SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch Brugermanual

1. Produktet er slutview

The SONOFF ZBMINIL2 is an ultra-compact Zigbee 3.0 smart light switch designed for easy integration into your smart home system. Its tiny size allows it to fit into various mounting boxes, and it operates without a neutral wire, simplifying installation. It supports external switches, two-way control, and can be managed via popular smart home platforms like Amazon Alexa, Google Home, and SmartThings.

Figure 1.1: SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch (2-Pack)

2. Sikkerhedsoplysninger

WARNING: Risk of Electric Shock. Installation should be performed by a qualified electrician.

• Always turn off power at the circuit breaker before installing or servicing the device.
• Sørg for, at alle ledningsforbindelser er sikre og korrekte for at forhindre kortslutninger eller skader.
• Overskrid ikke afbryderens maksimale belastningsklassificering.
• Denne enhed er kun designet til indendørs brug.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Your SONOFF ZBMINIL2 package typically includes:

• SONOFF ZBMINIL2 Extreme Zigbee Smart Light Switch (2 units)
• Brugermanual
• Monteringsskruer

4. Installationsvejledning

4.1 Trin før installation

1. Sluk: Locate your circuit breaker and turn off the power to the light switch you are replacing or modifying. Verify power is off using a voltage tester.
2. Fjern eksisterende switch: Carefully pry off the switch panel and remove the existing external switch from the mounting box. Disconnect the wires.

Figure 4.1: DIY Smart Home Integration - Before and After

4.2 Ledningsinstruktioner

The ZBMINIL2 is designed for no-neutral wire installations and supports various external switch types.

• Connect the Live Out (L Out) terminal of the ZBMINIL2 to the light fixture.
• Connect the Live In (L In) terminal of the ZBMINIL2 to the live wire from your power source.
• Connect the two ends of your external switch (e.g., rocker or push-button) to the S1 and S2 terminals of the ZBMINIL2.

Figure 4.2: Wiring with One External Switch Control (Left) and 2-Way Switch Control (Right)

Figure 4.3: External Switch Supported Types

4.3 Fysisk installation

Once wired, carefully place the ZBMINIL2 into the mounting box and secure it with screws. Reattach the switch panel.

5. Opsætning og parring

After installation, restore power at the circuit breaker. The ZBMINIL2 will automatically enter pairing mode (green LED indicator will flash slowly) during its first use.

5.1 Pairing with eWeLink App (via SONOFF Zigbee Bridge-P)

1. Ensure your SONOFF Zigbee Bridge-P is set up and online in the eWeLink App.
2. Open the eWeLink App, go to your Gateway, and select 'Add Subdevices'.
3. The app will search for nearby Zigbee devices. Once found, add the ZBMINIL2.

Figure 5.1: Compatible with various Zigbee Hubs

5.2 Pairing with Other Zigbee Hubs (Alexa, SmartThings, Home Assistant)

The ZBMINIL2 is a Zigbee End-Device and can be paired directly with compatible Zigbee hubs. Refer to your specific hub's instructions for adding new Zigbee devices.

• Amazon Alexa Echo Speaker (Built-in Zigbee Hub): Say, "Alexa, discover my devices."
• SmartThings Hub: Open the SmartThings app, tap '+', then 'Device', and select 'Scan nearby' or search for 'SONOFF'.
• Home Assistant (ZHA/Zigbee2mqtt): Follow the device discovery process within your Home Assistant Zigbee integration.

Figure 5.2: Adding ZBMINIL2 to Home Assistant

6. Betjening

6.1 Manuel kontrol

The ZBMINIL2 supports external switches, allowing you to control your lights manually as well as through smart features. The physical switch connected to S1/S2 terminals will toggle the light on/off.

6.2 App kontrol

Once paired with your Zigbee hub and integrated into its respective app (eWeLink, SmartThings, Alexa App, Google Home App), you can control the light switch remotely from your smartphone or tablet.

6.3 Stemmekontrol

With compatible voice assistants (Amazon Alexa, Google Home), you can control your lights using voice commands. Ensure your ZBMINIL2 is linked to your voice assistant through your Zigbee hub's integration.

Figure 6.1: Voice Control with Google Home

6.4 Avancerede funktioner

• To-vejs kontrol: Achieve two-way control for staircase lighting or other multi-point control scenarios.
• Smarte timere: Set countdown, scheduled, or loop timers for automated lighting control.
• Sceneforbindelse: Create smart scenes to trigger the ZBMINIL2 based on other smart devices or conditions.

Figure 6.2: Application Scenes for ZBMINIL2

7. Vedligeholdelse

• Hold enheden ren og fri for støv. Brug en tør, blød klud til rengøring.
• Undgå at udsætte enheden for fugt eller ekstreme temperaturer.
• Regularly check for firmware updates through your eWeLink app or Zigbee hub's platform to ensure optimal performance and security.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle SONOFF-side. webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.

Online ressourcer:

• SONOFF Officiel Webwebsted: www.sonoff.com
• SONOFF Store on Amazon: Amazon.com/SONOFF