MFSTUDIO Cast Aluminum Patio Dining Table 63" Rectangle Outdoor Table User Manual

1. Introduktion

Tak for købetasing the MFSTUDIO Cast Aluminum Patio Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor dining table. Please read these instructions carefully before assembly and retain them for future reference.

Sikkerhedsoplysninger

• Saml altid bordet på en blød, ren overflade for at undgå ridser.
• Sørg for, at alle bolte og fastgørelseselementer er forsvarligt spændt før brug. Kontroller regelmæssigt og efterspænd efter behov.
• Do not exceed the recommended weight capacity of 200 kg (440 lbs).
• When using an umbrella, ensure it is properly secured in the umbrella hole and use a weighted base to prevent tipping, especially in windy conditions.
• Hold små dele og emballagematerialer væk fra børn.
• Assembly may require careful handling of sharp edges. Wear gloves if necessary.

2. Reservedelsliste

Kontroller venligst, at alle komponenter er til stede, før monteringen påbegyndes. Hvis der mangler eller er beskadigede dele, skal du kontakte kundesupport.

• Bordplade (1)
• Ben (4)
• Crossbars/Support Frame (2-4, depending on design)
• Hardware Pack (Bolts, Washers, Nuts, Allen Wrench)
• Umbrella Hole Cap (1)

3. Monteringsvejledning

Follow these steps to assemble your MFSTUDIO patio dining table. It is recommended to have two people for assembly.

1. Udpak komponenter: Carefully remove all parts from the packaging. Place them on a soft, non-abrasive surface to prevent damage. Identify all parts against the parts list.
2. Fastgør benene til bordpladen: Position the tabletop upside down. Align the mounting points on each leg with the corresponding holes on the underside of the tabletop. Secure each leg using the provided bolts and washers. Do not fully tighten bolts at this stage.
3. Install Crossbars/Support Frame: Connect the crossbars or support frame between the legs. Ensure proper alignment of all holes. Secure with bolts and washers. Again, do not fully tighten.
4. Endelig stramning: Once all components are loosely assembled, carefully flip the table upright. Ensure the table is level and stable. Then, progressively tighten all bolts using the Allen wrench. Start with the tabletop connections, then the crossbars, ensuring even pressure. Do not overtighten.
5. Insert Umbrella Hole Cap: Place the umbrella hole cap into the center hole of the tabletop if an umbrella is not being used.

4. Betjeningsvejledning

The MFSTUDIO Cast Aluminum Patio Dining Table is designed for outdoor dining and general use.

• Umbrella Usage: The table features a central umbrella hole designed to accommodate umbrella poles up to 2.16 inches in diameter. Insert your patio umbrella through the hole. For optimal stability and safety, especially in windy conditions, always use a weighted umbrella base (not included) to secure the umbrella.
• Siddekapacitet: This rectangular table is designed to comfortably seat up to 6 individuals.

5. Vedligeholdelse

Proper care will extend the life and appearance of your patio dining table.

• Rensning: Wipe the table regularly with a soft cloth dampened with mild soap and water. Rinse thoroughly with clean water and dry completely to prevent water spots. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Rustforebyggelse: The cast aluminum construction is designed to be rust-resistant. However, regular cleaning and ensuring the table is dry after rain will further protect the finish.
• Sæsonbestemt opbevaring: While designed for outdoor use, storing the table indoors or covering it with a protective cover during extreme weather conditions or off-season periods can help preserve its condition.
• Hardwarekontrol: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain stability.

6. Fejlfinding

Se følgende tabel for almindelige problemer og deres løsninger.

7. Specifikationer

8. Garanti og support

For any questions, missing parts, or assistance with your MFSTUDIO Cast Aluminum Patio Dining Table, please contact customer support through your retailer. Refer to your purchase documentation for specific warranty details and return policies. Typically, a 30-day return policy is offered.