Brugermanual til Silonn ismaskine og Brita vandfilterdispenserpakke

Indledning

This manual provides comprehensive instructions for the safe and efficient use of your Silonn Ice Maker and Brita Water Filter Dispenser Bundle. Please read all instructions carefully before operating the appliances and retain this manual for future reference.

Image: The Silonn Ice Maker and Brita Water Filter Dispenser, shown together as a bundle.

Sikkerhedsoplysninger

Følg altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.

• Sørg for, at strømforsyningen matcher voltage krav til apparatet.
• Do not immerse the ice maker in water or other liquids.
• Hold hænder og fremmedlegemer væk fra ismaskinen under drift.
• Place the ice maker on a stable, level surface away from direct sunlight and heat sources.
• Only use potable water in both the ice maker and water dispenser.
• Keep the Brita dispenser away from extreme temperatures.

Opsætning

Silonn Ice Maker Setup

1. Udpakning: Carefully remove the ice maker from its packaging. Inspect for any damage.
2. Placering: Position the ice maker on a flat, stable countertop. Ensure adequate ventilation around the unit.
3. Indledende rengøring: Before first use, it is recommended to run the self-cleaning cycle. Refer to the 'Maintenance' section for detailed instructions.
4. Vandpåfyldning: Open the water reservoir lid and fill with potable water up to the maximum fill line. Do not overfill.
5. Strømtilslutning: Sæt netledningen i en jordet stikkontakt.

Image: The Silonn countertop ice maker, ready for setup.

Brita Water Filter Dispenser Setup

1. Vask: Wash the dispenser, lid, and reservoir by hand with mild soap and rinse thoroughly. Do not wash the filter.
2. Filterforberedelse: The Brita Standard Filter does not require pre-soaking.
3. Filter Insertion: Insert the filter firmly into the reservoir until it clicks into place.
4. Fyldning: Fill the reservoir with cold tap water. The water will filter through to the main body of the dispenser.

Image: The Brita XL Water Filter Dispenser with a filter, ready for assembly.

Betjeningsvejledning

Silonn Ice Maker Operation

1. Tænd: Press the 'ON/OFF' button on the control panel.
2. Vælg isstørrelse: Use the 'SELECT' button to choose between small or large bullet-shaped ice cubes. The indicator light will show your selection.
3. Isproduktion: The ice maker will begin producing ice. The first batch of 9 cubes is typically ready in approximately 6 minutes.
4. Isopsamling: Ice will drop into the ice basket. When the basket is full, the 'ICE FULL' indicator will illuminate, and the machine will pause production.
5. Vandpåfyldning: If the water level is low, the 'ADD WATER' indicator will light up. Refill the reservoir to continue ice production.
6. Sluk: Press the 'ON/OFF' button to turn off the ice maker.

Billede: Nærbillede view of the Silonn ice maker's internal components showing ice being formed, with text indicating 6 minutes for 9 pieces of ice.

Brita Water Filter Dispenser Operation

1. Dispensering af vand: Use the easy-pour spigot located at the bottom of the dispenser to get filtered water.
2. Genopfyldning: When the water level is low, simply lift the lid and pour cold tap water into the reservoir.
3. Filterindikator: The dispenser features a filter indicator to remind you when it's time to change the Brita water filter.

Image: Diagram illustrating the Brita dispenser's 27-cup capacity, with 9 cups in the reservoir and 18 cups in the body.

Opretholdelse

Silonn Ice Maker Maintenance

• Selvrensende funktion: To activate, ensure the water reservoir is filled. Press and hold the 'CLEAN' button (if available, or refer to specific model instructions for self-cleaning). The machine will run a cleaning cycle.
• Afløbsvand: Regularly drain any remaining water from the reservoir using the drain plug located at the bottom of the unit.
• Udvendig rengøring: Tør ydersiden af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler.
• Iskurv og isske: Wash the ice basket and scoop with mild soap and water, then rinse and dry thoroughly.

Brita Water Filter Dispenser Maintenance

• Rensning: Hand wash the dispenser, lid, and reservoir regularly with mild soap and water.
• Filterudskiftning: Replace the Brita Standard Filter every 40 gallons or approximately every 2 months, based on average family usage. Follow the filter indicator for optimal performance.

Image: Diagram highlighting the Brita dispenser's features such as easy to fill and clean, BPA-free construction, and fridge-friendly size.

Fejlfinding

Før du kontakter kundeservice, bedes du læse følgende almindelige problemer og løsninger:

Specifikationer

Silonn Ice Maker

• Isproduktion: 9 cubes in 6 minutes
• Daglig kapacitet: Up to 26 lbs (11.8 kg) in 24 hours
• Isform: Kugle
• Isstørrelser: 2 (Small, Large)
• Installationstype: Bordplade
• Voltage: 115 volt
• Støjniveau: Mindre end 35dB
• Kølemiddel: R600a
• Funktioner: Self-cleaning function, transparent lid, indicator lights

Billede: En eksploderet view of the Silonn ice maker highlighting bullet-shaped ice cubes, advanced infrared sensor, and ultra-efficiency compressor.

Brita Water Filter Dispenser

• Kapacitet: 27 cups total (9-cup reservoir, 18-cup body)
• Materiale: BPA-fri plast
• Filtertype: Brita Standard Filter
• Filterlevetid: Cirka 40 gallon eller 2 måneder
• Filtrering: Reduces chlorine (taste & odor), mercury, copper, and more
• Funktioner: Filter indicator, easy-pour spigot, fridge-friendly size

Garanti og support

For specific warranty details, please refer to the documentation included with your product or visit the manufacturer's official website. Silonn offers US-based phone service for customer support.

For yderligere hjælp kan du besøge Silonn Store on Amazon.