1. Introduktion
This manual provides essential information for the safe and effective operation of your DJXFLI 8x15W Spider Moving Head Light. Please read these instructions thoroughly before installation and use. Retain this manual for future reference.
The DJXFLI 8x15W Spider Moving Head Light is a versatile stage lighting fixture featuring eight 15W RGBW 4-in-1 LEDs. It offers dynamic beam effects, color mixing, strobe, and dimming capabilities, suitable for various event environments.
Image 1.1: Two DJXFLI 8x15W Spider Moving Head Lights, showcasing their multi-color beam output.
2. Sikkerhedsoplysninger
- Elektrisk sikkerhed: Sørg for, at strømforsyningen voltage matches the specified requirements (120 Volts). Always connect to a grounded outlet. Disconnect power before cleaning or servicing.
- Installation: Mount the fixture securely using appropriate hardware. Ensure adequate ventilation around the unit to prevent overheating. Do not block cooling vents.
- Operation: Avoid direct eye exposure to the light source. Do not operate the fixture in wet or damp conditions. Keep away from flammable materials.
- Opretholdelse: Refer to the maintenance section for cleaning and care instructions. Only qualified personnel should perform repairs.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- 1 x DJXFLI 8x15W Spider Moving Head Light
- 1 x strømkabel
- 1 x Brugermanual (dette dokument)
- 1 x DMX kabel
- Monteringsbeslag og skruer
4. Produktet er slutview
The DJXFLI 8x15W Spider Moving Head Light features a robust design with eight individually controllable RGBW LEDs. The unit includes a control panel for mode selection and DMX connectivity for advanced control.
Image 4.1: Rear panel of the DJXFLI Spider Moving Head Light, showing power, DMX, and control interface.
Kontrolpanelets funktioner:
- Funktionsdisplay: Digital screen showing current mode and settings.
- MENU knap: Navigerer gennem forskellige indstillinger og tilstande.
- OP/NED knapper: Adjust values or select options.
- ENTER knap: Bekræfter valg.
- Power IN/OUT: IEC power connections for daisy-chaining multiple units.
- DMX IN/OUT: 3-pin XLR connectors for DMX 512 control.
- MIC: Integrated microphone for Sound Activated mode.
Image 4.2: Close-up of the DMX input and output ports.
5. Opsætning
5.1 Montering
The fixture can be mounted to a truss or ceiling using the provided brackets and screws. Ensure the mounting surface or structure can support the weight of the fixture (approximately 9.87 kg or 21.7 lbs).
- Attach the mounting brackets to the fixture using the designated screw points.
- Securely fasten the fixture to the desired location, ensuring it is stable and cannot vibrate loose.
5.2 Strømtilslutning
Connect the provided power cable to the 'POWER IN' port on the rear of the fixture and then to a suitable grounded power outlet. Multiple units can be daisy-chained using the 'POWER OUT' port, ensuring the total current draw does not exceed the circuit's capacity.
5.3 DMX-tilslutning (valgfrit)
For DMX 512 control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port of the first fixture. For multiple fixtures, connect the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on. Terminate the last fixture in the chain with a DMX terminator if experiencing signal issues.
6. Driftstilstande
The DJXFLI Spider Moving Head Light offers several operating modes, selectable via the control panel.
Image 6.1: Visual representation of available control modes.
6.1 DMX 512-tilstand
This mode allows external control of the fixture's functions using a DMX controller. Set the DMX address for each fixture using the control panel. The fixture supports 13 or 43 DMX channels, providing detailed control over movement, color, strobe, and dimming.
6.2 Lydaktiveret tilstand
In this mode, the fixture reacts to ambient sound via its built-in microphone, creating dynamic light patterns synchronized with music. Use the control panel to adjust sound sensitivity if available.
6.3 Auto-tilstand
The fixture runs through pre-programmed internal light shows automatically. This mode is suitable for standalone operation without external control.
6.4 Master/Slave-tilstand
Connect multiple fixtures via DMX cables. Set one fixture as the 'Master' and the others as 'Slave' units. The slave units will then mirror the master's operation, creating synchronized light shows without a DMX controller.
Billede 6.2: Eks.ample of lighting effects, highlighting 180-degree tilt and individual beam control.
Billede 6.3: Eks.amples of color mixing, strobe effects (1-25 flashes/second), and 0-100% dimming range.
7. DMX Channel Chart
The following table details the DMX channels for controlling the DJXFLI 8x15W Spider Moving Head Light. The fixture supports both 13-channel and 43-channel modes.
Image 7.1: DMX Channel assignments for 13-channel and 43-channel modes.
Note: For detailed programming, refer to the specific DMX channel functions for each mode. The 43-channel mode offers individual RGBW control for each of the 8 LEDs.
8. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for dit armatur.
- Rensning: Periodically clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the fixture is powered off and cooled before cleaning.
- Kølesystem: The fixture features a high-quality cooling system. Ensure vents are clear of dust and debris to prevent overheating.
- Inspektion: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
9. Fejlfinding
Dette afsnit omhandler almindelige problemer, du kan støde på.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Armaturet tænder ikke | No power supply; faulty cable; internal fuse blown | Check power connection; test power cable; consult qualified technician for fuse replacement. |
| Ingen DMX kontrol | Incorrect DMX address; faulty DMX cable; no DMX signal; missing terminator | Verify DMX address setting; check DMX cable connections; ensure DMX controller is active; add DMX terminator to the last fixture. |
| Lys flimrer eller opfører sig uregelmæssigt | DMX signal interference; power fluctuations; overheating | Check DMX connections and termination; ensure stable power supply; verify adequate ventilation. |
| Motor grinding noise in DMX AUTO mode | Software glitch when DMX triggers AUTO mode | Avoid using DMX to trigger AUTO mode; use standalone AUTO mode or program specific movements via DMX. |
10. Specifikationer
| Model | 8 eye |
| Mærke | DJXFLI |
| Lyskilde | 8 x 15W RGBW 4-i-1 LED'er |
| Voltage | 120 volt |
| Maksimal kompatibel lyskilde Wattage | 150 watt |
| Lyskilde Wattage | 120 watt |
| Materiale | Aluminium, plast |
| Produktmål (L x B x H) | 11" x 7.4" x 17.7" (27.94 cm x 18.8 cm x 44.96 cm) |
| Varens vægt | 9.87 kilo (21.7 pund) |
| Kontroltilstande | DMX 512, Sound Activated, Auto, Master/Slave |
| DMX kanaler | 13 eller 43 kanaler |
| Monteringstype | Loftmontering |
| Pærefunktioner | Dæmpbar |
Billede 10.1: Produktmål til installationsplanlægning.
11. Garanti og support
The DJXFLI 8x15W Spider Moving Head Light comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For technical support, warranty claims, or any inquiries regarding your product, please contact DJXFLI customer service through the retailer where the product was purchased. Please have your purchase receipt and product model number (8 eye) available when contacting support.
