choose a suitable location on the HVAC ductwork where airflow is consistent and representative of the air within the system. Avoid locations near bends, dampers, or other obstructions that may cause turbulence.
2. Montering: Securely mount the detector housing to the ductwork using appropriate fasteners. Ensure the unit is level and stable.
3. Air Sampling Tube Installation: Install the provided air sampling tubes into the designated ports on the detector. The tubes must extend into the duct to capture air samples effectively. Ensure the tubes are cut to the correct length for the duct size and that the intake and exhaust holes are properly oriented.
4. Ledningsføring: Connect the detector to the appropriate power supply and alarm control panel according to the wiring diagrams provided by the manufacturer (refer to the specific wiring instructions included with your unit). Ensure all connections are secure and comply with local electrical codes. Verify the correct operating voltage (230VAC, 120VAC, 24VDC, or 24VAC) is supplied.
5. Opstart: Once all connections are verified, restore power to the HVAC system and the detector. Observe the detector for initial power-up sequence and status indicators.

6. Betjening

The SL-2000-P detector continuously monitors the air within the duct for the presence of smoke particles. When smoke is detected above a predetermined threshold, the unit will activate its alarm.

• Normal drift: During normal operation, the detector's status indicator (if present) will show a steady state, indicating it is functioning correctly.
• Alarmindikation: Upon smoke detection, the red LED on the sensor head will illuminate, and the detector will send an alarm signal to the connected fire alarm control panel.
• Test: The detector can be tested using two methods:
  • Test Port Valve: Introduce approved test smoke into the test port valve to simulate smoke conditions.
  • Magnet Test Capability: Use a magnet near the designated area on the detector to initiate a functional test.
  Regular testing is recommended to ensure the detector is operating correctly.

7. Vedligeholdelse

Regular maintenance is essential to ensure the long-term reliability and effectiveness of your duct smoke detector. Refer to the specific

Relaterede dokumenter - SL-2000-P

	APC-KP1-C Adgangskontroltastatur Brugermanual Brugermanual til APC-KP1-C adgangskontroltastaturet fra APC Automation Systems. Indeholder detaljerede oplysninger om installation, tekniske specifikationer, administratorbetjening, brugerindstillinger, lyd- og lysindikationer samt systemspecifikationer for sikker adgangskontrol.
	Installationsmanual til APC Proteous-serien STARK6 STARK12 portautomatiseringsaktuator Installationsmanual til APC Proteous-serien af ​​STARK6- og STARK12-portautomatikaktuatorer. Indeholder specifikationer, sikkerhedsinstruktioner, trinvise installationsvejledninger, ledningsdiagrammer og garantioplysninger til portautomatiseringssystemer.
	APC Smart-UPS SRT 10000VA 208V Tekniske specifikationer Detaljerede tekniske specifikationer for APC Smart-UPS SRT 10000VA 208V, inklusive detaljer om output, input, batteri, kommunikation, fysiske, miljømæssige og overholdelsesstandarder. Model SRT10KXLT.
	APC MX28B600 DC-kraftværk Produktmanual Denne produktmanual indeholder detaljerede oplysninger om APC MX28B600 DC-kraftværket, herunder installation, opsætning, drift, tekniske specifikationer og garanti. Lær om dets funktioner, komponenter og vedligeholdelse fra APC.
	Manuale for Funzionamento APC Smart-UPS C: Guide Completa Funktionsmanualtagtilgængelig for APC Smart-UPS C (1000/1500/2000/3000 VA, 120/230 Vac, mantaggio a Rack 2U). Inkluder istruzioni di sicurezza, installation, funzionamento, specifiche tecniche, risoluzione problemi e garanzia.
	APC USB Wi-Fi-enhed Lynstartguide AP9834 Lynstartguide til APC USB Wi-Fi-enheden (AP9834), der beskriver installations- og konfigurationstrinnene for netværksstyringskort.