Indledning
Thank you for choosing the Be Cool 121 cm Tower Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before use and keep it for future reference.
Billede: Forside view of the Be Cool 121 cm Tower Fan in white, showcasing its sleek design and tall profile.
Vigtige sikkerhedsoplysninger
- Sørg altid for, at ventilatoren er placeret på en stabil, plan overflade for at forhindre den i at vælte.
- Do not insert fingers or any objects into the fan grilles.
- Tag ventilatorens stik ud af stikkontakten, før du rengør eller udfører vedligeholdelse.
- Keep the fan away from water and high humidity environments.
- Brug ikke ventilatoren med en beskadiget ledning eller stik. Kontakt kvalificeret servicepersonale for reparation.
- Dette apparat er kun til indendørs brug.
Pakkens indhold
Kontroller venligst pakkens indhold ved åbning for at sikre, at alle varer er til stede og ubeskadigede:
- Be Cool 121 cm Tower Fan Unit
- Bund (to halvdele)
- Remote Control (with 1 CR2430 battery included)
- Brugermanual
- Mounting Screws for Base
Opsætning og montering
Follow these steps to assemble your Be Cool Tower Fan:
- Carefully remove all packaging materials from the fan unit and its components.
- Take the two halves of the base and align them. They should snap together or fit snugly.
- Place the main fan unit onto the assembled base, ensuring the alignment tabs or slots match.
- Secure the fan unit to the base using the provided screws. Typically, these are tightened from the underside of the base.
- Placer den samlede ventilator på en fast, plan overflade.
- Insert the CR2430 battery into the remote control if not already pre-installed.
- Sæt netledningen i en almindelig stikkontakt (220V).
Billede: Side view of the Be Cool Tower Fan, illustrating its slim profile and stable circular base.
Betjeningsvejledning
Your Be Cool Tower Fan can be operated using the touch control panel on top of the unit or the included remote control.
Kontrolpanel og LED-skærm
Image: Close-up of the fan's top control panel, showing the touch buttons for Power, Speed, Timer, Oscillation, and Mode.
Billede: Detaljeret view of the fan's LED display, showing temperature, mode icons (Nature, Sleep), and oscillation indicator.
The LED display shows the current room temperature and active settings. The touch-sensitive buttons allow for easy control of all functions.
Fjernbetjening
Image: The remote control for the Be Cool Tower Fan, featuring buttons for Power, Speed, Oscillation, Ionizer, Timer, and Mode.
The remote control provides convenient access to all fan functions from a distance.
- MAGT: Tænder eller slukker ventilatoren.
- HASTIGHED: Skifter mellem ventilatorhastigheder: Lav, Mellem, Høj.
- OSC (Oscillation): Activates or deactivates the oscillating function, allowing the fan to rotate from side to side to distribute air.
- ION (Ionizer): Turns the ionizer function On or Off. The ionizer helps to purify the air by releasing negative ioner.
- TIMER: Sets the automatic shut-off timer. Press repeatedly to cycle through 1-hour increments, up to 12 hours.
- KØRSELSVEJLEDNING: Cycles through different wind modes:
- Normal tilstand: Konstant luftstrøm ved den valgte hastighed.
- Naturtilstand: Simulerer naturlig brise ved at variere ventilatorhastigheden.
- Sove mode: Sænker gradvist ventilatorhastigheden over tid for at opnå stille drift under dvale.
Opretholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din ventilator.
Rensning
- Tag altid ventilatoren ud af stikkontakten før rengøring.
- Brug en blød, damp klud til at tørre ventilatorens udvendige overflader af. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Use a vacuum cleaner with a brush attachment to gently clean dust from the air inlet and outlet grilles.
- Nedsænk ikke ventilatoren i vand, og lad ikke vand dryppe ind i motorhuset.
Opbevaring
Når ventilatoren ikke er i brug i længere perioder, skal den opbevares et køligt og tørt sted, helst i originalemballagen, for at beskytte den mod støv og skader.
Fejlfinding
Hvis du støder på problemer med din ventilator, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ventilatoren tænder ikke. | Ingen strømforsyning; netledningen er ikke sat i; stikkontakten er defekt. | Ensure the fan is properly plugged into a working electrical outlet. Check the circuit breaker. |
| Svag luftstrøm. | Fan speed set too low; air inlets/outlets blocked by dust. | Increase the fan speed. Clean the air grilles as per maintenance instructions. |
| Ventilatoren laver usædvanlig lyd. | Fan not on a stable surface; foreign object inside; internal component issue. | Place the fan on a stable, flat surface. Unplug and check for any obstructions. If noise persists, contact customer support. |
| Fjernbetjening virker ikke. | Battery depleted or incorrectly inserted; remote out of range. | Replace the battery (CR2430). Ensure the remote is pointed towards the fan's receiver and within range. |
If the problem persists after trying these solutions, please contact Be Cool customer support for assistance.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Vær cool |
| Modelnummer | BC121TU2201F |
| Farve | Hvid |
| Dimensioner (produkt) | 31.5D x 31.5B x 121H cm |
| Vægt | 3.5 kilo |
| Magt | 45 watt |
| Voltage | 220V |
| Materiale | Plast |
| Antal hastigheder | 3 (Lav, Medium, Høj) |
| Særlige funktioner | Ionizer, LED Display, Oscillation, Timer (up to 12h), Remote Control |
| Controller type | Fjernbetjening, berøringspanel |
| Strømkilde | Netstrøm |
Garanti og support
Your Be Cool Tower Fan comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact Be Cool customer service through their official webwebstedet eller kontaktoplysningerne på din købskvittering.
