1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your KKnoon Teleheer T6 Plus Motorcycle Helmet Bluetooth Headset Intercom. This device is designed to provide clear, full-duplex real-time communication for multiple riders, along with Bluetooth connectivity for phone calls and music playback, enhancing your riding experience.

Figure 1.1: KKnoon Teleheer T6 Plus Intercom Units
This image displays two individual KKnoon Teleheer T6 Plus intercom units, highlighting their compact form factor and the layout of the control buttons, including power, volume, and phone/intercom functions.
2. Sikkerhedsoplysninger
Please read and understand all safety warnings and instructions before using this product. Failure to follow these instructions may result in injury or damage to the device.
- Prioritér altid trafiksikkerhed. Brug ikke enheden på en måde, der distraherer dig fra kørslen.
- Maintain appropriate volume levels to ensure you can hear ambient traffic sounds.
- Forsøg ikke at skille enheden ad eller ændre den. Dette kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
- Hold enheden væk fra ekstreme temperaturer, direkte sollys og ætsende materialer.
- Sørg for, at enheden er sikkert monteret på din hjelm, inden du kører.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er til stede i din produktpakke:
- Teleheer T6 Plus Intercom Unit(s)
- Hjelm højtalere
- Boom Microphone / Soft Wire Microphone (depending on helmet type)
- Mounting Clip / Adhesive Mount
- USB Type-C opladerkabel
- Brugermanual
- Velcro Pads for Speakers/Microphone

Figur 3.1: Komponentdiagram
This diagram illustrates the main components of the intercom system, including the headset unit with its Type-C port, volume controls, indicator light, power button, phone/intercom button, connection key, and the connected speakers and microphone. A separate fixing clip is also shown.
4. Produktfunktioner
The KKnoon Teleheer T6 Plus Intercom offers a range of features designed for motorcycle communication:
- Full Duplex Real-time Intercom: Supports multi-person communication simultaneously.
- Bluetooth-forbindelse: Seamless pairing with smartphones for calls and music.
- Høj lydkvalitet: Designed to reduce wind noise for clear audio even at speed.
- Vandtæt Design: IP65 level deep waterproof for reliable performance in various weather conditions.
- Letvægtskonstruktion: Ensures comfort during long rides.
- Nem installation: Simple mounting options for various helmet types.

Figure 4.1: Full Duplex Intercom Capability
This image shows two riders communicating via their helmet intercoms, illustrating the full duplex real-time intercom feature that allows simultaneous conversation.

Figure 4.2: High Sound Quality
This image depicts a motorcyclist with sound wave graphics around their helmet, emphasizing the product's high sound quality and ability to reduce wind noise for clear audio during rides.

