1. Introduktion
This user manual provides comprehensive instructions for the CADDX Turbo Micro F2 FPV Camera. It covers product features, specifications, setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the camera to ensure proper function and longevity.
2. Produktet er slutview
The CADDX Turbo Micro F2 is a compact and high-performance FPV (First Person View) camera designed for various applications, particularly in drones and remote-controlled vehicles. It features a 1/3" CMOS sensor, 1200TVL horizontal resolution, and supports both NTSC and PAL TV systems. A key enhancement over its predecessor, the F1, is the integrated microphone for audio capture.
Figur 2.1: Forside view of the CADDX Turbo Micro F2 FPV Camera, showcasing dens kompakte design og objektiv.
Figure 2.2: Contents of the CADDX Turbo Micro F2 package, including the camera, connection cables, mounting bracket, and OSD control board.
3. Specifikationer
| Feature | Beskrivelse |
|---|---|
| Billedsensor | 1/3" CMOS-sensor |
| Vandret opløsning | 1200TVL |
| TV System | NTSC/PAL (Changeable) |
| Strømindgang | 4.5-40V DC |
| Mini Illumination | 0.001lux |
| Dimensioner | 19 mm x 19 mm x 19 mm |
| Nettovægt | 5.5 g |
| Linse | 2.1 mm |
| Aspektforhold | 16:9 / 4:3 (Non-changeable, specific model variants) |
| Mikrofon | Integreret |
| Videooptagelsesopløsning | 720p (Output) |
4. Opsætning
4.1 Udpakning og inspektion
Carefully unpack all components from the product packaging. Verify that all items listed in the package contents are present and undamaged.
- CADDX Turbo Micro F2 Camera
- Connection Cables (various lengths/connectors)
- Monteringsbeslag
- Skruer
- OSD Control Board (for menu navigation)
- Hex Key (for mounting)
Figure 4.1: The retail packaging for the CADDX Turbo Micro F2 FPV Camera.
4.2 Ledningsdiagram
Connect the camera to your flight controller or video transmitter using the provided cables. Ensure correct polarity for power connections to prevent damage.
- Rød ledning: Power Input (4.5-40V DC)
- Sort ledning: Jord
- Gul ledning: Video output
- Hvid ledning: OSD Control (if applicable)
- Grøn ledning: Audio Output (from microphone)
Forsigtighed: Incorrect wiring can permanently damage the camera. Refer to your flight controller or video transmitter manual for specific connection points.
4.3 Montering
The CADDX Turbo Micro F2 camera has dimensions of 19x19x19mm, making it suitable for micro-sized frames. Use the included mounting bracket and screws to securely attach the camera to your desired platform. Ensure the lens is clear of obstructions and pointed in the desired direction.
5. Betjeningsvejledning
5.1 Tænd
Once correctly wired, apply power within the specified voltage range (4.5-40V DC). The camera will power on and begin transmitting video.
5.2 OSD-menu navigation
The camera features an On-Screen Display (OSD) menu for adjusting settings. Connect the included OSD control board to the camera's OSD port (typically the white wire). Use the joystick on the OSD board to navigate the menu:
- Press Center: Enter/Confirm selection
- Op ned: Naviger i menuindstillinger
- Venstre/højre: Adjust values or navigate sub-menus
Almindelige justerbare indstillinger inkluderer:
- Lysstyrke
- Kontrast
- Mætning
- Skarphed
- Bredt dynamisk område (WDR)
- TV System (NTSC/PAL - if supported by your specific camera variant)
Note: While the camera supports both NTSC and PAL, some variants may have a non-changeable aspect ratio (16:9 or 4:3). Check your specific product variant for details.
6. Vedligeholdelse
To ensure optimal performance and longevity of your CADDX Turbo Micro F2 camera, follow these maintenance guidelines:
- Rengøring af linser: Gently clean the camera lens with a soft, lint-free cloth. For stubborn smudges, use a lens cleaning solution designed for optics. Avoid abrasive materials.
- Støv og affald: Keep the camera free from dust and debris, especially around the lens and sensor area. Use compressed air if necessary, but avoid direct high-pressure blasts.
- Miljøbeskyttelse: While the camera is robust, avoid exposing it to extreme temperatures, direct water immersion, or excessive vibrations beyond its intended use.
- Kabelinspektion: Periodically check all connected cables for signs of wear, fraying, or damage. Replace damaged cables immediately to prevent electrical issues.
- Opbevaring: When not in use, store the camera in a dry, cool place, away from direct sunlight and static electricity.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen videoudgang | Incorrect wiring; No power; Damaged cable; Incorrect TV system setting. | Verify all wiring connections (power, ground, video). Check power supply voltage. Inspect cables for damage. Ensure TV system (NTSC/PAL) matches your video receiver. |
| Flickering or distorted video | Power fluctuations; Interference; Loose connection; Damaged sensor. | Ensure stable power supply. Check for sources of electromagnetic interference. Secure all connections. If problem persists, camera sensor may be damaged. |
| OSD-menuen vises ikke | OSD board not connected; Faulty OSD board/cable. | Connect the OSD control board correctly. Test with a different OSD board or cable if available. |
| Dårlig billedkvalitet (sløret/mørk) | Dirty lens; Incorrect OSD settings; Low light conditions. | Clean the camera lens. Adjust brightness, contrast, and WDR settings via the OSD menu. Ensure adequate lighting for optimal performance. |
| Ingen lyd fra mikrofonen | Audio wire not connected; Receiver not configured for audio. | Ensure the green audio wire is correctly connected to your video transmitter/receiver. Verify your video receiver/goggles support audio input and are configured to receive it. |
8. Garanti og support
For information regarding warranty coverage, technical support, or service, please refer to the official CADDX webwebstedet eller kontakt den forhandler, hvor du købte produktet. Gem din købsbevis til garantikrav.
Fabrikant: Generic (Note: Product is branded CADDX)
Modelnavn: MICRO F2
