Deaf Bonce Apocalypse DB-SA252 D1 12-tommer subwoofer brugsanvisning

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Deaf Bonce Apocalypse DB-SA252 D1 12-inch Subwoofer. Please read this manual thoroughly before attempting to install or operate the subwoofer to ensure optimal performance and safety. This subwoofer is designed for high-performance audio systems, delivering powerful bass reproduction.

Figur 1: Forside view of the Deaf Bonce Apocalypse DB-SA252 D1 12-inch Subwoofer.

2. Sikkerhedsoplysninger

• Frakobl altid køretøjets batteri, før du udfører elektrisk arbejde.
• Ensure proper wiring and connections to prevent damage to the subwoofer, ampeller køretøjets elektriske system.
• Undgå at udsætte subwooferen for fugt eller ekstreme temperaturer.
• Do not operate the subwoofer beyond its specified power handling limits (RMS/MAX) to prevent damage.
• Monter subwooferen sikkert for at forhindre bevægelse under kørsel.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• 1x Deaf Bonce Apocalypse DB-SA252 D1 12-inch 2000 Watt Dual 1 Ohm Subwoofer

4. Installation og opsætning

4.1 Monteringsovervejelser

Proper mounting is crucial for both performance and safety. Ensure the subwoofer is securely fastened within its enclosure and the enclosure is stable within the vehicle. Consider the following dimensions for installation:

• Monteringsdybde: 6.6 tommer
• Monteringsbredde: 11 tommer
• Samlet højde: 8 tommer
• Samlet diameter: 12.6 tommer

4.2 Ledningsføring

The DB-SA252 D1 features a dual 1 Ohm voice coil. Proper wiring to your amplifier is essential to achieve the desired impedance and prevent damage. Consult your amplifier's manual for compatible impedance loads. Common wiring configurations for dual voice coil subwoofers include:

• Serie ledninger: Connect the two 1 Ohm voice coils in series to achieve a 2 Ohm load.
• Parallel ledninger: Connect the two 1 Ohm voice coils in parallel to achieve a 0.5 Ohm load. (Note: Ensure your amplifier is stable at 0.5 Ohm before attempting this configuration.)

Figur 2: Bagside view showing the subwoofer's terminals for wiring connections.

4.3 Recommended Enclosure Parameters

For optimal acoustic performance, it is highly recommended to install the subwoofer in a properly designed enclosure. The following table provides recommended parameters for a bass reflex (ported) enclosure for the DB-SA252 D1 model:

Figure 3: Recommended enclosure parameters for various Deaf Bonce subwoofer models, including the DB-SA252 D1/D2.

Based on the provided image, for the DB-SA252 D1/D2 model:

• Recommended Volume: 50 liter / 1.8 ft³
• Havneområde: 150 cm² / 23 inch²
• Portlængde: 62 cm / 24.4 tommer
• Hz Setting (Tuning Frequency): 35 Hz

These parameters are guidelines. Fine-tuning may be required based on your specific vehicle acoustics and personal preferences.

5. Betjeningsvejledning

5.1 Indkøringsperiode

Allow a break-in period of approximately 10-20 hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components to loosen and reach their optimal performance characteristics.

5.2 Strømhåndtering

The subwoofer has an RMS power rating of 1000 Watts and a MAX power rating of 2000 Watts. Ensure your amplifier's output matches these ratings to prevent underpowering or overpowering, both of which can lead to damage.

5.3 Amplifier indstillinger

Properly adjust your amplifier's gain, crossover, and bass boost settings. Start with low gain and gradually increase it until the desired volume is reached without distortion. Set the low-pass filter (LPF) to prevent high frequencies from reaching the subwoofer, typically between 60-100 Hz, depending on your system's other speakers.

6. Vedligeholdelse

Regular maintenance ensures the longevity and performance of your subwoofer:

• Rensning: Use a soft, dry cloth to clean the cone and surround. Avoid using harsh chemicals or excessive moisture.
• Inspektion: Periodically check all wiring connections for tightness and corrosion. Inspect the subwoofer's cone and surround for any signs of damage or wear.
• Miljø: Keep the subwoofer in a dry, stable environment, away from direct sunlight and extreme temperature fluctuations.

7. Fejlfinding

Hvis du støder på problemer med din subwoofer, kan du se følgende almindelige problemer og løsninger:

• Ingen lyd:
  • Check all power, ground, and remote turn-on connections to the amplivligere.
  • Verify RCA signal cables are securely connected to both the head unit and amplivligere.
  • Sørg for ampApparatet er tændt (indikatorlampen skal lyse).
  • Check the subwoofer's voice coil wiring for proper connection and continuity.
• Forvrænget lyd:
  • Reducer amplifiers forstærkningsindstilling.
  • Check for proper crossover settings; high frequencies can cause distortion.
  • Ensure the subwoofer is not over-excursing (moving too far).
  • Inspect the subwoofer cone and surround for physical damage.
• Overophedning:
  • Sørg for amplifier is stable at the connected impedance.
  • Verify adequate ventilation for the amplifier og subwoofer.
  • Reduce prolonged high-volume operation.

If problems persist, consult a professional car audio installer or contact Deaf Bonce customer support.

8. Specifikationer

Detailed technical specifications for the Deaf Bonce Apocalypse DB-SA252 D1 Subwoofer:

9. Garanti og support

This Deaf Bonce Apocalypse DB-SA252 D1 Subwoofer comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official Deaf Bonce website. For technical support, troubleshooting assistance, or warranty claims, please contact Deaf Bonce customer service through their official channels.