1. Introduktion
The VTOMAN Jump 2200 is a high-capacity portable power station designed to provide reliable power for various applications, including outdoor activities, RV life, and emergency backup. Featuring a robust LiFePO4 battery and multiple output ports, it offers a versatile and safe energy solution.
Figure 1: VTOMAN Jump 2200 Portable Power Station. This image shows the main unit with its handle, display, and various ports.
2. Sikkerhedsinstruktioner
Please read and understand all safety instructions before operating the VTOMAN Jump 2200. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Enheden må ikke skilles ad, repareres eller ændres. Forkert samling kan forårsage brand eller elektrisk stød.
- Keep the unit away from fire and direct sunlight.
- Brug eller opbevar ikke enheden på et badeværelse eller i et område, der er udsat for vand eller fugt.
- Brug ikke enheden, hvis den er beskadiget eller har været tabt.
- Opbevares utilgængeligt for børn og kæledyr.
- Sørg for tilstrækkelig ventilation under brug og opladning for at forhindre overophedning.
- Brug kun VTOMAN-godkendt tilbehør og opladningskabler.
- The SuperSafe LIFEBMS provides multiple battery protections (overcharge, over-discharge, over-voltage, over-current, short-circuit, high temperature). However, always operate within specified limits.
- When using the 2200W constant power output for devices exceeding 2200W, ensure the connected device is not sensitive to voltage fluctuations, as this mode provides an alternative emergency solution rather than precise voltage regulation for sensitive electronics.
Figur 2: Intern view highlighting the SuperSafe LIFEBMS protection system and LiFePO4 battery cells. This system provides enhanced safety and durability.
3. Produktet er slutview
The VTOMAN Jump 2200 features a robust design with various input and output ports to meet diverse power needs.
3.1 Komponenter og porte
- Hovedenhed: The portable power station with integrated LiFePO4 battery.
- LCD-skærm: Viser batteriniveau, input/output watttage, og estimeret resterende tid.
- DC5521 Input (12-30V, 200W Max): For wall charger, car charger, or solar panel input.
- USB-C PD 100W Output: For fast charging compatible devices like laptops and smartphones.
- USB-A Outputs (3 ports, including QC 3.0 18W Max): Til opladning af smartphones, tablets og andre USB-drevne enheder.
- AC Outlets (2x 230V/2200W Pure Sine Wave): For powering household appliances and electronics.
- DC5521 Outputs (2x 12V/10A): For devices like car refrigerators, CPAP machines, and portable tire inflators.
- Car Port (12V/10A): Til biltilbehør.
- Jumperkabelport: For connecting jumper cables to start a vehicle battery (jumper cables sold separately).
- Backup Battery Port: For connecting an optional VTOMAN Jump 1500 additional battery to expand capacity.
- LED lommelygte: Integreret lys til belysning under forhold med svagt lys.
Figur 3: Detaljeret view of the VTOMAN Jump 2200, showing the location and type of each input and output port, including the LCD display and LED flashlight.
4. Opsætning og opladning
Before first use, fully charge the VTOMAN Jump 2200. The unit supports pass-through charging, allowing you to power devices while it is being charged.
4.1 opladningsmetoder
The Jump 2200 can be charged using three methods:
- Wall Charger (AC Adapter): Connect the included AC adapter to the DC5521 input port and plug it into a standard wall outlet. Charging time is approximately 4 to 5 hours.
- Biloplader: Use the included car charging cable to connect the unit to your vehicle's 12V car outlet. Charging time is approximately 9 to 12 hours.
- Solpanel: Connect a compatible 110W/220W/400W solar panel (sold separately) to the DC5521 input port. Charging time varies depending on solar intensity, typically 6 to 8 hours for a full charge. The unit features a built-in MPPT controller for efficient solar charging.
Figure 4: Illustration of the three charging methods: wall outlet, car charger, and solar panel.
5. Betjeningsvejledning
The VTOMAN Jump 2200 offers multiple output options for various devices.
5.1 Strømforsyning til enheder
- AC-udgang: Press the AC power button to activate the 230V AC outlets. The unit provides a nominal output of 2200W with a peak of 4400W. It also features a constant power output of 2200W, allowing it to power devices requiring more than 2200W by maintaining a steady output, ideal for resistive loads like heaters or ovens in emergency situations.
