1. Introduktion
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Festool 577616 Impact Driver and Drill Set. This set includes the TID 18 HPC Cordless Impact Screwdriver and the QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill. Designed for versatility and flexibility on the job site, these tools are suitable for various drilling and driving tasks in multiple materials.
Figur 1: Overview of the Festool 577616 Impact Driver and Drill Set components.
2. Vigtige sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for elektrisk stød, brand og alvorlig personskade.
- Læs alle instruktioner: Gør dig bekendt med værktøjets betjenings- og sikkerhedsretningslinjer inden brug.
- Bær personlige værnemidler: Always wear eye protection, hearing protection, and suitable gloves.
- Maintain a safe work area: Hold arbejdsområdet rent, godt oplyst og fri for forhindringer.
- Fastgør emnet: Altid clamp eller på anden måde fastgør emnet for at forhindre bevægelse under drift.
- Undgå utilsigtet start: Ensure the switch is in the off-position before inserting the battery pack, picking up or carrying the tool.
- Brug det rigtige værktøj til jobbet: Tving ikke et lille værktøj eller tilbehør til at udføre arbejdet som et kraftigt værktøj.
- Afbryd strømmen: Fjern batteripakken, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
- Gem ledige værktøjer: When not in use, tools should be stored in a dry, high, or locked-up place out of reach of children.
- Inspect tools regularly: Kontroller for skæv justering eller fastbinding af bevægelige dele, brud på dele og andre forhold, der kan påvirke værktøjets funktion.
- Batterisikkerhed: Use only specified battery packs and chargers. Do not incinerate battery packs, even if they are severely damaged.
3. Inkluderede komponenter
The Festool 577616 set includes the following items:
- TID 18 Cordless Impact Screwdriver
- QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill
- Two (2) BP 18 Li 4.0 ASI Battery Packs
- Rapid Charger TCL 6
- FastFix Keyless Chuck (1/2”/13mm)
- FastFix Right Angle Chuck
- Additional Side Mounted Handle
- Bælteclips
- Systainer SYS3 M 237 storage case
Figur 2: Detaljeret view of the TID 18 Impact Driver, TPC 18/4 Hammer Drill, and various chucks.
4. Opsætning og første brug
4.1. Charging the Battery Packs
- Connect the Rapid Charger TCL 6 to a suitable power outlet.
- Slide a BP 18 Li 4.0 ASI Battery Pack onto the charger until it clicks into place.
- The charger's indicator light will show the charging status. A solid green light indicates a full charge.
- Når batteriet er fuldt opladet, skal det tages ud af opladeren.
Figure 3: Festool BP 18 Li 4.0 ASI Battery Packs.
4.2. Montering af tilbehør
Both the TID 18 and TPC 18/4 feature the FastFix system for quick accessory changes.
- FastFix Keyless Chuck (1/2”/13mm): For standard drilling and driving bits. Align the chuck with the spindle and twist to secure.
- FastFix Right Angle Chuck: For working in confined spaces. Attach similarly to the keyless chuck.
- Additional Side Mounted Handle: For increased control and stability, especially with the TPC 18/4. Attach to the designated collar on the drill.
- Bælteklips: Can be attached to either side of the tool for convenient carrying.
5. Betjening
5.1. TID 18 Cordless Impact Screwdriver
The TID 18 is designed for efficient fastening with its powerful brushless EC-TEC motor.
- Hastighedsniveauer: The tool features three speed levels for various applications. Select the appropriate speed using the speed selector switch.
- T Mode: Utilize the specialized T mode for self-tapping screws, which helps prevent overtightening and stripping.
- Kickback-Free Hammer Mechanism: This mechanism drives fasteners effectively, reducing user fatigue and improving control.
- Bitsholder: The tool has a tool-free 1/4-inch bit holder and integrated bit storage for convenience.
- LED belysning: An optimum LED light illuminates the work area.
Figure 4: Using the TID 18 Impact Driver for fastening applications.
5.2. QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill
The TPC 18/4 is a versatile drill for drilling into various materials, including masonry with its percussion function.
- Drilling Modes: Switch between drilling, hammer drilling, and screwdriving modes as required by the application.
- Hastighedskontrol: Adjust the speed for optimal performance based on the material and bit size.
- Ergonomi: The compact design and optional side handle allow for accurate and comfortable work, even in hard-to-reach areas.
Figure 5: The TPC 18/4 Hammer Drill in use.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your Festool tools.
- Rensning: Keep ventilation openings clear and clean. Use a soft, damp cloth to wipe down the tool exterior. Do not use harsh chemicals or abrasive cleaners.
- Batteripleje: Store battery packs in a cool, dry place. Avoid fully discharging lithium-ion batteries for extended periods.
- Opbevaring: Store the tools and accessories in the Systainer SYS3 M 237 case in a dry, secure location away from direct sunlight and extreme temperatures.
- Inspektion: Periodically check all screws and fasteners for tightness. Inspect power cords (for charger) for damage.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet starter ikke. | Batteriet er ikke isat korrekt eller afladet. | Sørg for, at batteriet er korrekt isat. Oplad batteriet om nødvendigt. |
| Reduceret effekt eller ydeevne. | Low battery charge, incorrect speed setting, or dull bit/accessory. | Charge battery. Select higher speed. Replace or sharpen bit. |
| Værktøjet overopheder. | Overbelastning af værktøjet eller blokeret ventilation. | Reduce load. Allow tool to cool. Clean ventilation openings. |
| Borepatronen holder ikke boret sikkert fast. | Chuck not tightened properly or damaged. | Ensure chuck is fully tightened. Inspect chuck for damage; replace if necessary. |
For issues not listed here, please contact Festool Service.
8. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Festool |
| Modelnummer | 577616 |
| Strømkilde | Batteridrevet |
| Voltage | 18 volt |
| Batterikapacitet | 4 Amp Hours (each BP 18 Li 4.0 ASI) |
| Maksimal rotationshastighed | 3.6E+2 RPM (360 RPM) |
| Antal hastigheder | 3 |
| Maksimal effekt | 850 watt |
| Boretype | Hammer Drill (TPC 18/4) |
| Borekapacitet Træ | 0.5 tommer |
| Borekapacitet Metal | 0.5 tommer |
| Varens vægt | 17.91 Pounds (total set) |
| Produktdimensioner | 15.59 cm L x 11.65 cm B x 9.33 cm H |
9. Garantioplysninger
This Festool product is covered by a 3 års producentgaranti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full details on warranty terms and conditions, please refer to the official Festool warranty documentation or contact Festool Service.
10. Kundesupport
For technical assistance, service, or spare parts, please contact Festool Service. Detailed contact information can be found on the official Festool website or through your authorized Festool dealer. Festool is committed to providing comprehensive support for its products.
Visit the official Festool store for more information: Festool-butik på Amazon
