Indledning
This user manual provides detailed instructions for the safe and effective use of your Polini 100ml Measuring/Mixing Beaker. Designed for precise preparation of oil-gasoline mixtures for two-stroke engines, this beaker ensures accurate ratios for optimal engine performance and longevity. Please read this manual thoroughly before first use.
Produkt overview
Image: The Polini 100ml Measuring/Mixing Beaker, a translucent plastic cylinder with a white cap. The beaker features clear markings for volume in milliliters and percentage markings for oil-gasoline mixture ratios (e.g., 2% and 4%).
The Polini 100ml Measuring/Mixing Beaker (Model 121.100) is a durable plastic container specifically designed for accurately measuring and mixing oil with gasoline for two-stroke engines. It features clear graduation marks for volume and specific percentage markings to simplify the preparation of common fuel mixtures.
Opsætning
The Polini Measuring/Mixing Beaker requires no complex setup. It is ready for immediate use upon unboxing.
- Pakker ud: Carefully remove the beaker from its packaging.
- Inspicere: Before first use, inspect the beaker for any signs of damage or cracks. Do not use if damaged.
- Ren: It is recommended to rinse the beaker with clean water before its initial use to remove any manufacturing residues. Ensure it is completely dry before adding fuel components.
Betjeningsvejledning
This beaker is designed to help you prepare precise oil-gasoline mixtures for two-stroke engines. Always refer to your engine's manufacturer specifications for the correct mixing ratio.
General Mixing Procedure:
- Determine Required Mixture: Identify the total volume of gasoline you intend to mix and the required oil-to-gasoline ratio (e.g., 2%, 4%).
- Tilsæt olie: Pour the appropriate two-stroke engine oil into the beaker up to the desired percentage mark (e.g., the '2%' line for a 2% mixture, or the '4%' line for a 4% mixture). The beaker's capacity is 100ml.
- Tilføj benzin: Carefully pour gasoline into the beaker until the total volume reaches the corresponding liter mark for the chosen percentage.
- For en 2% mixture: The beaker supports mixing for up to 4 liters of gasoline. Fill oil to the 2% mark, then fill gasoline to the corresponding liter mark (e.g., '1L', '2L', '3L', '4L').
- For en 4% mixture: The beaker supports mixing for up to 2 liters of gasoline. Fill oil to the 4% mark, then fill gasoline to the corresponding liter mark (e.g., '1L', '2L').
- Seal and Mix: Securely place the cap on the beaker. Gently shake the beaker to ensure the oil and gasoline are thoroughly mixed.
- Overførsel: Pour the prepared mixture into your engine's fuel tank or a suitable fuel container.
Vigtig sikkerhedsbemærkning: Always handle gasoline and oil in a well-ventilated area, away from open flames or ignition sources. Wear appropriate personal protective equipment, such as gloves and eye protection.
Opretholdelse
Proper maintenance will extend the life of your Polini Measuring/Mixing Beaker and ensure continued accuracy.
- Rensning: After each use, rinse the beaker thoroughly with gasoline or a suitable solvent to remove oil residues, then wash with soap and water. Ensure all residues are removed to prevent contamination of future mixtures.
- Tørring: Allow the beaker to air dry completely before storing.
- Opbevaring: Store the beaker in a clean, dry place, away from direct sunlight and extreme temperatures. Keep the cap on to prevent dust and debris from entering.
- Inspektion: Periodically inspect the beaker for cracks, discoloration, or fading of markings. If the markings are no longer clearly visible or if the plastic is compromised, replace the beaker.
Fejlfinding
This section addresses common issues you might encounter with your measuring beaker.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Markings are difficult to read. | Dirt, oil residue, or fading due to prolonged exposure to sunlight/chemicals. | Clean the beaker thoroughly. If markings are faded, consider replacing the beaker for accurate measurements. |
| Beaker leaks. | Crack in the plastic or damaged cap. | Inspect for cracks. If found, discontinue use and replace the beaker. Ensure the cap is securely fastened. |
| Mixture appears incorrect. | Incorrect reading of markings or improper mixing technique. | Review the "Operating Instructions" section. Ensure you are reading the markings at eye level and mixing thoroughly. |
Specifikationer
- Model: Polini 121.100
- Kapacitet: 100 ml
- Materiale: Plast
- Mixture Ratios Supported: 2% (for up to 4L gasoline), 4% (for up to 2L gasoline)
- Vægt: Approximately 200 g (as per product specifications)
- Dimensioner: Approximately 40 x 40 x 40 cm (packaging dimensions, actual product dimensions will be smaller)
Garantioplysninger
Specific warranty details for the Polini 100ml Measuring/Mixing Beaker are typically provided by the retailer or manufacturer at the time of purchase. Please retain your proof of purchase for any warranty claims. For general inquiries regarding Polini products, please refer to the official Polini webwebstedet eller kontakt din lokale forhandler.
Støtte
For technical support or further assistance with your Polini Measuring/Mixing Beaker, please contact the retailer from whom you purchased the product. You may also visit the official Polini website for product information and contact details.
Polini Official Webwebsted: www.polini.com (Note: This is a generic link, please verify the actual official website for Polini if available.)
