Daytech Wireless Caregiver Pager System Instruction Manual

1. Produktet er slutview

The Daytech Wireless Caregiver Pager System is designed to provide quick and efficient communication between a patient or elderly individual and their caregiver. This system enhances independence for the user while offering peace of mind to family members and caregivers. It is suitable for use in private households, hospitals, and nursing homes.

Figure 1: Daytech Wireless Caregiver Pager System components, including two plug-in receivers and one watch-style call button.

2. Pakkens indhold

• 1 x Wireless Watch Pager
• 2 x Plug-in-modtagere
• 1 x Call Button (with lanyard and double-sided patch)
• 1 x Small Screwdriver (for battery replacement)
• 3 x AAA Batteries (included, for call button)

3. Opsætningsvejledning

3.1 Initial Setup and Powering On

1. Opsætning af modtager: Plug the receiver unit into a standard electrical outlet. The receiver will power on automatically.
2. Call Button Battery Installation: The call button requires 3 AAA batteries (included). Use the provided small screwdriver to open the battery compartment, insert the batteries, and securely close the compartment.
3. Watch Pager: The watch pager comes with a pre-installed battery and is ready for use.

3.2 Modifying Ringtone and Pairing

The system comes pre-paired with standard factory settings. If you wish to change the ringtone or re-pair units, follow these steps:

Figure 2: Steps for ringtone selection and pairing.

1. Tilslut modtager: Ensure the receiver is plugged into a power socket.
2. Vælg ringetone: On the receiver, press the 'Forward' or 'Backward' buttons to cycle through the 20 available ringtones until you find your preferred sound.
3. Gå ind i parringstilstand: Press and hold the 'Volume Control' button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
4. Pair Transmitter: While the receiver is in pairing mode, press the call button on the watch pager or the separate call button. The receiver will make another "ding-dong" sound, confirming successful pairing.

3.3 Call Button Installation Options

The call button can be used in various ways for convenience and accessibility:

• Bær rundt om halsen: Attach the included lanyard to the call button for easy access.
• Bære på håndled: The watch pager is designed to be worn on the wrist.
• Reparation på væggen: Use the provided 3M double-sided patch to affix the call button to a wall, such as in a bathroom or by a bedside. The call button unit is splash-proof (IP55 rated).

Figure 3: Versatile placement options for the call button.

4. Betjeningsvejledning

Using the Daytech Caregiver Pager System is straightforward:

1. Indledning af et opkald: When assistance is needed, simply press the large 'SOS' button on the watch pager or the 'CALL' button on the separate call button.
2. Modtagelse af en advarsel: The paired receiver(s) will sound the selected ringtone and may flash an indicator light, alerting the caregiver.
3. Justering af lydstyrke: The receiver has a volume control button to adjust the alert sound level. There are 5 volume levels available, up to 110 dB.

Figure 4: Key features of the watch pager.

The system offers a working range of up to 100ft/30m indoors, allowing caregivers freedom of movement within the home.

Figure 5: Wireless range illustration.

5. Vedligeholdelse

5.1 Battery Replacement for Call Button

The call button is powered by 3 AAA batteries. When the signal weakens or the button stops responding, it's time to replace the batteries. Use the provided small screwdriver to open the back cover, replace the old batteries with new ones, and secure the cover.

5.2 Generel pleje

• Hold enhederne rene ved at tørre dem af med en blød, tør klud.
• Avoid exposing the watch pager and call button to excessive moisture or immersion in water. While the call button is splash-proof, it is not designed for submersion.
• Store the system in a cool, dry place when not in use for extended periods.

6. Fejlfinding

• Ingen alarm fra modtager:
  • Sørg for, at modtageren er korrekt tilsluttet en fungerende stikkontakt.
  • Check if the call button or watch pager battery needs replacement.
  • Verify that the call button/watch pager is paired with the receiver (refer to Section 3.2).
  • Ensure the devices are within the operational range (up to 100ft/30m). Walls and other obstacles can reduce range.
• Weak Signal or Intermittent Alerts:
  • Relocate the receiver to a more central location or closer to the user.
  • Check for potential interference from other electronic devices.
  • Replace batteries in the call button/watch pager.
• Ringtone Not Changing:
  • Follow the ringtone selection steps carefully (Section 3.2).
  • Ensure you are pressing the correct 'Forward' or 'Backward' buttons.

7. Specifikationer

8. Garanti og support

Daytech provides a full year's warranty and a money-back guarantee for this product. Round-the-clock customer service is available to assist with any queries or issues you may encounter.

For further assistance, please refer to the official Daytech webwebstedet eller kontakt deres kundesupport direkte.