- DC-udgang: Press the DC power button to activate the 12V DC5521 ports and the 12V car port. These ports provide a regulated 12V output, suitable for devices like car fridges or CPAP machines. The total maximum output for these ports is 120W.
- USB-udgang: The USB ports (USB-A and USB-C) are typically always active when the unit is on. The USB-C port supports Power Delivery (PD) up to 100W for fast charging laptops and other compatible devices. The USB-A ports include a Quick Charge 3.0 port (18W max) for rapid charging of smartphones and tablets.
Figure 5: Demonstrates the VTOMAN Jump 2200 providing constant 2200W output to a heater in a cold environment, showcasing its capability to power high-wattage enheder.
5.2 Bilstartfunktion
The VTOMAN Jump 2200 can safely jump-start a dead 12V car battery. This feature is designed for gasoline engines up to 8 liters and diesel engines up to 6 liters. Jumper cables are sold separately.
- Ensure the power station is sufficiently charged.
- Connect the jumper cables (red to positive, black to negative) to the vehicle battery terminals.
- Connect the other end of the jumper cables to the dedicated jumper cable port on the Jump 2200.
- Start køretøjet.
- Once the vehicle starts, disconnect the jumper cables from the power station first, then from the vehicle battery.
Figure 6: The VTOMAN Jump 2200 connected to a car battery for jump-starting, illustrating its emergency vehicle starting capability.
6. Expandable Capacity
The VTOMAN Jump 2200's capacity can be expanded by connecting an optional VTOMAN Jump 1500 additional battery (sold separately). This increases the total capacity from 1548Wh to 3096Wh, providing extended runtime for your devices.
Figure 7: Shows the VTOMAN Jump 2200 connected to an additional Jump 1500 battery, demonstrating how the capacity can be expanded for longer power supply.
7. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your VTOMAN Jump 2200.
- Opbevaring: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. For long-term storage, charge the unit to 50-80% every 3-6 months to preserve battery health.
- Rensning: Brug en tør, blød klud til at rengøre enhedens yderside. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Batterilevetid: The integrated LiFePO4 battery is designed for over 3000 charge cycles to retain 80% of its original capacity, offering exceptional durability.
- Ventilation: Sørg for, at ventilationsåbningerne er fri for støv og snavs for at forhindre overophedning.
8. Fejlfinding
Hvis du støder på problemer med din VTOMAN Jump 2200, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden oplades ikke | Charging cable not connected properly; charger malfunction; unit too hot/cold. | Ensure all connections are secure. Try a different charging method. Allow unit to reach optimal operating temperature (0-40°C). |
| Ingen output fra porte | Output port not activated; device power draw too high; unit battery low. | Press the corresponding output button (AC/DC). Check device wattage. Recharge the power station. |
| LCD-skærm virker ikke | Enheden er slukket; intern fejl. | Press the main power button. If issue persists, contact customer support. |
| Enheden overophedes | Dårlig ventilation; overdreven belastning. | Ensure vents are clear. Reduce connected load. Allow unit to cool down. |
For issues not listed above or if troubleshooting steps do not resolve the problem, please contact VTOMAN customer support.
9. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | PB-29 |
| Batteritype | LiFePO4 |
| Kapacitet | 1548Wh (Expandable to 3096Wh with Jump 1500) |
| AC udgang | 2200W (Rated), 4400W (Peak), 230V Pure Sine Wave |
| DC-udgang (DC5521) | 2 x 12V/10A (120W Max total) |
| Bilport udgang | 1 x 12V/10A (120W Max) |
| USB-C udgang | 1 x 100W PD |
| USB-A-output | 3 ports (including 1 x 18W QC 3.0) |
| DC Input | 12-30V, 200W Maks |
| Dimensioner (L x B x H) | 36.07 x 27.94 x 26.92 cm |
| Vægt | 17.5 kg |
| Driftstemperatur | 0°C til 40°C (32°F til 104°F) |
Figure 8: Dimensions of the VTOMAN Jump 2200, indicating its length, width, and height for reference.
10. Garanti og support
VTOMAN yder omfattende support til sine produkter.
- Garanti: The VTOMAN Jump 2200 comes with a 24-month protection warranty.
- Returnerer: Enjoy 30-day easy returns for your peace of mind.
- Kundesupport: For assistance, please reach out to us at service.eu@vtoman.com. Our products are returnable, and we provide ongoing support to ensure your satisfaction.