Figur 4.3: IP65 vandtæthedsklassificering
This image demonstrates the intercom unit's IP65 waterproof capability, showing it partially submerged in water, indicating its resistance to dust and water ingress.
5. Opsætning og installation
Follow these steps to install the intercom system on your helmet:
- Vælg monteringssted: Select a suitable flat surface on the left side of your helmet.
- Fastgør monteringsklips:
- Clip Mount: Slide the clip between the helmet shell and the inner padding. Secure it firmly.
- Klæbende montering: Clean the helmet surface thoroughly. Peel off the protective film from the adhesive mount and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to cure before use.
- Monter intercom-enhed: Skub intercom-enheden på den monterede klips, indtil den klikker på plads.
- Installer højttalere:
- Locate the ear pockets inside your helmet.
- Attach the Velcro pads to the back of the speakers and then firmly press the speakers into the ear pockets, ensuring they are centered over your ears for optimal sound.
- Installer mikrofon:
- Boom-mikrofon: For open-face or modular helmets, attach the boom microphone to the inside of the helmet near your mouth using the Velcro.
- Blød trådmikrofon: For full-face helmets, route the soft wire microphone along the helmet padding and attach it to the chin bar area, ensuring it is close to your mouth and not obstructed.
- Tilslut kabler: Plug the speaker and microphone cable into the appropriate Type-C port on the intercom unit. Ensure a secure connection.
6. Betjeningsvejledning
6.1. Tænd/sluk
- Tænd: Tryk og hold på Power knap (⏻) for approximately 3 seconds until the indicator light flashes.
- Sluk: Tryk og hold på Power knap (⏻) for approximately 3 seconds until the indicator light turns off.
6.2. Bluetooth-parring med telefon
- Ensure the intercom unit is powered off.
- Tryk og hold på Power knap (⏻) for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your mobile phone, enable Bluetooth and search for new devices.
- Select "Teleheer T6 Plus" from the list of available devices.
- Once paired, the indicator light will flash blue slowly.
6.3. Intercom Pairing (Multi-Person)
The T6 Plus supports multi-person intercom. Follow these steps to pair multiple units:
- Ensure all intercom units are powered off.
- On the first unit (Unit A), press and hold the Intercom knap (often combined with Phone button, refer to diagram) for 5 seconds until it enters pairing mode (e.g., fast blue flash).
- On the second unit (Unit B), press and hold its Intercom knap i 5 sekunder.
- Once Unit A and Unit B are paired, their indicator lights will change (e.g., slow blue flash).
- To add a third unit (Unit C), repeat the process: put Unit A into intercom pairing mode, then put Unit C into intercom pairing mode. Unit A will connect to Unit C.
- Continue this process for all desired units. The connection sequence is typically A-B, A-C, A-D, etc., forming a chain.
- To initiate intercom conversation, briefly press the Intercom knap on any connected unit.
6.4. Phone Call Management
- Besvar opkald: Tryk kort på Phone/Intercom Button (☎) når der kommer et opkald.
- Afslut opkald: Tryk kort på Phone/Intercom Button (☎) under et opkald.
- Afvis opkald: Tryk og hold på Phone/Intercom Button (☎) i 2 sekunder, når der kommer et opkald ind.
- Genopkald sidste nummer: Dobbelttryk på Phone/Intercom Button (☎) in standby mode.
6.5. Musikafspilning
- Afspil/pause: Tryk kort på Phone/Intercom Button (☎) while music is playing.
- Næste nummer: Tryk kort på Lydstyrke + knap (+).
- Forrige nummer: Tryk kort på Lydstyrke - knap (-).
6.6. Lydstyrkejustering
- Forøg lydstyrke: Tryk på Lydstyrke + knap (+).
- Skru ned for lydstyrken: Tryk på Lydstyrke - knap (-).
7. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your intercom system:
- Rensning: Brug en blød, damp cloth to wipe the exterior of the unit. Do not use harsh chemicals or abrasive cleaners. Ensure the Type-C port cover is securely closed when not charging to prevent dust and water ingress.
- Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares et køligt og tørt sted.
- Batteripleje: Charge the battery fully before first use. For long-term storage, charge the battery to about 50% every 3-6 months to preserve battery life. Avoid fully discharging the battery frequently.
- Kabelstyring: Ensure all cables are routed neatly within the helmet to prevent pinching or damage.
8. Fejlfinding
If you encounter issues with your Teleheer T6 Plus, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Lavt batteri; forkert tryk på tænd/sluk-knappen. | Charge the device fully. Press and hold the Power Button for 3 seconds. |
| Kan ikke parres med telefonen. | Enhed ikke i parringstilstand; Bluetooth slukket på telefonen; interferens. | Ensure device is in pairing mode (red/blue flash). Turn phone Bluetooth off/on. Move away from other Bluetooth devices. |
| Intercom forbinder ikke. | Units not in intercom pairing mode; too far apart. | Ensure both units are in intercom pairing mode. Bring units closer together. Re-pair if necessary. |
| Ingen lyd fra højttalere. | Speakers not connected; volume too low; faulty speakers. | Check speaker connection to the unit. Increase volume. Test with another audio source if possible. |
| Mikrofon virker ikke. | Microphone not connected; microphone obstructed. | Check microphone connection. Ensure microphone is positioned correctly and not blocked. |
9. Specifikationer
Key technical specifications for the KKnoon Teleheer T6 Plus Intercom:
- Model: ZUP8884309864143RT
- Forbindelse teknologi: Trådløs (Bluetooth)
- Formfaktor: On Ear (for speakers)
- Materiale: Plast
- Særlige funktioner: Lightweight, Waterproof (IP65)
- Anbefalede produktanvendelser: Calling, Intercom Communication
- Kompatible enheder: Motorcycles, Smartphones
- Kontroltype: Media Control (Volume, Play/Pause, Call Answer/End)
- Pakkedimensioner: 12.09 x 9.7 x 6.4 cm
- Pakkevægt: 259 g
- Fabrikant: KKmiddag
- Første tilgængelige dato: 3. juni 2023
10. Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact KKnoon customer service through their official channels. Keep your proof of purchase for warranty claims.