Aurora WINDY 2B badeværelsesvarmer brugsanvisning

1. Introduktion

Thank you for choosing the Aurora WINDY 2B Bathroom Heater. This manual provides essential information for the safe and efficient operation of your new appliance. Please read these instructions carefully before installation and use, and retain them for future reference.

2. Sikkerhedsoplysninger

Vigtige sikkerhedsinstruktioner:

• Læs alle instruktioner, før du bruger denne varmeovn.
• Brug ikke denne varmeovn i umiddelbar nærhed af et bad, en bruser eller en swimmingpool.
• Sørg for, at strømforsyningen voltage stemmer overens med typeskiltet på apparatet.
• Dæk ikke varmeren til for at undgå overophedning.
• Hold brændbare materialer væk fra varmeren.
• Dette apparat er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner, eller mangel på erfaring og viden, medmindre de har fået opsyn eller instruktion i brugen af ​​apparatet af en person, der er ansvarlig for deres sikkerhed.
• Børn skal være under opsyn for at sikre, at de ikke leger med apparatet.
• Hvis netledningen er beskadiget, skal den udskiftes af producenten, dennes serviceagent eller lignende kvalificerede personer for at undgå en fare.
• The heater is designed with IP24 protection, making it suitable for installation in damp places like bathrooms, but direct water spray should be avoided.

3. Pakkens indhold

Kontroller venligst, at alle komponenter er til stede og ubeskadigede:

• Aurora WINDY 2B Bathroom Heater Unit
• Blower dryer component (integrated)
• Double aluminum towel holder
• Installation accessories (screws, wall plugs - typically included)
• Instruktionsmanual (dette dokument)

4. Produktet er slutview

The Aurora WINDY 2B is a wall-mounted bathroom heater designed for efficient heating and towel drying. It features a sleek, ultra-flat design and advanced digital controls.

Figur 1: Forside view of the Aurora WINDY 2B Bathroom Heater, showing the digital display and control panel on the right, and the towel bars below.

Nøglefunktioner:

• Touch Screen Controls & LED Display: For precise temperature regulation and easy operation.
• Pre-set Weekly Programs: 5 customizable programs for automated heating.
• Flere driftstilstande: COMFORT, AUTO, PROGRAMMED, FROST FREE.
• Bevægelsessensor: Detects presence to optimize heating.
• Registrering af åbent vindue: Automatically adjusts heating when a window is open to save energy.
• BOOST Function: Provides ultra-fast heat when needed.
• Ultra-flat Design: Only 11.2 cm (4.5 inches) thick when wall-mounted.
• Removable and Washable Dust Filter: For easy maintenance and improved air quality.
• IP24 beskyttelse: Suitable for installation in damp miljøer som badeværelser.
• Double Aluminum Towel Holder: For heating and drying towels.

Figur 2: Forside view of the Aurora WINDY 2B Bathroom Heater, highlighting its compact design and integrated towel bars.

Figure 3: The Aurora WINDY 2B Bathroom Heater shown installed on a bathroom wall, with a towel draped over the bars.

5. Installation og opsætning

The Aurora WINDY 2B is designed for wall-mounted installation. Due to its electrical nature and use in a damp environment, professional installation is recommended.

1. Vælg placering: Select a suitable wall location in your bathroom, ensuring it is not directly above a bath or shower and adheres to local electrical regulations for bathroom zones. The heater requires a standard electrical outlet.
2. Montering: Securely mount the heater to the wall using the provided installation accessories. Ensure the unit is level and firmly attached. The ultra-flat design allows for minimal protrusion from the wall.
3. Elektrisk tilslutning: Connect the heater to a suitable power supply. Ensure the circuit is protected by a Residual Current Device (RCD) as required for bathroom installations.
4. Towel Holder Attachment: Attach the double aluminum towel holder to the designated points on the heater.
5. Første gang tændt: Once installed, switch on the power supply to the heater. The LED display should illuminate.

Note: The heater is rated IP24, providing protection against splashing water. However, avoid direct exposure to water jets.

6. Betjeningsvejledning

The WINDY 2B features intuitive touch screen controls and an LED display for easy operation.

6.1. Grundlæggende betjening

• Tænd/sluk: Use the dedicated power button on the touch screen to turn the unit on or off.
• Temperaturindstilling: Adjust the desired temperature using the up/down arrows on the touch screen. The LED display will show the set temperature.

6.2. Driftstilstande

Select from four distinct operating modes to suit your heating needs:

• KOMFORT tilstand: Maintains a constant, user-defined comfortable temperature.
• AUTO-tilstand: Automatically adjusts heating based on ambient conditions and programmed settings.
• PROGRAMMED Mode: Follows one of the 5 pre-set weekly programs. You can customize these programs to match your schedule. Refer to the detailed programming section in the full manual for setup.
• FROST FREE Mode: Maintains a minimum temperature (e.g., 5°C / 41°F) to prevent freezing in the room, ideal for periods of absence.

6.3. Avancerede funktioner

• Bevægelsessensor: The integrated motion sensor detects presence in the room and can adjust heating accordingly, saving energy when the room is unoccupied.
• Registrering af åbent vindue: If a sudden drop in temperature is detected (indicating an open window), the heater will temporarily pause heating to avoid energy waste. Heating resumes once the window is closed or after a set period.
• BOOST Function: Activate the BOOST function for a rapid increase in room temperature or quick towel drying. This function typically operates for a limited time before returning to the previous mode.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din varmeovn.

• Rengøring af ydersiden: Disconnect the power before cleaning. Wipe the exterior surfaces with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Rengøring af støvfilter: The WINDY 2B features a removable and washable dust filter. Regularly remove the filter, clean it under running water, and ensure it is completely dry before reinserting. This helps maintain heating efficiency and air quality.
• Opbevaring: Hvis varmeapparatet opbevares i længere tid, skal det sikres, at det er rent og tørt. Opbevares køligt og tørt.

8. Fejlfinding

If you encounter issues with your Aurora WINDY 2B heater, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Aurora customer support.

9. Specifikationer

10. Garanti og support

For garantioplysninger og kundesupport henvises til den officielle Aurora-butik. webwebsted eller kontakt din forhandler.

Udvidede garantimuligheder kan være tilgængelige fra tredjepartsudbydere:

• 1 års udvidet garanti fra Salama Care
• 2 års udvidet garanti fra Salama Care

Gem venligst dit købsbevis for garantikrav.