1. Introduktion
The SilverStone Vista 140 ARGB is a 140mm PWM fan designed for efficient computer cooling. It features a 4-pin PWM control for precise fan speed regulation, a hydraulic bearing for quiet operation, and optimized fan blades to deliver both high airflow and static pressure. This fan also incorporates eight individually addressable RGB (ARGB) LEDs, allowing for customizable lighting effects. These ARGB LEDs can be controlled via a compatible ARGB controller or an ARGB-capable motherboard using standard 4-1 pin ARGB connectors.
Image 1.1: The SilverStone Vista 140 ARGB fan showcasing its customizable rainbow lighting effects.
2. Produktfunktioner
- Addressable RGB Lighting: Standard 4-1 pin ARGB lighting, synchronized via an ARGB controller or ARGB compatible motherboards.
- Optimeret ydeevne: Delivers high airflow and static pressure suitable for various cooling applications.
- PWM kontrol: Wide 0~1,600 RPM speed range via PWM control for tailored performance on demand.
- Stille drift: Hydraulic bearing reduces friction and maintains low operational noise levels.
- Vibrationsreduktion: Integrated rubber padding helps to further reduce vibrational noise.
Image 2.1: Hybrid Performance - A visual representation of the fan's balanced airflow and air pressure capabilities.
Image 2.2: PWM Control - A graph illustrating the fan's speed range from 0 to 1,600 RPM controlled by PWM duty cycle.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- SilverStone Vista 140 ARGB Fan
- Cables (PWM and ARGB connectors)
4. Opsætning og installation
Follow these steps to properly install your SilverStone Vista 140 ARGB fan:
- Forbered monteringssted: Identify the desired mounting location within your computer case, heatsink, or radiator. Ensure there is sufficient space and proper airflow direction.
- Monter blæseren: Secure the fan to the mounting location using appropriate screws. The integrated rubber padding on the fan corners helps reduce vibration.
- Tilslut PWM-kabel: Locate the 4-pin PWM fan header on your motherboard. Connect the fan's 4-pin PWM cable to this header. This allows the motherboard to control the fan speed based on system temperature.
- Tilslut ARGB-kablet: Locate a 4-1 pin (3-pin, 5V) Addressable RGB header on your motherboard or an external ARGB controller. Connect the fan's ARGB cable to this header. Ensure correct pin orientation to avoid damage.
- Kabelstyring: Route cables neatly to prevent interference with other components and to maintain good airflow within the case.
Image 4.1: Fan corner with anti-vibration rubber padding.
Image 4.2: 4-pin PWM connector for fan speed control.
Image 4.3: 4-1 pin ARGB connector for lighting control.
5. Betjeningsvejledning
Once installed, the SilverStone Vista 140 ARGB fan operates as follows:
- Ventilatorhastighedskontrol (PWM): The fan speed is automatically regulated by your motherboard's BIOS/UEFI settings or operating system software, based on the temperature of your system components. You can typically adjust fan curves in your motherboard's software or BIOS to customize performance.
- ARGB-lysstyring: The Addressable RGB lighting can be controlled using your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or an external ARGB controller. Refer to your motherboard or controller manual for specific instructions on customizing lighting effects.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din ventilator:
- Fjernelse af støv: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the computer is powered off and unplugged before cleaning.
- Inspektion: Check for any obstructions around the fan or damage to the cables.
7. Fejlfinding
Hvis du støder på problemer med din ventilator, skal du overveje følgende:
- Ventilatoren drejer ikke:
- Ensure the 4-pin PWM cable is securely connected to the motherboard fan header.
- Check BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- Kontroller, at strømforsyningen fungerer korrekt.
- Ingen ARGB-belysning:
- Confirm the 4-1 pin ARGB cable is correctly connected to a 5V ARGB header (not a 12V RGB header). Incorrect connection can damage the LEDs.
- Ensure your motherboard's ARGB software or external controller is properly installed and configured.
- Check for any physical damage to the ARGB cable or LEDs.
- Overdreven støj:
- Sørg for, at ventilatoren er sikkert monteret og ikke vibrerer mod kabinettet.
- Rengør eventuelt støvophobning på ventilatorbladene.
- Check fan speed settings in BIOS/UEFI; higher RPMs generate more noise.
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Sølvsten |
| Modelnummer | SST-VS140B-ARGB |
| Fan Dimensions (LxWxH) | 5.51 x 5.51 x 0.98 tommer (140 x 140 x 25 mm) |
| Varens vægt | 1 pund |
| Strømstik type | 4-benet PWM |
| ARGB-stiktype | 4-1 pin (3-pin, 5V) Addressable RGB |
| Voltage | 12 volt |
| Afkølingsmetode | Ventilator |
| Kompatible enheder | Radiator, PC Case |
| Materiale | Rubber (for padding) |
| Maksimal rotationshastighed | 1600 RPM |
| Luftmængde kapacitet | 86 kubikfod pr. minut (CFM) |
| Støjniveau | 0~30.8 dBA |
9. Garanti og support
SilverStone Technology products are designed for reliability and performance. For warranty information and technical support, please refer to the official SilverStone Technology webhjemmeside eller kontakt deres kundeservice direkte.
Du kan finde flere oplysninger og supportressourcer ved at besøge SilverStone-butikken på Amazon.
