SONICAKE Warped Dimension Modulation Guitar Effektpedal Brugermanual

1. Introduktion

The SONICAKE Warped Dimension is a versatile modulation guitar effects pedal designed to offer a range of high-quality modulation effects. This pedal combines four classic modulation modes: Chorus, Flanger, Phaser, and Tremolo, providing diverse tonal options for any musical style. It features a dedicated Tap Tempo function for real-time rate control and a specially designed buffer bypass circuit to maintain signal integrity.

Figure 1: SONICAKE Warped Dimension Modulation Guitar Effects Pedal

2. Nøglefunktioner

• 4-in-1 Modulation: Integrates Chorus, Flanger, Phaser, and Tremolo effects into a single pedal.
• Classic Tones: Reproduces legendary modulation effects.
• Tryk på Tempo: Independent footswitch for real-time rate control.
• Buffer bypass: Maintains pristine sound quality when the effect is disengaged.
• Holdbar konstruktion: Housed in an aluminum-alloy casing for lightweight durability.

3. Betjeningselementer og funktioner

Figur 2: Overview of Pedal Controls

1. Tilstandsvælgerknap: Rotates to select one of the four modulation effects: Chorus, Flanger, Phaser, or Tremolo.
2. DC 9V indgang: Connects to a 9V DC center-negative power supply (not included).
3. Indgangsstik: 1/4-inch audio input for your guitar or other instrument.
4. Niveauknap: Justerer effektens samlede udgangsvolumen.
5. Toneknap: Controls the tone or brightness of the modulated signal.
6. Dybdeknap: Adjusts the intensity or depth of the selected modulation effect.
7. Rate Knob: Controls the speed of the selected modulation effect. This knob is overridden by the Tap Tempo function when active.
8. Udgangsstik: 1/4-inch audio output to your amppedalløfteren eller den næste pedal i kæden.
9. ON/OFF fodkontakt: Engages or disengages the effect. The LED indicates the effect status (on/off).
10. TAP fodkontakt: Used for Tap Tempo. Tap this footswitch two or more times to set the rate of the modulation effect. The LED will blink to indicate the set tempo.

4. Opsætning

To set up your SONICAKE Warped Dimension pedal, follow these steps:

1. Strømtilslutning: Connect a standard 9V DC center-negative power supply (5.5x2.1mm connector) to the DC 9V input jack (2). Ensure the power supply meets the specified voltage og polaritetskrav.
2. Instrumenttilslutning: Connect your guitar or other instrument to the Input Jack (3) using a standard 1/4-inch instrument cable.
3. Udgangsforbindelse: Tilslut udgangsstikket (8) til din amplifer eller den næste pedal i din signalkæde ved hjælp af et standard 6,5 mm instrumentkabel.
4. Tænd: Once all connections are secure, apply power to the pedal. The ON/OFF LED (9) will illuminate when the pedal is active.

Figure 3: DC 9V Center Negative Power Connection

5. Driftstilstande

The pedal offers four distinct modulation modes, selectable via the Mode Selector Knob (1):

• Kor: Produces a rich, shimmering effect by slightly detuning and delaying the original signal.
• Flanger: Creates a sweeping, jet-like sound by mixing a delayed, phase-shifted signal with the original.
• Phaser: Generates a swirling, psychedelic effect by creating phase shifts in the signal.
• Tremolo: Modulerer signalets lydstyrke og skaber en pulserende effekt.

Figure 4: Modulation Mode Selection

Tryk på Tempo-funktion

The Tap Tempo function allows you to set the modulation rate in real-time:

1. Engage the desired modulation effect using the ON/OFF Footswitch (9).
2. Tap the TAP Footswitch (10) two or more times in rhythm with your desired tempo. The LED on the TAP footswitch will blink to indicate the set rate.
3. The Rate Knob (7) will be overridden by the Tap Tempo setting until the pedal is powered off or the rate is manually adjusted again.

Figure 5: Tap Tempo Footswitch

6. Vedligeholdelse

To ensure the longevity and optimal performance of your pedal:

• Hold pedalen ren og fri for støv. Brug en blød, tør klud til rengøring.
• Undgå at udsætte pedalen for ekstreme temperaturer, fugtighed eller direkte sollys.
• Do not attempt to disassemble or repair the pedal yourself, as this may void the warranty.
• Always use the correct power supply (9V DC center-negative) to prevent damage.

7. Fejlfinding

• Ingen lyd: Kontroller alle kabelforbindelser (instrument, amplifier, power). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
• Svag eller forvrænget lyd: Tjek instrumentet og amplifier volume levels. Ensure the Level knob on the pedal is not set too low or too high. Test with different cables.
• Effekt ikke engagerende: Confirm the power supply is connected and providing power. Press the ON/OFF footswitch firmly.
• Modulation Rate Issues: If using Tap Tempo, ensure you have tapped the footswitch at least twice. If not using Tap Tempo, adjust the Rate knob (7).

8. Specifikationer

• Modelnummer: QDS
• Varens vægt: 12.7 ounces (360 gram)
• Produktdimensioner: 4.88 x 3.54 x 2.16 tommer
• Connector Type: 5.5×2.1mm center negative power connector
• Hardwaregrænseflade: 1/4-tommer lyd
• Signalformat: Analog
• Strømkilde: Elektrisk med ledning
• Voltage: 9 volt

9. Produktvideoer

Watch these official product videos for demonstrations and further information:

10. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SONICAKE webwebsted. Gem din købsbevis i tilfælde af garantikrav.